Lenovo Ideapad 110s 11ibr User Guide

Chapter 1. Getting to know your computer
7
Right-side view   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - -   
Combo audio jackConnects to headsets.
Notes:
•The combo audio jack does not support conventional microphones.
• The rec ording function might not be supported if  third-party headphones or headsets are connected, 
due to different industry standards.
USB portsConnect to USB devices.
Note:...

8
Chapter 1. Getting to know your computer
Connecting USB device
Your computer comes with three USB ports compatible with USB devices.
The first time you plug a USB device into a pa rticular USB port on your computer, Windows 
automatically installs a driver for that device. After the driver has been installed, you can 
disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs the driver...

Chapter 1. Getting to know your computer
9
Bottom view  
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - -   
SpeakersProvide audio output. 

10
Chapter 2. Starting to use Windows 10
Note:Windows® 10 has an updated version. If you are using  the updated version, some operations may be 
different. Please refer  to the actual product.
Configuring the operating  system for the first time  
 - - - - - - - - - - - -   
You may need to configure the operat ing system when it is first used.
The configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the...

Chapter 2. Starting to use Windows 10
11

Settings
Settings  lets you perform basic tasks. You can also search for more settings with the settings 
search box in the upper-right corner.
To open the settings, do the following:
• Open the start menu, and then select  Setti

ngs  .
Putting the computer to sl eep or shutting it down  
 - - - - - - - - - - - - - -   
When you have finished working with your comput er, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be...

12
Chapter 2. Starting to use Windows 10
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down the computer, do one of the following:
• Open the start menu, and then select  Power 
  Shut down .
•

Right-click the  Start  butt
 on in the lower-left corner and select  Shut down or sign out  
Sh ut down . 

Chapter 2. Starting to use Windows 10
13
Task and desktop management    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   
 Ta s k  v i e w
To open the task view, do one of the following:
• Select the Task view button 
 on

 the task bar.
• Press the Windows key 
 + Tab

.
Virtual desktop management
Windows 10 supports the ability to create, manage and switch between virtual desktops. 
To create a new virtual desktop, do one of the following:
• Open the...

14
Chapter 2. Starting to use Windows 10
Connecting to a wireless network   
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   
Enabling wireless connection
To enable wireless functions, do the following:
1Press  F7 (  )  to disable airplane mode.
2Click  on the lower-right corner of the task bar to open the network configuration page.
Connecting to a wireless network
After wireless has been enabled, the computer  will automatically scan for available wireless...

15
Chapter 3. Recovery system
Introduction
Push-button reset  is a built-in recovery tool that enables users to restore their operating system 
to its original state. This preserves their data  and important customizations, without the need to 
back up their data in advance.
The following  P
 ush-button reset  features are available to users from multiple locations within 
Windows:
Refreshing the computer
Fixes software problems by reinstalling the fact ory default configuration. This preserves the...

16
Chapter 3. Recovery system
I uninstalled a preinstalled software, but there is no significant increase in the free drive space.
The copy of Windows running on your computer may be WIMBoot-enabled. For computers  with WIMBoot-enabled Windows, the majority of  files needed for preinstalled software are  
installed on the Recovery Partition and won’t be deleted through normal uninstallation.
What happens if I attempt to delete or modify the Recovery Partition?
 Attention: •Do not delete or modify the...