Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover In Car Entertainment 3rd Edition Rover Manual
Land Rover Range Rover In Car Entertainment 3rd Edition Rover Manual
Here you can view all the pages of manual Land Rover Range Rover In Car Entertainment 3rd Edition Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 11
Radio Tuning 9 RADIO TUNING If you know the frequency of the radio station you are seeking, or you need to select a radio station that is too weak to be found by automatic tuning, use manual tuning, as follows: Select the desired waveband (FM or AM), then press the’MAN’button (6). By briefly pressing either tuning button (5), the frequency changes (either up or down) in steps of 0.1 MHz for FM, or 1 kHz for MW and LW. Fast manual tuning By keeping either manual tuning button depressed, the waveband is...
Page 12
Radio Pre-set Buttons 10 743ICE0104 RADIO PRE-SET BUTTONS The six pre-set buttons (7) can be used to manually store up to twelve FM stations (six each on FM1 and FM2), twelve MW stations (six each on MW1 and MW2), and six LW stations. The pre-sets are programmed as follows: Programming the pre-sets Select the required waveband (FM1, FM2, MW1, MW2 or LW). Tune to the desired frequency using either automatic or manual tuning. Press and hold one of the pre-set buttons until a bleep sounds. The frequency...
Page 13
Auto-store 11 743ICE0104 AUTO-STORE Auto-store enables you to rapidly tune and store the strongest FM and MW radio signals in a single operation. This facility is particularly useful if you are in an unfamiliar area and have little knowledge of local transmitter frequencies. Programming auto-store Press and hold the appropriate waveband selection button (3 or 4) until a bleep sounds (the radio mutes and the display shows either’FM AUTOSTORE’or’MW AUTOSTORE’). Auto-store scans the waveband to find the six...
Page 14
Radio Data System 12 RADIO DATA SYSTEM (RDS) This radio is equipped with RDS (Radio Data System). RDS is being introduced in European countries and operates on the FM waveband. The system enables the radio to receive other information in addition to radio signals, including: the programme service name(this enables the set to display the radio station name instead of the frequency). alternative frequenciesfor the FM radio station being received (this enables the set to automatically select the...
Page 15
Traffic Information 13 9ICE0105 TRAFFIC INFORMATION On the FM waveband, your radio is able to broadcast traffic information from local radio stations that are linked to the same network as the station to which it is tuned. Selecting traffic BRIEFLY press the Traffic button (9) - the TRAFFIC indicator illuminates in the display. Any available traffic information then broadcasts automatically as and when it occurs (even if you are listening to cassette tapes or CDs). During traffic announcements the...
Page 16
News Information 14 9ICE0105 NEWS INFORMATION On the FM waveband, RDS radio stations can network together to provide news information broadcasts. Your radio is able to identify these stations and can broadcast news bulletins as and when they occur by interrupting the current radio broadcast, tape or CD. Switching on news Press and hold the News button (9) until a bleep sounds - the NEWS indicator illuminates in the display. All available news bulletins are then received automatically as and when they...
Page 17
Digital Sound Processing 15 DIGITAL SOUND PROCESSING (DSP) (if fitted) To improve overall sound quality and the ability of the audio system to negate the effects of adverse road and travelling conditions on audio reception, some vehicles are fitted with DSP. In addition, DSP provides’intelligent’interaction with other vehicle equipment, such as the navigation system and telephone. Audio quality Driver adjustable features Press the audio selection button 6 times to access the DPS menu. Rotate the volume...
Page 18
Radio Reception 16 Distortion, interference and lack of signal clarity, are often attributed to a fault in the radio - this is rarely the case. Problems of this kind are usually caused by phenomena such as atmospheric conditions, signal strength, hilly terrain, tall buildings, bridges and even electrical interference from power lines. Please remember:A car radio receives signals while the vehicle is in motion (unlike a domestic set) - constantly changing direction and moving away from, or nearer to, the...
Page 19
Care of Cassette Player and Tapes 17 ICE 0054 Use only good quality tapes with a maximum capacity of ninety minutes (C90). Check that both spools rotate freely and remove any loose turns at the start of the tape by winding one spool with a pen or pencil. Cassette player In use, the tape head accumulates dust and contamination, gradually impairing sound reproduction and, in extreme cases, reducing volume too. To combat contamination, clean the tape head periodically (after approximately every 20 hours...
Page 20
CD changer unit 18 ICE0096231 COMPACT DISC CHANGER UNIT (if fitted) The CD autochanger is located in the rear loadspace as shown below. Removing/inserting the magazine Fully open the sliding cover (1) to insert or remove the magazine. Keep the cover closed at all other times to prevent dust and dirt from entering the changer unit. Press the button (2) to eject the magazine. Insert the magazine (3) in the direction of the arrow marked on the magazine casing and push it fully into the changer. Finally,...