Lenovo Ideapad 100s 11iby User Guide

							Lenovo ideapad 100S
Read the safety notices and important tips in the 
included manuals before using your computer.
User Guide 
ideapad 100S-11IBY 
						

							First Edition (August 2015)
© Copyright Lenovo 2015. 
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered p\
ursuant to a General 
Services Administration “GSA” contract, use, reproduction, or disc\
losure is subject to restrictions set 
forth in Contract No. GS-35F-05925.
For details, refer to Guides & Manuals at http://support.lenovo.com.
Regulatory Notice
Before using the product, be sure to read Lenovo Safety and General Information Guide first.
The features described in this guide are common to most models. Some fea\
tures may not 
be available on your computer or your computer may include features that\
 are not 
described in this user guide. Some instructions in this guide may assume that you are using Windows
® 10. If you are 
using other Windows operating system, some operations may be slightly di\
fferent. 
If you are using other operating systems, some operations may not apply \
to you.
Notes
•
•
•
The illustrations in this manual may differ from the actual product. Ple\
ase refer to the 
actual product.
•
• -     To view compliance information go to: http://www.lenovo.com/compli\
ance
-     
To download environmental information go to: http://www.lenovo.com/ecode\
claration
The latest electronic compliance and environmental information are avail\
able from the 
Lenovo compliance information Web sites.
• 
						

							i
Contents
Chapter 1. Getting to know your computer.....................................................................................  1
Top view
 .........................................................................................................................................................  1
Left-side view
 ................................................................................................................................................  5
Right-side view ..............................................................................................................................................  6
Bottom view
 ...................................................................................................................................................  7
Chapter 2. Starting to use Windows 10 ........................................................................................... 8
Configuring the operating system for the first time
 ................................................................................  8
Operating system interface ..........................................................................................................................  8
Putting the computer to sleep or shutting it down
 ................................................................................  10
Task and desktop management
 ................................................................................................................  12
Connecting to a wireless network ............................................................................................................  13
Get Started app
 ............................................................................................................................................  13
Chapter 3. Recovery system ..........................................................................................................  14
Chapter 4. Troubleshooting............................................................................................................  16
Frequently asked questions
 .......................................................................................................................  16
Troubleshooting ..........................................................................................................................................  18
Trademarks ......................................................................................................................................  22 
						

							1
Chapter 1. Getting to know your computer
Top view   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Attention: 
•When closing the display panel, be careful not to leave pens or any other objects in between the display 
panel and the keyboard. Otherwise, the display panel may be damaged.
Note:The dashed areas indicate parts that are not visible externally.
12233
4
5
7
8
6 
						

							2
Chapter 1. Getting to know your computer
aIntegrated cameraUse the camera for video communication or taking photos.
bBuilt-in microphone 
(with noise reduction)Captures sound which can be used for video conferencing, voice 
narration, or audio recording.
cWireless LAN antennasConnect to a wireless LAN adapter to send and receive wireless 
radio signals.
dComputer displayProvides brilliant visual output.
ePower buttonPress this button to turn on the computer.
fSystem status indicators
SymbolIndicatorIndicator 
statusMeaning
PowerOn 
(solid white)The computer is powered on.
Off•The computer is in sleep mode.
•The computer is powered off.
BatteryOn 
(solid white)The battery has between 20% and 100% charge.
On 
(solid amber)The battery has less than 20% charge.
Off The battery is fully charged.
gNovo buttonWhen the computer is off, press this button to start the recovery system 
or the BIOS setup utility, or to enter the boot menu.
Note:For details, see “Recovery system” on page 14.
hTouchpadThe touchpad functions as a conventional mouse.
Touchpad: To move the pointer on the screen, slide your fingertip over 
the pad in the direction in which you want the pointer to move.
Touchpad buttons: The functions of the left/right side correspond to 
that of the left/right mouse button on a conventional mouse.
Note:You can enable/disable the touchpad by pressing   . 
						

							Chapter 1. Getting to know your computer
3

Using the keyboard
Function key combinations
Through the use of the function keys, you can change operational features instantly. To use this 
function, press and hold  Fn  ; then press one of the function keys  .
The following describes the features of each function key.
Fn + PgUp:Activates the home key function.
Fn + PgDn: Activates the end key function.
ab
21 
						

							4
Chapter 1. Getting to know your computer
Hotkeys
You can access certain system settings quickly by pressing the appropriate hotkeys.
Setting hotkey mode
By default, the hotkey functions are accessible by pressing the appropriate hotkey. 
However, you can disable the hotkey mode in the BIOS setup utility.
To disable the hotkey mode:
1Shut down the computer.
2Press the Novo button and then select  BIOS Setup.
3In the BIOS setup utility, open the  Configuration menu, and change the setting of  HotKey 
Mode  from Enabled  to Disabled .
4Open the  Exit menu, and select  Exit Saving Changes .
:Mutes/unmutes the sound.:Enables/disables Airplane mode.
: Decreases the volume level. :Displays all currently active apps.
:Increases the volume level.:Turns on/off the backlight of the 
LCD screen.
: Closes the currently active 
window. :Toggles the display between the 
computer and an external device.
:Refreshes the desktop or the 
currently active window.:Decreases the display brightness.
: Enables/disables the touchpad. : Increases the display brightness.
Note: When hotkey mode is disabled, press the  Fn key and the appropriate hotkey to access the 
corresponding hotkey function. 
						

							Chapter 1. Getting to know your computer
5
Left-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Using a micro SD card (not supplied)
Your computer supports micro Secure Digital (SD) cards.
Inserting a card
Slide the card in until it clicks into place.
Removing a card
1Push the card in until you hear a click.
2Gently pull the memory card out of the slot.
aAC power adapter jackConnects to the AC power adapter.
bHDMI portConnects to devices with HDMI input such as a TV or an external display.
cCombo audio jackConnects to headsets.
Notes:
•The combo audio jack does not support conventional microphones.
•The recording function might not be supported if third-party headphones or headsets are connected, 
due to different industry standards.
dMicro SD card slotAccepts a micro SD card (not supplied).
Note:For details, see “Using a micro SD card (not supplied)” on page 5.
Notes:
•Insert only one card into the slot at a time.
•This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Note:Before removing the memory card, disable it by using the Windows safely remove hardware and eject 
media utility to avoid data corruption.
1342 
						

							6
Chapter 1. Getting to know your computer
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Connecting USB device
Your computer comes with two USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your computer, Windows 
automatically installs a driver for that device. After the driver has been installed, you can 
disconnect and reconnect the device without performing any additional steps.
Before disconnecting a USB storage device, make sure your computer has finished transferring 
data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows 
notification area to remove the device before disconnecting.
aUSB portsConnect to USB devices.
Note:For details, see “Connecting USB device” on page 6.
Note:Typically, Windows detects a new device after it has been connected, and then installs the driver 
automatically. However, some devices may require you to install the driver before connecting. Check 
the documentation provided by the device’s manufacturer before connecting the device.
Note:If your USB device uses a power cord, connect the device to a power source before connecting it. 
Otherwise, the device may not be recognized.
1