Lawn Mower Stiga Park PA407 Instruction Manual
Here you can view all the pages of manual Lawn Mower Stiga Park PA407 Instruction Manual. The Stiga manuals for Lawn Mower are available online for free. You can easily download all the documents as PDF.
Page 1
TRANÅS - SWEDEN Art. No: 13-1948-12 Instruktion Käyttöohjeet Instruksjon Bedienungsanleitung Instructions SNÖSLUNGA LUMILINKO SNØFRESER SCHNEESCHLEUDER SNOW THROWER STIGA PARK MADE IN FINLAND BY KOVA 10127 1319-1745-02 Type: PA407
Page 2
SAFETY PRECAUTIONS 1.Read the owners instruction manual carefully. 2.Be thoroughly familiar with the controls and proper use of the equipment. Know how to stop the unit and disengage the controls quickly. 3.Never allow children to operate equipment. Never allow adults to operate equipment without proper instruction. 4.Keep the area of operation clear of all persons, especially small children and pets. 5.Exercise caution to avoid slipping or falling, especially when operating in reverse. 6.Thoroughly...
Page 3
9.Never attempt to make any adjustment while engine is running. 10.Never operate the snow thrower without good visibility or light. 11.After striking foreign object, stop the engine, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower. 12.If the unit should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble. 13.Take all possible precaution when leaving the...
Page 4
26 ENGLISHSAFETY LABELS WARNING Read opera tors manual. Keep sa fety devices (guards, shields and switches ) in place when w orking. If wheel weigh ts are regues ted read opera tors manual. Do no t blow sno w w hen children or others are around. Remove objec ts tha t could be thro wn by the sno wblo wer 10300 10301
Page 5
27DANGERAvoid injury from rotating auger. Keep hands, feets and clothing awayDANGER Shut off engine before unclogging discharge chut.ENGLISH SAFETY LABELS10302 10303
Page 6
1.Remove the cutterhead from the machine. 2.Fit the deflector pipe. 3.Drive the machine up to the thrower and bolt the thrower to the attachment bracket. 4.Fit the snow throwers lift arm to the attachment lift. 5.Fit the deflector pipes turning lever on the thrower. 6.Fit the V-belt from the machine onto the thrower. DO NOT LOOSEN AND REMOVE THE THROWERS TENSION ROLLER OR BRACKET. The tension roller is set at the factory. 7.Adjust the throwers runners according to the ground and application. 8.Check that...
Page 7
MAINTENANCE ALWAYS STOP THE ENGINE before carry out maintenance or repairs. 29 Fitting the V-belt Adjusting the V-belt tension Do not rotate the auger in this direction, the belt might jump off! Park >2000Park 2000>
Page 8
Lubricate and tension (if necessary) the chain in the chain housing after every 5 hours of use. The tension is correct when the chain can be depressed 5 mm in its centre. Irregular vibrations on the thrower are a sign that something is wrong. STOP THE ENGINE immediately and check the thrower, make any repairs before continuing. STORAGE Before storing for the summer any damaged areas should be prepared and painted. Thereafter apply a film of thin oil or grease on the thrower to prevent rusting. TECHNICAL...
Page 10
Ismo Forsström INTYGS Tillverkare: KONEPAJA A. VANNE, KOVA, Veistämöntie 16, FIN-24800 HALIKKO, FINLAND, försäkrar härmed att maskintyp PA407 är i överenstämmelse med maskindirektivet 89/392/EEC, 91/368/EEC, 93/44/EEC med särskilda hänvisningar till direktivets Annex 1 om väsentliga hälso och säkerhetskrav i samband med konstruktion och tillverkning. Utfärdat i Halikko 2000 TODISTUSFIN Valmistaja: KONEPAJA A. VANNE, KOVA, Veistämöntie 16, FIN-24800 HALIKKO, FINLAND, vakuuttaa, että konetyyppi PA407 on...