Land Rover Range Rover Carin 1999 Navigation System Rover Manual

							CARiN Navigation System
16
NOTE: If you did not hear one of the voice
messages you can repeat the current
guidance advice by pressing the repeat
button to the right of the screen (see
Controls and Display - page 5) as long as it
is valid.
AUTOMATIC RE-ROUTING
IIf you dont wish to follow the guidance
advice, missed the advice or it is not possible
to follow the route due to roadworks, traffic
jams or hazards, the system automatically
plans a new route within a few seconds
GUIDANCE IN PARTLY DIGITISED AREAS
Partly digitised map
In rural areas and smaller cities not every
road is stored on the CD-ROM. When you
leave a digitised road, the system
automatically switches from the guidance
screen to a map display, 500 m (550 yd)
scale. 
No route planning is possible. Drive
in direction of a displayed (digitised) road.
The map shows the current car position and
the driving direction as a black icon (circle
with directional arrow). As soon as you reach
a digitised road the system switches back to
guidance and plans a new route.GUIDANCE WITH ROUTE MAP
Route map
If you choose the option 
Map in the guidance
screen, the route map appears on the
display. The car position is shown as a circle
with a directional arrow. The planned route is
shown white.
In addition a simplified plotting of guidance
advice and the distance to the next advice
are shown in the upper right corner of the
screen.
Press the rotary switch to open a menu with
the following options:
Return - Back to the guidance screen.
Scale - Changes the scale of the map.
Positioning - Selects the orientation of the
map (Northwards or Steer dir.*).
* If the map is displayed in Steer dir. mode
only, the scale of the map is 100 m, 200 m,
500 m or 1 km. 
						

							CARiN Navigation System
17
NOTE: After approximately 3 seconds the
menu is automatically closed, if you do not
press the rotary switch.
Emergency Menu
Select 
Emergency from the Main menu to
enter the Emergency menu. The menu
shows you the following information:
•
 The current car position with country,
city, road and the longitude and latitude
position determined by the received
GPS data.
•
 The country-specific emergency phone
number.
•
 A user-programmable Assistance phone
number.
The Emergency function determines the car
position with an accuracy of approx. 30
m.(33 yd).
NOTE: The country, city and street name areonly displayed if you travel within the
boundaries of the CD-ROM currently loaded.
If no CD or the incorrect CD is loaded, only
your current longitude and latitude co-
ordinates will be displayed, as long as the
Global Positioning System is operating
properly.
NOTE: The country-specific Emergency
phone number is only displayed, if you travel
within the boundaries of the currently loaded
CD-ROM.
STORING AN ASSISTANCE NUMBER
You can store a telephone number in the
Emergency menu, for example the number
of a breakdown service, automobile club, etc.
1.
 From the Emergency menu select
Setting. The typewriter window is
opened.
2.
 Enter the telephone number you want to
store for assistance.
3.
 Select OK from the typewriter window to
confirm your entry.
4.
 The stored number appears in the
Emergency menu.
5.
 To leave the Emergency menu, select
Return and press the rotary switch.
EMERGENCY MENU 
						

							CARiN Navigation System
18
Alternative route
You can have the navigation system
calculate an alternative route during
guidance for an adjustable distance.
Use this function for example to get around
traffic jams or if you dont agree with the
suggested route plan.
The alternative route is calculated from the
current car position for the selected distance.
1.
 Briefly press the Reroute button
located on the right of the screen (see
Controls and display – page 5).
2.
 The Alternative route menu is shown,
select  Yes.
3.
 If you agree with the displayed distance,
simply confirm by pressing the rotary
switch. Otherwise move the cursor on
the distance data and confirm by
pressing the rotary switch. Select the
desired minimum distance between 1and 10 km (1 and 6 miles) for the
alternative route you want to be planned
by the navigation system.
4.
 Confirm the selected distance by
pressing the rotary switch.
5.
 Confirm the procedure by selecting the
option Yes and pressing the rotary
switch.
6.
 Within a few seconds an alternative
route is calculated for the chosen
distance.
7.
 If you dont want an alternative route,
cancel the procedure by selecting No
and pressing the rotary switch
NOTE: The navigation system also plans a
new route automatically when leaving the
advised route.
NOTE: Simply leave the advised route to
bypass traffic jams or to drive a route of your
choice. The system will automatically
calculate a new route within a few seconds
.
ALTERNATIVE ROUTE 
						

