Land Rover Range Rover Carin Navigation System 1999 Rover Manual

							CARiN Navigation System
6
NOTE: If the navigation system is switched
off in stand-by mode it restarts in stand-by
mode when the ignition is switched on again.
To activate the system, press the rotary
switch.
The navigation system menus are based on
the following screen layout:
Menu screen
1.
 Information window
2.
 Menu title
3.
 Country code of the inserted CD map
4.
 Destination address - (See Destination
Input, page 7).
5.
 Input window
6.
 Menu options - Highlighted options can
be selected.
NOTE: Options, which are currently not
available, are skipped automatically.
7. Status line - The following information
is displayed to the left or right of the
status line:
Clock
Date
Estimated time of arrival (for
example “
•9:28”)
Remaining travel time (for example
“
È•0:46h”)
Further information that is always displayed
by the system are as follows:
Hour glass (system is calculating:
for example during route planning)
Audible information (Voice
messages) disabled:
Route planning criterion.
8.
 Cursor - Move the cursor with the
rotary switch and press to accept
selection.
NOTE: For further information on
configuration of the status line, see System
Settings, page 23.
MENU SCREEN 
						

							CARiN Navigation System
7
MENU OPTIONS
Main menu
NOTE: Move the cursor (highlighted field)
with the rotary switch
 and press to accept
selection.
NOTE: The cursor automatically skips
options which are not available (for example,
if you did not specify a destination address).
You can select the following menu options in
the Main Menu.
Destination input - This option enters the
Destination Input menu. Select this option to
enter the city, road, junction or the special
facility of the destination you want to travel
to. (See page 8).
Map - This option offers you a map with
the area around the current car position.
Settings - This option enters the System
Settings menu. Select this option to set your
own preferences. (See page 23)Guidance - This option enters the guidance
screen and activates the guidance function
(only if a destination address is entered. (See
page 15).
Emergency - This option enters the
Emergency menu to show you the current
car position and the country-specific
emergency phone number (See page 17).
Stand-by - This option switches off the
display screen and the acoustic guidance
advice. The navigation functions of the
system remain switched on.
Press the rotary switch to return to normal
operation.
NOTE: By selecting MENU on the display
and pressing the rotary switch you can
directly call up the Main Menu from any other
menu.
MAIN MENU 
						

							CARiN Navigation System
8
DESTINATION INPUT
Destination input menu
Select 
Destination input from the Main
Menu and the relevant menu is presented.
You can then enter the destination address
in three different ways:
1.
 Letter-by-letter using a typewriter;
2.
 A list of data entries from the systems
database (on the CD-ROM);
3.
 Input using a map and crosshairs.
The following options are available:
City: To enter the country and city name of
the destination address.
NOTE: Only if more than one country is
available on the CD-ROM. The country code
of the selected country or the country
available on the CD is shown in the upper left
corner of the screen.
Road - To enter the road name (optional).Junction - To enter a junction for more
precise distinction selection (optional).
Delete destination - To delete the last
entered destination address.
Guidance - To go to the 
Guidance menu
and to activate guidance.
NOTE: To select the Guidance option you
first have to enter at least a city name as
destination address.
Info on dest. - To get a list of facilities
(special locations) related to the entered
destination stored in the database (e.g.
AIRPORTS, HOTELS, RESTAURANTS,
FILLING STATIONS
, etc.).
Info on car pos. - To get a list of facilities
(special locations) related to the current car
position.
Destination map - To enter a destination by
means of a map.
Destination store - To store destination
addresses in a private database or to recall
the last used destination addresses. In
addition you can specify via points
(intermediate stops) referring to the entered
destination address.
Return: To return to the Main Menu. 
						

