Lenovo A7600h Service Manual

							Lenovo A7600
37 1040 LCM FPC
For access, remove the following FRUs in order:
• “1010 Rear cover and side keys” on page 28
• “1020 Battery pack” on page 33
• “1030 Battery holder ” on page 35
1.Peel off the mylar on the LCM FPC connector on the main board.
Figure 4-1. Peeling off the mylar
2.Unlock the above-mentioned LCM FPC connector using a guitar pick or a 
thin flat blade.
Figure 4-2. Unlocking the LCM FPC connector (on the main board) 
						

							Lenovo A7600 Hardware Maintenance Manual
38
3.Pull out the LCM FPC from the unlocked connector using a pair of tweezers.
Figure 4-3. Pulling out the LCM FPC
4.Peel off the mylar on the LCM FPC connector on the front module.
Figure 4-4. Peeling off the mylar 
						

							Lenovo A7600
39
5.Unlock the LCM FPC connector mentioned in Step 4 using a guitar pick or a 
thin flat blade.
Figure 4-5. Unlocking the LCM FPC connector (on the front module) 
						

							Lenovo A7600 Hardware Maintenance Manual
40
6.Pull out the LCM FPC from the unlocked connector using a pair of tweezers.
Figure 4-6. Pulling out the LCM FPC
The LCM FPC is now removed. 
						

							Lenovo A7600
41 1050 Rear camera
For access, remove the following FRUs in order:
• “1010 Rear cover and side keys” on page 28
• “1020 Battery pack” on page 33
1.Detach the FPC of the rear camera from its connector on the main board using 
a thin flat blade or guitar pick.
Figure 5-1. Detaching the FPC of the rear camera 
						

							Lenovo A7600 Hardware Maintenance Manual
42
2.Remove the rear camera from the tablet.
Figure 5-2. Removing the rear camera 
						

							Lenovo A7600
43 1060 Antenna and CAP sensor FPC assembly
For access, remove the following FRUs in order:
• “1010 Rear cover and side keys” on page 28
• “1020 Battery pack” on page 33
1.Peel off the mylar on the CAP sensor FPC connector that is located on the 
main board.
Figure 6-1. Peeling off the mylar on the CAP sensor FPC connector
2.Unlock the CAP sensor FPC connector using a guitar pick.
Figure 6-2. Unlocking the CAP sensor FPC connector 
						

							Lenovo A7600 Hardware Maintenance Manual
44
3.Pull out the CAP sensor FPC from its connector using a pair of tweezers.
Figure 6-3. Pulling out the CAP sensor FPC
4.Remove screw   under the disconnected end of the CAP sensor FPC.
Figure 6-4. The screw under the CAP sensor FPC
Part No.Screw (quantity)ColorTorque
Phillips flat head screw (1) Silver N/A
a
a 
						

							Lenovo A7600
45
5.Peel off the other end of the CAP sensor FPC from the antenna box.
Figure 6-5. Peeling off the other end of the CAP sensor FPC
6. Remove screw   under the peeled-off end of the CAP sensor FPC.
Figure 6-6. The screw under the CAP sensor FPC
Part No.Screw (quantity)ColorTorque
Phillips flat head screw (1) Silver N/A
a
a 
						

							Lenovo A7600 Hardware Maintenance Manual
46
7.Detach the RF cable from its connector on the main board using a guitar pick.
Figure 6-7. Detaching the RF cable
8.Take out the RF cable from the cable duct in the front module of the tablet.
Figure 6-8. Taking out the RF cable from the cable duct