Lenovo Ideapad 100s 14ibr User Guide

							Chapter 1. Getting to know your computer
7

Using  a micro SD card (not supplied)
Your computer supports micr o Secure Digital (SD) cards.
Notes:
•Insert  only o ne card into the slot at a time.
• This car d r eader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a card
Slide the card in until it clicks into place.
Removing a card
1Push the card in until you hear a click.
2Gently pull the memory card out of the slot.
Note:Before removing the memory card, disable it by using the Windows safely remove hardware and eject 
media utility to avoid data corruption. 
						

							8
Chapter 1. Getting to know your computer
Right-side view  
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Combo audio jackConnects to headsets.
Notes:
• The combo audio jack does not support conventional microphones.
• The recording function might not be supported if th ird-party headphones or headsets are connected, 
due to different industry standards.
USB portsConnect to USB devices.
Note: For details, see “Connecting USB device” on page 6. 
						

							Chapter 1. Getting to know your computer
9
Bottom view  
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
SpeakersProvide audio output. 
						

							10
Chapter 2. Starting to use Windows 10
Configuring the operating system for the first time  
 - - - - - - - - - - - - - - - - - 
You may need to configure the operat ing system when it is first used.
The configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection
 Registering the operating system
 Creating a user account
Operating system interface   
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Windows 10 comes with a powerful and useful start menu.
To open the start menu, do one of the following:
 Press the Windows key 
 on

 the keyboard.
 Select  Start 
 on the lower

-left corner of the desktop.
Get Started appStart button
Settings buttonSearch box
Power buttonTask view button
All apps button 
						

							Chapter 2. Starting to use Windows 10
11

Settings
Settings  lets you perform basic tasks. You can also search for more settings with the settings 
search box in the upper-right corner.
To open the settings, do the following:
 Open the start menu, and then select  Settings 
 .
 Personalize the start menu
You can personalize the start menu with your favorite apps.
To personalize the start menu, do the following:
1Open the start menu, and then select  All apps  to  display the apps list.
2Right click the app you want to add to the start menu, and then select  Pin to Start.
Note:You can also drag apps from the  Most used or All apps  columns to add them to the start menu. 
						

							12
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or shutting it down  
- - - - - - - - - - - - - - - - - - - - 
When you have finished working with your comput er, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the 
startup pr ocess.
T

o put the computer to sleep, do one of the following:
 Close the display lid.
 Press the Power button.
 Open the start menu, and then select  Power 
  S leep.
Note: Wait until the power indicator light starts blinking  (indicating that the computer is in sleep mode) 
before you move your computer. Moving your comput er while the hard disk is spinning can damage 
the hard disk, causing loss of data.
To

 wake the computer, do one of the following:
 Press any key on the keyboard.
 Press the Power button. 
						

							Chapter 2. Starting to use Windows 10
13

Shutting down the computer
If you are not going to us e your computer for a long time, shut it down.
To shut down the computer, do one of the following:
 Open the start menu, and then select  Power

   Shut down .


Right-click the  Start  button
  in the lower-left corner and select  Shut down or sign out  
Sh ut down . 
						

							14
Chapter 2. Starting to use Windows 10
Task and desktop management  
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - 
Task view
To open the task view, do one of the following:
 Select the Task view button 
 on the task b

ar.
 Press the Windows key 
 +  Tab.
 Virtual desktop management
Windows 10 supports the ability to create, manage and switch between virtual desktops. 
To create a new virtual desktop, do one of the following:
 Open the task view, and then select  New desktop.
 Press the Windows key 
 +  Ctrl  + D.
To

 switch between different desktops, do one of the following:
 Open the task view and select the desktop you want active.
 Press the Windows key 
 + Ctrl +  /  to scroll thr

ough the desktops you’ve created. 
						

							Chapter 2. Starting to use Windows 10
15
Connecting to a wireless network  
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Enabling wireless connection
To enable wireless functions, do the following:
1Press  F7 (  ) to disa ble airplane mode.
2Click  on the lower-right corner of the task bar to open the network configuration page.
Connecting to a wireless network
After wireless has been enabled, the computer  will automatically scan for available wireless 
networks and display them in the wireless network  list. To connect to a wireless network, click 
the network name in the list, and then click  Connect.
Note:Some networks require a network security key or passphrase for connection. To connect to one of 
those networks, ask the network administrator or the  Internet service provider (ISP) for the security 
key or passphrase.
Get Started app   
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Windows 10 also provides the  Get Started app to explain the new features of Windows 10. You 
can find it on the start menu.
To open the Get Started app, do one of the following:
 Open the start menu and select  Get Star
 ted  .

Pre
 ss Fn
 + F1 (depending on your keyboar d layout). 
						

							16
Chapter 3. Recovery system
Introduction
Push-button reset  is a built-in recovery tool that enable s users to restore their operating system 
to its original state. This preserves their data  and important customizations, without the need to 
back up their data in advance.
The following P ush

-button reset features are available to users from multiple locations within 
Wi n d o w s :
Refreshing the computer
Fixes software problems by reinstalling the factory default configuration. This preserves the 
user ’s data, important settings, and any Window s Store apps previously purchased from the 
Windows Store.
Resetting the computer
Prepares the computer for recycling or transfer of  ownership. This reinstalls the factory default 
configuration and returns all user data and applicat ions to the state of their original Out-of-Box 
Experience (OOBE).
 Using Push-button reset
Push-button reset  can be launched using on e of the following methods:
 Novo button:
- Shut down the computer and wait at least fi ve s
 econds. Press the Novo button and then 
select  System Recovery .
 - Se ttings  
 Update & security   Recovery   Advanced startup   sel ect Restart now.
Fo
r more instructions, see the Windows Help and Support file on your computer.
When I purchased my computer, it included a copy of Windows. How can I determine whether the 
c o

py of Windows is preinstalled by Lenovo?
On the outside of the sales package of your  computer, 

you should find a label containing 
configuration information for your comput er. Check the printed string next to OS. If it contains 
Windows  or WIN , the copy of Windows was preinstalled by Lenovo.
What is the Recovery Partition? If your computer is preinstalled with any version of Windows 10, the storage device of your 
comp

uter contains a Recovery Partition. This partition contains the image file of the preinstalled 
Windows operating system. In cases of system failure, you can use the Lenovo OneKey Recovery 
system or the Windows Reset feature to restore the operating system to its factory status.
Note: The Recovery Partition is not assigned a drive letter and cannot be accessed through Windows File 
Explorer.