Lawn Tractor 8211 0276 02 Stiga Park Pro20 Pro16 Royal President Senator Operators Manual

STIGA PARK
PRO 20
PRO 16
ROYAL
PRESIDENT
SENATOR
8211-0276-02 

PARK
1920
2
346
5
1
16
1.2.
3. 

PARK
11
9 10
7
11
9 8 14
7
15
13
714
8
9
12
16 15
71411
9
13
1411
8
9
16
15 7
13
7
14
8
9
12
16
15
18
17
4. Senator 5. President
6. Royal 7. Pro 16
8. Pro 189. Pro 20 

PARK
12
OPEN
21
10.
12.
14. Royal
16.11 .
13. Senator - President
15.Pro16-Pro18-Pro20
17. Royal 

PARK
0.75 mm
18. Pro 16 - Pro 18 - Pro 2019. Senator - President
20. Royal
21.Pro16-Pro18-Pro20
22. Pro 18 - Pro 2023.
24. Senator - President
25.Royal-Pro16-Pro18-Pro20 

PARK
MAX
26.
27.
28.29a. President - Royal
29b. Pro 16 - Pro 18 - Pro 20 

8
ENGLISHGB
GENERAL
This symbol indicates WARNING. Per-
sonal injury and/or damage to property
may result if the instructions are not
followed carefully.
You must read these instructions for use
and the accompanying pamphlet
“SAFETY INSTRUCTIONS” careful-
ly, before starting up the machine.
SYMBOLS
The following symbols are displayed on the ma-
chine in order to remind you about the safety pre-
cautions and attention necessary when using the
machine.
The symbols mean:
Wa r n i n g !
Read the instruction...

9
ENGLISHGB
tem. There are 3 positions:
1. Pedal released – service brake
not activated.
2. Pedal depressed halfway –
forward drive disengaged. Serv-
ice brake not activated.
3. Pedal fully depressed – for-
ward drive disengaged. Service
brake fully activated.
4. PARKING BRAKE
An inhibitor that can lock the brake pedal in the de-
pressed position.
Depress the brake pedal fully. Move the
inhibitor to the right and then release the
brake pedal.
The parking brake is released by pressing the brake
pedal. The...

10
ENGLISHGB
tion to operating position 2, the spotlight is acti-
vated. This uses up battery power. Do not leave
the machine with the key in position 2 (applies
to Pro16-Pro18-Pro20).
10. GEAR LEVER (Senator)
A lever for selecting one of the five forward gears
in the gearbox (1-2-3-4-5), neutral (N) or reverse
(R).
The clutch pedal must be kept pressed in when
changing gear.
NOTE! You must make sure the machine is quite
stationary before changing from reverse to forward
gear or vice versa. If a gear...

11
ENGLISHGB
justment of a rear rake (available as an accessory).
Theswitchisusedtoraiseandlowerthe
rear rake.
Connection cables for the rake are located to the
rear of the machine, to the left on the top of the
bumper (Pro16 and Pro18 are prepared for a rear
rake).
18. SAND SPREADER (Pro20)
The machine has been designed for electrical ad-
justment of a sand spreader (available as an acces-
sory).
Theswitchisusedtostartandstopthe
spreader.
A connection contact for the sand spreader is locat-
ed to the...