							CARiN Navigation System
19
Destination store
The navigation system allows you to store 30
destination addresses in a personal address
book. Therefore the system has a non-
volatile memory. This is useful for addresses
you frequently use.
Select 
Destination store from the
Destination Input menu and confirm your
selection.
The destination store menu is shown. The
following menu options are available:
Store address - To store a destination
address in the personal address book.
Load address - To recall a destination
address previously stored in the personal
address book.
Prev. destinations - To reload one of the 10
destinations last used for guidance into the
Destination Input screen.Via point input - To enter via points you
want to pass on the way to your destination.
List via point - To show the list of stored via
points (max. 25).
Name - To enter a name for the destination
address (consisting of max. 10 characters).
Delete address - To delete an entry from the
personal address book.
Del. prev. dest. - To delete the 10
destination addresses last entered.
Delete via point: To delete an entry from the
list of via points.
Quit: To leave the destination store menu.
CONTENTS OF AN ADDRESS
BOOK ENTRY
You can store the following data in an
address book entry:
Name - A name for the destination address
consisting of a maximum of 10 characters
(optional).
City - The name of the city.
Road - The name of the road (optional).
Junction - A junction to specify your
destination more precisely (optional). or a
special facility from 
Info on dest. or Info on
car pos
. (optional).
DESTINATION STORE 
						

							CARiN Navigation System
20
Note: The minimum number of entries is 30
for the personal address book. The number
of entries can increase to 100 dependent on
the amount of information stored (e.g. with or
without  the optional information).
Note: If no address is stored in the address
book, the Load address option can not be
selected.
Note: If the memory is full, the Store
address option in the Address book menu
can no longer be selected.
HOW TO STORE AN ADDRESS IN THE
PERSONAL ADDRESS BOOK
If you have not entered a destination address
yet:
1.
 Enter the desired data (city, road,
junction or special facility) of the desired
destination in the 
Destination Input
menu.
2.
 Select Destination store from the
Destination Input menu.
3.
 If you like you can enter a name for the
destination address. Select Name and
enter any character string of max. 10
characters. Confirm your entry by
pressing the rotary switch.
4.
 The entered name is now shown as the
new menu title.
5.
 Select Store address and confirm by
pressing the rotary switch.6.
 Now the address is stored in the
address book. The menu title now
changes back to Name.
LOAD ADDRESSES FROM THE
ADDRESS BOOK
1.
 Select Load address from the
destination store menu.
NOTE: The list of addresses already stored
in the address book is shown.
2. Select the desired address from the list
with the rotary switch and confirm by
pressing the switch.
3.
 The selected address is registered as
the new destination address. 
						

							CARiN Navigation System
21
Via points
If you like to pass further via points on the
way to your destination address, you can
store these via points in the 
destination
store
. The system then calculates the route
so that the 
via points are passed in the
order they are stored. As soon as a valid
destination address is entered, you can store
via points for this particular destination.
STORING VIA POINTS
Select 
Via point input from the destination
store menu. The Via Point Input menu is
displayed with the following options:
City - To enter the country and city name of
the via point.
Road - To enter the road name.
NOTE: You can do without entering a road
name if you only want to travel through the
desired city.
Junction - To enter a junction for more
precise distinction selection (optional).
Store via point - To store the entered via
point in the memory.
Info on dest. - To get a list of facilities
related to the entered via point.
Info on car pos. - To get a list of facilities
related to the current car position.
Destination map - To enter a via point by
means of a map.
Return - To return to the destination store
menu.
1.
 Enter the data (city, road, junction or
special facility) of the desired via point.
2.
 Select Store via point and confirm by
pressing the rotary switch.
3.
 The system returns to the destination
store menu.
NOTE: The maximum number of via points is
limited to 25.
NOTE: The via points are reached in the
order of entry.
NOTE: You can enter new via points at any
time on the way to your destination address.
NOTE: When you have passed a certain via
point, it is deleted from the list of via points.
VIA POINTS 
						

							CARiN Navigation System
22
NOTE: If you delete a destination address,
the system asks you if you also like to delete
the list of via points. If you answer No, the
stored via points are used for the new
destination address.
LIST VIA POINTS
If you like to select List via points proceed as
follows:
1.
 Select List via point in the destination
store menu.
2.
 A list of via points for the current
destination address is shown.
3.
 To return to the destination store menu
select 
Quit from the list.
DELETE VIA POINTS
If you like to delete via points already entered
proceed as follows:
1.
 Select Delete via point from the
destination store menu.
2.
 The list of entered via points is shown.
3.
 Select the via point to delete with the
rotary switch and confirm by pressing
the switch.
To avoid deleting via points by mistake the
system will ask are you sure you want to
proceed.
If the answer is 
“Yes”, the selected via point
is deleted from the list.To delete all via points without deleting the
current destination address proceed as
follows:
1.
 Store the current destination address in
the address book.
NOTE: If the current destination address is in
the address book, skip point 1.
2. Select Delete destination from the
Destination Input menu.
3.
 Confirm the security check Delete via
points
? with Yes.
4.
 All via points and the destination
address are deleted.
5.
 Load the last used destination address
with 
Load address from the destination
store menu.
BYPASSING VIA POINTS
During guidance you can decide whether you
want to reach the next via point or to bypass
it. If you want to bypass the next via point
proceed as follows:
1.
 Select Via point from the guidance
screen and confirm by pressing the
rotary switch.
2.
 The menu Next via point is shown.
3.
 If you select “No” from the menu, the
displayed via point is bypassed and
deleted from the list of via points. 
						

