Land Rover Range Rover Carin 1999 Navigation System Rover Manual

CARiN Navigation System
6
NOTE: If the navigation system is switched
off in stand-by mode it restarts in stand-by
mode when the ignition is switched on again.
To activate the system, press the rotary
switch.
The navigation system menus are based on
the following screen layout:
Menu screen
1.
 Information window
2.
 Menu title
3.
 Country code of the inserted CD map
4.
 Destination address - (See Destination
Input, page 7).
5.
 Input window
6.
 Menu options - Highlighted options can
be selected.
NOTE:...

CARiN Navigation System
7
MENU OPTIONS
Main menu
NOTE: Move the cursor (highlighted field)
with the rotary switch
 and press to accept
selection.
NOTE: The cursor automatically skips
options which are not available (for example,
if you did not specify a destination address).
You can select the following menu options in
the Main Menu.
Destination input - This option enters the
Destination Input menu. Select this option to
enter the city, road, junction or the special
facility of the destination you want...

CARiN Navigation System
8
DESTINATION INPUT
Destination input menu
Select 
Destination input from the Main
Menu and the relevant menu is presented.
You can then enter the destination address
in three different ways:
1.
 Letter-by-letter using a typewriter;
2.
 A list of data entries from the systems
database (on the CD-ROM);
3.
 Input using a map and crosshairs.
The following options are available:
City: To enter the country and city name of
the destination address.
NOTE: Only if more than one country...

CARiN Navigation System
9
HOW TO ENTER THE
DESTINATION ADDRESS
Destination input – City
City: If you like to be guided only to the city
border, you simply have to enter the city
name:
1.
 Select Destination Input in the Main
Menu and confirm the selection.
2.
 Select City and enter the city name by
use of the typewriter.
NOTE: To delete a character previously
entered, select Delete with the rotary switch
and press to confirm.
3. Select OK and confirm by pressing the
Rotary switch.
4.
 Select Guidance...

CARiN Navigation System
10
Destination input – Road
Road: If you want to be guided to a certain
road or location, you have to enter a road
name in addition to the city name.
1.
 Select Road from the Destination Input
menu.
2.
 Enter the name of the road that you
want. Follow the procedure described
above.
3.
 Confirm your entry with OK.
4. Select Guidance.
5.
 You will hear You have arrived when
reaching the specified road.
NOTE: If in the database house numbers are
available for the entered road, you...

CARiN Navigation System
11
Destination input from database entries
You can also enter destination addresses
(
city, road and then junction) by selecting
database entries. For that purpose the list
display is used.
Proceed as follows:
1.
 Select City, Road or Junction from the
Destination Input menu.
2.
 Enter the initial letters of the desired
city, street and then junction with the
typewriter. Without entering an initial
letter the list starts with the first
database entry.
3.
 Select List from the...

CARiN Navigation System
12
FACILITIES RELATED TO THE
DESTINATION CITY
If you want to display a list of facilities related
to your destination address, at least enter the
name of the city in the Destination Input
menu.
1.
 Select Info on dest.  from the
Destination Input menu. A list of
categories specifying the special
facilities is presented.
2.
 For small cities and villages usually only
the 
CITY CENTRE option is available.
3.
 If you choose this option, you will be
guided to the centre of the city or...

CARiN Navigation System
13
DESTINATION INPUT BY MAP
Destination input - Map
If you do not know a road name or a special
location in the city you want to travel to, or if
you want to specify the destination more
precisely, you can enter the target by means
of a map. Destination input by map is only
possible when the car speed does not
exceed 30 km/h (20 mph).
1.
 Select Destination map from the
Destination Input menu and confirm
your selection.
2.
 A map with the area around the
specified destination...

CARiN Navigation System
14
HINT: First select a large map scale for a
coarse specification of the destination. Then
choose a smaller scale for exact
determination and storage of your
destination.
STAGES ON THE WAY TO THE
DESTINATION
On the way to the destination address it is
possible to go for additional 
via points
(stages). For more information (see VIA
POINTS, page 21) 

CARiN Navigation System
15
GUIDANCE SCREEN
If you entered a valid destination and you
selected Guidance in the Main Menu or the
Destination Input Menu, the 
guidance
screen
 appears.
The guidance screen offers the following
information:
1.
 Current car position - Road name, city
name and village name if stored in the
database.
2.
 Visual guidance advice - Diagram of
the next junction or turning. In addition
direction changes are announced by
voice messages.
3.
 GPS reception status - As soon as
valid...