Home > Lenovo > Notebook > Lenovo Flex 2 Instruction Manual

Lenovo Flex 2 Instruction Manual

Here you can view all the pages of manual Lenovo Flex 2 Instruction Manual. The Lenovo manuals for Notebook are available online for free. You can easily download all the documents as PDF.

Page 51

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D
47
Figure 8. Removal steps of fan assembly and heat sink assembly (continued)
Unplug the fan connector in the direction shown by arrow  .
When installing: Make sure that the fan connector is attached firmly to the 
system board.
Lift the fan assembly in the direction shown by arrow  . Be careful not to 
damage the connector.
Flex 2-14/Flex 2-14D:
b
b
c
c 

Page 52

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D Hardware Main-
tenance Manual
48
Flex 2-15/Flex 2-15D:
c 

Page 53

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D
49 1090 System board
For access, remove these FRUs in order:
 “1010 Keyboard” on page 34
 “1020 Optical drive” on page 36
 “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot 
compartment cover” on page 37
 “1040 Battery pack” on page 39
 “1050 Hard disk drive” on page 40
 “1060 DIMM” on page 42
 “1070 PCI Express Mini Card for wireless LAN/WAN” on page 43
 “1080 Fan assembly and Heat Sink assembly” on page 45Important notices for handling the...

Page 54

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D Hardware Main-
tenance Manual
50
Figure 9. Removal steps of system board (continued)
Flex 2-15/Flex 2-15D: Remove five screws  .
Flex 2-14/Flex 2-14 D: Remove two screws   and five screws  .
StepScrew (quantity)ColorTorque
M2 × 3 mm, flat-head, nylok-coated (2) 
(Flex 2-14/Flex 2-14D)
M2 × 4 mm, flat-head, nylok-coated (5) 
(Flex 2-14/Flex 2-14D)
M2.0 × 3.5 mm, flat-head, nylok-coated (5) 
(Flex 2-15/Flex 2-15D)Black
Silver
Black1.5~1.8 kgfcm
1.8~2.0...

Page 55

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D
51
Figure 9. Removal steps of system board (continued)
Flex 2-15/Flex 2-15D: Unplug DC-IN cable connector in the direction shown by 
arrow  , speakers connector in the direction shown by arrow  , detach ODD 
transfer board connector in the direction shown by arrow  , touch pad 
connector in the direction shown by arrow  , disconnect LCD connector in the 
direction shown by arrow  .
Flex 2-14/Flex 2-14 D: Unplug DC-IN cable connector in the direction shown...

Page 56

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D Hardware Main-
tenance Manual
52
Remove the system board in the direction shown by arrow  .
When installing: When attaching the system board to the base cover, adjust the 
placement of the USB, RJ-45, HDMI ports as shown in  , and make sure 
that they are attached to the holes on the base cover as shown. Improper 
placement of those jacks might cause a damage.h
h
abc 

Page 57

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D
53 1100 LCD unit
For access, remove these FRUs in order
 “1010 Keyboard” on page 34
 “1020 Optical drive” on page 36
 “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot 
compartment cover” on page 37
 “1040 Battery pack” on page 39
 “1050 Hard disk drive” on page 40
 “1060 DIMM” on page 42
 “1070 PCI Express Mini Card for wireless LAN/WAN” on page 43
 “1080 Fan assembly and Heat Sink assembly” on page 45
 “1090 System board” on page 49
Figure 10....

Page 58

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D Hardware Main-
tenance Manual
54
Flex 2-14/Flex 2-14 D:
When installing:
 Route the antenna cables along the cable guides. As you route the cables, 
make sure that they are not subjected to any tension. Tension could cause the 
cables to be damaged by the cable guides, or a wire to be broken.
 Make sure that the LCD connector is attached firmly and make sure that you 
do not pinch the antenna cables when you attach the LCD assembly. Route 
the LCD cable...

Page 59

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D
55
Figure 10. Removal steps of LCD unit (continued)
Detach the LCD unit from the upper case. 

Page 60

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D Hardware Main-
tenance Manual
561110 Speakers, base cover, IO board, DC-IN, power board and 
ODD transfer board
For access, remove these FRUs in order:
 “1010 Keyboard” on page 34
 “1020 Optical drive” on page 36
 “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot 
compartment cover” on page 37
 “1040 Battery pack” on page 39
 “1050 Hard disk drive” on page 40
 “1060 DIMM” on page 42
 “1070 PCI Express Mini Card for wireless LAN/WAN” on page 43...
Start reading Lenovo Flex 2 Instruction Manual

Related Manuals for Lenovo Flex 2 Instruction Manual

All Lenovo manuals