Lawn Mower 8211 3011 06 Stiga Park 121m Operators Manual
Here you can view all the pages of manual Lawn Mower 8211 3011 06 Stiga Park 121m Operators Manual . The Stiga manuals for Lawn Mower are available online for free. You can easily download all the documents as PDF.
Page 1
8211-3011-06 STIGA PARK 121M
Page 2
D E H F G I I 1. Park -1993 2. Park -1993 3. Park -1993 4. Park -19935. 6a. Park -1999 7. 8. 6b. Park 2000-
Page 3
J Z X Y V W Denna produkt, eller delar därav, omfattas av följande mönsterskydd: This product, or part of it, is covered by the following design registration: Sverige/Sweden 62 435 Tyskland/Germany M97 07 997.9 (pending) 9. 13. 14. 10. 11. 15. 12.
Page 4
Y W V X Z 17.
Page 5
ENGLISHGB SYMBOLS The following symbols are displayed on the ma- chine in order to remind you about the safety pre- cautions and attention necessary when using the machine. The symbols mean: Wa r n i n g ! Read the instruction book and safety man- ual before using the machine. Wa r n i n g ! Do not put hands or feet under the cover of the machine when it is running. Wa r n i n g ! Beware of objects being flung out. Keep spectators away. Wa r n i n g ! Before starting any repair work, remove the spark...
Page 6
ENGLISHGB height positions - art. no. 13-2921 hassteplessadjustment of the mowing height. N.B. The stated mowing heights apply when the machine is standing on firm ground. MOWING HINTS For the best Multiclip effect follow this advice: - mow regularly. - use full throttle on the engine. - keep the underside of the mower deck clean. - use sharp blades. - do not mow wet grass. - mow twice (using different mowing heights) if the grass is long. MAINTENANCE PREPARATIONS Unless otherwise stated, all service and...
Page 7
ENGLISHGB Always use original spare parts. Using non-original spare parts can result in the risk of damage even if they fit in the machine. The cutting system consists of three blade bars, each with two interchangeable blade tips Y (fig 15). Both blade tips should be replaced at the same time to avoid any imbalance. Fit the new blade tips. Tighten the screws V and W fully. Tightening torque: V - 9.8 Nm, W - 24 Nm. And heavy impact can result in the blade tip being folded aside. Loosen the locking nut X...