Land Rover Security System App Diagnostics Manual

							4.2 
SPECIAL FUNCTIONS 
PROGRAMMING REMOTE PLIP KEYS (27VT) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
READING EKA CODE
 
 
 
Select PROGRAM PLIP and press en-
ter button. 
 
 
 
 
 
Press the unlock button on the PLIP 
key quickly up to 8 times, or until horn 
sounds. 
 
 
 
 
 
 
If key has been programmed success-
fully the screen opposite should display 
how many PLIP keys have been pro-
grammed. Repeat for up to 4 Plip keys 
by pressing ENTER or BACK to exit. 
 
 
 
 
 
 
 
Select READ EKA CODE from menu 
and press ENTER 
 
 
 
 
 
 
EKA should be displayed.  
 
NOTE : The turn numbers can go as 
high as 15. 
 PROGRAM PLIP 
 READ EKA CODE 
     DIAGNOSTIC MENU 
 PROGRAM PLIP 
 
     PRESS PLIP UNLOCK 
       AT LEAST 8 TIMES 
     UNTIL HORN SOUNDS 
      OR LIGHTS FLASH 
   KEYS PROGRAMMED : 1 
    PRESS BACK TO EXIT 
ENTER—PROG MORE KEYS 
 PROGRAM PLIP 
  READ EKA CODE 
     DIAGNOSTIC MENU 
  READ EKA CODE 
  UNLOCK 6 TURNS 
  LOCK    1 TURNS 
  UNLOCK 11 TURNS 
  LOCK    11 TURNS 
       PRESS ENTER KEY  
						

							4.3 
SPECIAL FUNCTIONS 
PROGRAMMING REMOTE PLIP KEYS (10AS) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 FREELANDER 
 DISCOVERY 
 RANGE ROVER CLASSIC 
 DEFENDER 
 
VEHICLE SELECTION MENU 
        PRESS ENTER KEY 
 
         TURN IGNITION ON 
 
        PRESS ENTER KEY 
 
 
At the VEHICLE SELECTION menu 
select the required vehicle. 
 
Then press the ENTER key. 
 
 
 
 
 
 
 
Turn Ignition ON and press the ENTER 
key. 
 
 
 
 
 
 
The AD100 will now attempt to commu-
nicate with the ECU. 
 
 
 
 
 
 
If communication is successful the sys-
tem information will be displayed as 
shown. 
 
 
 
 
 
 
 
 
Select SPECIAL FUNCTIONS. 
 
      PLEASE WAIT 
TRYING TO COMMUNICATE 
LUCAS 10AS 
     ECU IDENTIFICATION 
       PRESS ENTER KEY 
 ECU IDENTIFICATION 
 SPECIAL FUNCTIONS 
     DIAGNOSTIC MENU  
						

							4.4 
SPECIAL FUNCTIONS 
PROGRAMMING REMOTE PLIP KEYS (10AS) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NOTE : Exit from MENU and disconnect AD100 before testing PLIP 
keys. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Select PROGRAM PLIP and press en-
ter button. 
 
 
 
 
 
Press the unlock button on the PLIP 
key quickly up to 8 times, or until alarm/
horn sounds or lights flash. 
 
Repeat for up to 4 Plip keys by press-
ing ENTER or BACK to exit. 
 
 
 
As a reminder, if the Plip keys are not 
synchronised, then please synchronise 
all keys as previously explained. 
 
 
 PROGRAM PLIP 
 READ EKA CODE 
     DIAGNOSTIC MENU 
 PROGRAM PLIP 
 
     PRESS PLIP UNLOCK 
       AT LEAST 8 TIMES 
     UNTIL HORN SOUNDS 
      OR LIGHTS FLASH 
 
    TO RE-SYNCHRONISE 
PLIPS PRESS THE UNLOCK   
  BUTTON 4 TIMES