Land Rover Fuel Injection System Manual
View the Land Rover Fuel Injection System Manual for free. All the Land Rover manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 1
LAND ROVER
LAND ROVER
FUEL INJECTION SYSTEM
DESIGN AND FABRICATION
AUTHOR: CIARAN J BRADY
(cbrady at conehead dot org)
PROJECT DURATION: Feb to May 2010
Document version – 2.06 – 28th Aug 2010
http://www.conehead.org/Projects/Landrover/EFi/efi%20-%20web.htm (1 of \
55)16/10/2010 9:03:18 a.m.](http://img.usermanuals.tech/thumb/2848/48521/w300_land-rover-fuel-injection-system-0.png "Page 1
LAND ROVER
LAND ROVER
FUEL INJECTION SYSTEM
DESIGN AND FABRICATION
AUTHOR: CIARAN J BRADY
(cbrady at conehead dot org)
PROJECT DURATION: Feb to May 2010
Document version – 2.06 – 28th Aug 2010
http://www.conehead.org/Projects/Landrover/EFi/efi%20-%20web.htm (1 of \
55)16/10/2010 9:03:18 a.m.")
![Page 3
LAND ROVER
Figure 13 – Rover V8 cleared down to the valley
Figure 14 – Left and right views of the V8
Figure 15 – Underside of original carburettor manifold (showing the \
plumbing)
Figure 16 – Underside of injection manifold
Figure 17 – Cooling plumbing for the heater matrix
Figure 18 – Intake front and rear view
Figure 19 – Injector testing results
Figure 20 – Finalised injection intake base
Figure 21 – Underside of plenum intake trumpet housing (note vacuum \
ports)
Figure 22 – Final position of the...](http://img.usermanuals.tech/thumb/2848/48521/w300_land-rover-fuel-injection-system-2.png "Page 3
LAND ROVER
Figure 13 – Rover V8 cleared down to the valley
Figure 14 – Left and right views of the V8
Figure 15 – Underside of original carburettor manifold (showing the \
plumbing)
Figure 16 – Underside of injection manifold
Figure 17 – Cooling plumbing for the heater matrix
Figure 18 – Intake front and rear view
Figure 19 – Injector testing results
Figure 20 – Finalised injection intake base
Figure 21 – Underside of plenum intake trumpet housing (note vacuum \
ports)
Figure 22 – Final position of the...")
![Page 4
LAND ROVER
Introduction
The land rover came with a standard induction system consisting of twin \
1.75” SU carburettors
fitted to a 3.5 litre 9.35:1 compression ratio rover V8 using electronic\
ignition. The vehicle
employed a stainless steel exhaust system coupled with log style exhaust\
manifolds. However,
even after rolling road jetting of the carburettors and with good and ti\
ght linkages for both throttle
and choke, they were the usual SU horror to drive with. The mixture was \
generally...](http://img.usermanuals.tech/thumb/2848/48521/w300_land-rover-fuel-injection-system-3.png "Page 4
LAND ROVER
Introduction
The land rover came with a standard induction system consisting of twin \
1.75” SU carburettors
fitted to a 3.5 litre 9.35:1 compression ratio rover V8 using electronic\
ignition. The vehicle
employed a stainless steel exhaust system coupled with log style exhaust\
manifolds. However,
even after rolling road jetting of the carburettors and with good and ti\
ght linkages for both throttle
and choke, they were the usual SU horror to drive with. The mixture was \
generally...")