Land Rover Range Rover 1999 Owners Handbook Aus Rover

Message centre
28 FUSE FAILURE MESSAGES
The following fuse failure messages are INFORMATION CATEGORY 1 messages. (seeFusesfor
fuse replacement information).
Message Meaning Action
FUSE 2 to 22 FAILED Fuse blown Fit a new fuse
Notes:
1.The fault message for fuse 12 may also be
displayed in conjunction with the message
HEATED REAR WINDOW. This will occur
if the heated rear screen is operated after
fuse 12 has blown.
2.In all cases, the fuse failed message will
alternate with the appropriate description...

Message centre
29 BULB FAILURE MESSAGES
The following are INFORMATION CATEGORY 1 messages. (seeBulb replacement).
Message Meaning What to do?
RH DIP BEAM Bulb failed Replace bulb
LH DIP BEAM Bulb failed Replace bulb
RH MAIN BEAM One or both bulbs failed Replace bulb
LH MAIN BEAM One or both bulbs failed Replace bulb
RH SIDE LIGHT Bulb failed Replace bulb
LH SIDE LIGHT Bulb failed Replace bulb
FRONT INDICATOR One or both bulbs failed Replace bulb
RH FRONT FOG Bulb failed Replace bulb
LH FRONT FOG Bulb...

Message centre
30 MISCELLANEOUS FAULT MESSAGES
The following are INFORMATION CATEGORY 1 messages.
Message Meaning What to do?
LOW SCREEN WASH as message suggests fill the screenwash reservoir
GEARBOX FAULT as message suggests seek qualified assistance
TRACTION FAILURE as message suggests seek qualified assistance
LOW BRAKE FLUID as message suggests top-up the fluid reservoir
and/or seek qualified
assistance
ODOMETER ERROR as message suggests seek qualified assistance
KEY BATTERY LOW as message suggests...

Message centre
31 Message Meaning What to do?
WINDOW NOT SET the one-touch and anti-trap
functions are not setset the one-touch and
anti-trap functions see
Electric windows
SUNROOF NOT SET the one-touch and anti-trap
functions are not setset the one-touch and
anti-trap functions see
Electric sunroof
WINDOW SET you have successfully set the
one-touch and anti-trap functionsno action required
SUNROOF SET you have successfully set the
one-touch and anti-trap functionsno action required
TRACTlON OVRHEAT the...

Message centre
32 Message Meaning What to do?
MIRROR DIP ON the door mirror dip function for
driving in reverse gear has been
turned onno action required
MIRROR DIP OFF the door mirror dip function for
driving in reverse gear has been
turned offno action required
*This message alternates with the message REFER HANDBOOK. When this is displayed, refer
to the appropriate section in this handbook for further information.
The following are INFORMATION CATEGORY 3 messages;
Message Meaning What to do?
SUNROOF...

Message centre
33 Message Meaning What to do?
SELECT NEUTRAL you have made an attempt to change
gear ranges without the gearbox
being in NEUTRALselect neutral
SLOW DOWN your current road speed is too high
to perform a transfer box range
changestop the vehicle before
changing range 

Seats
34 MANUALLY-OPERATED FRONT SEATS
WARNING
To avoid the risk of loss of control and
personal injury, never adjust the drivers
seat or seatback while the vehicle is in
motion.
DO NOT allow occupants to travel with the
seat backs reclined steeply rearwards.
Optimum benefit is obtained from the seat
belt with the seat back angle set to 15
degrees from the upright (vertical) position.
Forward/backward movement
Raise the bar to move the seat forward or
back. Ensure that the seat is locked in position...

Seats
35
Head restraint adjustment
Head restraints are designed to restrain
rearward movement of the head in the event
of a collision.
Depress the button to raise or lower. Tilt the
angle of the restraint to ensure it is as close to
the back of the head as possible.
WARNING
·DO NOT drive with the head restraints
removed.
·ALWAYS adjust the height of the head
restraint to support the back of the head,
NOT the neck.
IMPORTANT INFORMATION
Your vehicle is fitted with side impact
airbags. Refer to the Airbag...

Seats
36 POWER OPERATED FRONT SEATS
(where fitted)
Seat adjustment is only possible when the
starter switch is turned to positions I or II
or with a front door open when the starter
switch is at position 0.
The following functions are available:
Seat forward & rearward
Push and hold the switch forwards or
backwards to move the seat to the desired
position.
WARNING
To avoid the risk of loss of control, DO NOT
adjust the drivers seat while the vehicle is
in motion.
Seat cushion angle
Twist the switch...

Seats
37
Lumbar support adjustment
Press the upper button to increase, and the
lower button to reduce, lumbar support.
Seat back adjustment
Twist the switch forward or backward until the
desired seat back angle is achieved.
WARNING
DO NOT allow occupants to travel with the
seat backs reclined steeply rearwards.
Optimum benefit is obtained from the seat
belt with the seat back angle set to 15
degrees from the upright (vertical) position.
Head restraint adjustment
Raise or lower the switch until the head...