							CARiN Navigation System
9
HOW TO ENTER THE
DESTINATION ADDRESS
Destination input – City
City: If you like to be guided only to the city
border, you simply have to enter the city
name:
1.
 Select Destination Input in the Main
Menu and confirm the selection.
2.
 Select City and enter the city name by
use of the typewriter.
NOTE: To delete a character previously
entered, select Delete with the rotary switch
and press to confirm.
3. Select OK and confirm by pressing the
Rotary switch.
4.
 Select Guidance from the Destination
Input menu to enter the guidance
screen.
5.
 You will hear “You have arrived”
when reaching the city limits.
NOTE: If you use the typewriter the
previously entered characters are compared
with all database entries. You can only select
valid characters (highlighted) now. If there is
a unique entry in the database, the system
completes the name automatically.
NOTE: If there is more than one database
entry with the same name, the cursor is
automatically placed on List. Select the
desired entry from the list. If the number of
data entries is very large, setting up the list
may take a few seconds.
NOTE: If a city name, road name or facility
name you entered are not unique in the
database, the navigation system presents
you a list of all identical entries distinguished
by additional information. If for example a
road name is not unique in the entered city, a
list of all district names referring to this road
is presented.
NOTE: If more than one country is available
in the database you may specify the
destination country by selecting the option
Cntry. Select the desired country from the
list and confirm your choice. 
						

							CARiN Navigation System
10
Destination input – Road
Road: If you want to be guided to a certain
road or location, you have to enter a road
name in addition to the city name.
1.
 Select Road from the Destination Input
menu.
2.
 Enter the name of the road that you
want. Follow the procedure described
above.
3.
 Confirm your entry with OK.
4. Select Guidance.
5.
 You will hear You have arrived when
reaching the specified road.
NOTE: If in the database house numbers are
available for the entered road, you can
specify a destination address more precisely
by entering the desired house number using
the typewriter. Single house numbers are not
recognised, they are incorporated within a
block of house numbers and they are
digitised.
Junction: The navigation system offers you
the possibility to specify your destination
more precisely by entering a junction. To
enter a junction, proceed as follows:
1.
 Enter a city name and a road name as
described above.
2.
 Select Junction from the Destination
Input menu.
3.
 Enter the junction you want to be guided
to by means of the typewriter or select
an entry from the list.
NOTE: If there are only a few database
entries, the list is presented immediately.
4. Select Guidance and press the rotary
switch.
5.
 You will hear You have arrived when
reaching the specified junction. 
						

							CARiN Navigation System
11
Destination input from database entries
You can also enter destination addresses
(
city, road and then junction) by selecting
database entries. For that purpose the list
display is used.
Proceed as follows:
1.
 Select City, Road or Junction from the
Destination Input menu.
2.
 Enter the initial letters of the desired
city, street and then junction with the
typewriter. Without entering an initial
letter the list starts with the first
database entry.
3.
 Select List from the typewriter window.
NOTE: A list of entries beginning with the
characters already entered is displayed.
4. Select the desired list entry and confirm
by pressing the rotary switch.
NOTE: To abort the data entry select Quit
from the list and confirm by pressing the
rotary switch.
ENTERING A DESTINATION BY
SELECTING A SPECIAL FACILITY
Destination input – Special facility
You can also specify your destination by
selecting a special facility stored in the
database. This could be for example airports,
hotels, filling stations or car garages etc.
NOTE: Special facilities are displayed as
icons in the destination map (explanations of
symbols are at the end of this publication).
NOTE: The number of displayed facilities
depends on the map scale and on the
availability of these facilities in the database. 
						

							CARiN Navigation System
12
FACILITIES RELATED TO THE
DESTINATION CITY
If you want to display a list of facilities related
to your destination address, at least enter the
name of the city in the Destination Input
menu.
1.
 Select Info on dest.  from the
Destination Input menu. A list of
categories specifying the special
facilities is presented.
2.
 For small cities and villages usually only
the 
CITY CENTRE option is available.
3.
 If you choose this option, you will be
guided to the centre of the city or village.
4.
 Select the desired category (for
example 
PETROL STATION, HOTEL,
RESTAURANT
, etc.)
NOTE: If a larger number of facilities are
available in the database, the typewriter is
shown.
5. Enter the name of the desired facility or
select 
List.
6.
 Select the desired facility from the list.
7.
 Confirm your choice with OK and then
select 
Guidance and press the rotary
switch
You will hear 
You have arrived when
reaching the specified facility.FACILITIES OF NATIONALIMPORTANCE
If you are searching for facilities of national
importance (for example 
AIRPORT, FERRY,
etc.), you first have to delete a destination
city previously entered.
1.
 If a destination city is already entered,
delete this destination by selecting
Delete dest. in the Destination Input
menu.
2.
 Select Info on dest. from the
Destination Input menu.
NOTE: A list of categories specifying the
special facilities is presented.
3. Select the desired category (for
example 
AIRPORT, FERRY, etc.)
4.
 Proceed as described previously.
FACILITIES LOCATED AROUND THE
CURRENT CAR POSITION
You can also specify a destination address
by selecting a special facility from 
the Info on
car pos
. option.
1.
 Select Info on car pos. from the
Destination Input menu.
NOTE: A list of categories specifying the
special facilities located around the current
car position is presented.
2. Select the desired category.
3.
 Proceed as described previously. 
						