							CARiN Navigation System
23
System settings
To adjust the system to suit the individual a
lot of the settings can be modified as follows:
Select 
Settings from the Main Menu, the
System Settings menu is shown, with the
following options:
LANGUAGE
The following languages are currently
available on a separate language CD:
•
 British English
•
 American English
•
 French
•
 German
•
 Dutch
•
 Italian
•
 Spanish
To select the language, proceed as follows:
1.
 Select Language from the System
Settings
 menu and follow the
instructions.ROUTE SELECTION
There are four options, which affect route
planning. These are as follows:
•
 Optimised for travel time (good
compromise for any situation)
•
 Optimised for travel distance
(recommended for routes within a city)
•
 As much as possible along main
roads (recommended, if travelling on
main roads is preferred)
•
 As little as possible along main
roads (recommended, if travelling on
main roads is not preferred)
The selected option is shown as an icon in
the status line of the display.
SCREEN SETTINGS
NOTE: Screen settings allow adjustment
to the screen configuration, selection of a
variety of colour combinations and the
information shown in the status line of
the screen.
Select Screen config. from the System
settings menu, the 
Screen Settings menu is
shown offering you the following options:
Day colour - Select one out of six colour
combinations for the daytime display. The
selected colour is active when the headlights
are turned off.
SYSTEM SETTINGS 
						

							CARiN Navigation System
24
Screen settings
Status line left - Select the kind of
information shown in the lower left corner of
the screen:
1.
 None - Status line left switched off.
2.
 Clock - Time display.
3.
 Date - Date display.
4.
 Remaining travel time – Calculated
time remaining until you arrive at the
next via point or destination address (if
no via points were entered) .
5.
 Estimated time of arrival – Calculated
time of arrival at the next via point or
destination.
Night colour - Select one out of six colour
combinations for the night-time display. The
selected colour is active when the headlights
are turned on.Status line right: - Select the kind of
information shown in the lower right corner of
the screen. See 
Status line left for available
options.
Return - Return to the 
Main Menu.
SYSTEM INFORMATION
The System Information menu offers the
following options:
Diagnosis - To analyse soft- and hardware
problems (code protected).
Configuration -  Information on soft- and
hardware versions of the system (for service
purposes).
Default settings - To reset all user specific
settings (status line, screen colours, etc.) to
their factory settings.
Return - Return to the Main Menu.
An authorised service centre for
service purposes should only
perform the Diagnosis option.
CAR POSITION
The 
Car Position Input menu allows you to
enter a new car position manually (for
example for demo purposes).
WARNING 
						

							CARiN Navigation System
25
MEASURING UNITS
To select the appropriate measurement units
for distances being display. The following
measurement units are available:
Metric - The display is in kilometres and
metres.
Imperial – The display is in miles and yards;
US – The display is in miles, tenths of miles
and feet.
DATE/CLOCK
The Date/Clock menu allows you to set the
time and date format as well as the time
zone.
Time format - Select between 12 or 24 hour
format .
Set time zone - Adjust the difference
between local time and Universal Time Co-
ordinated (time received by the system via
GPS) with the rotary switch6.
Standard
TimeDaylight
Saving
Central
European Time+1.0 + 2.0
Greenwich
Mean Time,+ 0.0 + 1.0
Date format - Select between day/month/
year and month/day/year.
Return - Return to the 
Main Menu.VOLUME
If you select 
Volume the Volume Control
menu with the following options is shown:
SDVC curve - Select one of the SDVC
curves for Speed Dependent Volume
Control. This is to compensate for the
surrounding noise by increasing the volume
level depending on the car speed. Find a
suitable level by trying out the different
curves.
Voice off / on - To activate / deactivate the
acoustical guidance advice. The 
 icon
appears in the status line if the voice option
is set to off.
Volume - To adjust the volume level of
acoustical advice. Place the cursor on option
Volume and confirm by pressing the rotary
switch. A volume slider is shown. Adjust the
desired volume by turning the rotary switch.
Press the rotary switch again to store this
setting.
Return - To return to the Main Menu.
The Navigation System is based on a
database stored in a special format on a CD.
It is recommended always to use the latest
update of this CD.
If you travel to different countries or you wish
to have more detailed information on a
special area, ask your dealer for the suitable
CD
CD INFORMATION