							CARiN Navigation System
13
DESTINATION INPUT BY MAP
Destination input - Map
If you do not know a road name or a special
location in the city you want to travel to, or if
you want to specify the destination more
precisely, you can enter the target by means
of a map. Destination input by map is only
possible when the car speed does not
exceed 30 km/h (20 mph).
1.
 Select Destination map from the
Destination Input menu and confirm
your selection.
2.
 A map with the area around the
specified destination address, or a map
with the area around the current car
position (if no destination was entered
before) is presented.
3.
 Pressing the rotary switch opens a
menu in the upper right corner of the
screen that offers you the following
functions:
Return - Return to Destination Input menu.Cursor - To allow movement of the
horizontal and vertical line of the crosshair.
Scale - To change the map scale.
Store - To store the selection as the new
destination address.
4.
 Activate the crosshair cursors by
selecting 
Cursor, the horizontal cursor
is highlighted.
5.
 Move the horizontal line with the rotary
switch to the desired position.
6.
 Press the rotary switch and the vertical
cursor is highlighted.
7.
 Move the vertical line with the rotary
switch to the desired position and then
press the switch.
8.
 To store the selected location as the
destination address press the rotary
switch and then select 
Store from the
menu.
9.
 Storing a destination address from the
destination map is only possible with
map scales 100 m (125 yd), 200 m (250
yd), 500 m (450 yd) and 1 km (1100 yd).
NOTE: If you move one of the crosshair lines
to the edge of the screen, the map is
automatically shifted. 
						

							CARiN Navigation System
14
HINT: First select a large map scale for a
coarse specification of the destination. Then
choose a smaller scale for exact
determination and storage of your
destination.
STAGES ON THE WAY TO THE
DESTINATION
On the way to the destination address it is
possible to go for additional 
via points
(stages). For more information (see VIA
POINTS, page 21) 
						

							CARiN Navigation System
15
GUIDANCE SCREEN
If you entered a valid destination and you
selected Guidance in the Main Menu or the
Destination Input Menu, the 
guidance
screen
 appears.
The guidance screen offers the following
information:
1.
 Current car position - Road name, city
name and village name if stored in the
database.
2.
 Visual guidance advice - Diagram of
the next junction or turning. In addition
direction changes are announced by
voice messages.
3.
 GPS reception status - As soon as
valid positional data is received by the
GPS, the colour of the satellite icon
changes from red to green.
4.
 Turn into street – The road you have
to turn into next.
5.
 Distances to the next direction
change - The measuring units aredependent on the system settings. (See
System Settings, page 23)
6.
 Options menu – Menu (for Main Menu)
or Map (for route map) or Via point (for
display of the next via point, if entered).
7.
 Target direction arrow - Shows the
airline direction to the selected
destination.
8.
 Distance to the destination - Real
driving distance as soon as a route is
planned. The measuring units are
dependent on the system settings. (See
System Settings, page 23).
9.
 Status line
VOICE MESSAGES
As soon as you activate the guidance
function the system will give you acoustic
guidance advice in addition to the diagrams
in the guidance screen.
Example - You are approx. 200 m (220 yd)
away from the junction where you have to
turn right. The system at first gives you the
advice 
In 200 metres turn right. In the
guidance screen you see a preliminary
guidance advice (diagram) with the driving
direction and 200 m for the distance to the
turning point.
Approximately 50 m (55 yd) away from the
junction you hear 
Turn right. At the same
time the diagram changes. A simplified
plotting of the junction is shown.
GUIDANCE