Land Rover Freelander 2004my Electrical Library Rover Manual

DESCRIPTION AND OPERATION
4.22FREELANDER 04MY
Down
When down operation of the tail door window is requested, the CCU (C0429) provides a feed 
to the window lift relay module (C0043) on an RG wire. The relay module (C0043) is now 
able to provide a battery feed from fuse 31 of the passenger compartment fuse box (C2625) 
to the window motor (C0612) on a UG wire. Current flows across the motor windings 
(C0612) and back to the relay module (C0043) on a UB wire. The relay module (C0043) is 
earthed on a B...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.23
SUNROOF
DESCRIPTION
General
An electrically operated sunroof is fitted to 5 door vehicles only. The sunroof will only operate 
when the ignition switch is in the ignition position, and is controlled via a non-latching rocker 
switch mounted on the centre console. 
When the upper half of the switch is pressed and held, the sunroof will move to its tilt 
position. When the lower half of the switch is pressed and held, the sunroof will return to its 
closed...

DESCRIPTION AND OPERATION
4.24FREELANDER 04MY
Close
When the top half of the sunroof switch is depressed (with the sunroof in the fully open 
position), a feed is provided to the sunroof motor (C0614) from the switch (C0363) on an S 
wire. Current flows across the motor (C0614) and back to the switch (C0363) on a G wire. 
The switch (C0363) is earthed on a B wire. The motor will now power the sunroof back to 
the fully closed position.
Tilt
When the top half of the sunroof switch is depressed (with the...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.25
DOOR MIRRORS
DESCRIPTION
General
The electrically operated door mirrors are controlled via the multi-directional switch mounted 
on the fascia adjacent the instrument pack. Rotating the switch to the left, allows movement 
of the LH door mirror. A movement in the switch position will now be replicated by the LH 
door mirror. Rotating the switch to the right allows movement of the RH door mirror in the 
same way. The central switch position inhibits operation...

DESCRIPTION AND OPERATION
4.26FREELANDER 04MY
Down
When the door mirror switch is moved downwards, it provides a feed to the LH vertical motor 
(C0319) on an SW wire. Current flows across the motor (C0319) and back to the switch 
(C0066) on a BP then BY wire. The switch (C0066) provides the motor an earth path on a B 
wire. The motor will move the mirror downwards until the switch is released, or it reaches 
the end of its travel.
Left
When the door mirror switch is moved to the left, it provides a feed...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.27
Left
When the door mirror switch is moved to the left, it provides a feed to the RH horizontal 
mirror (C0319) on an SW wire. Current flows across the motor (C0319) and back to the 
switch (C0066) on a BN wire. The switch (C0066) provides the motor an earth path on a B 
wire. The motor will move the mirror left until the switch is released, or it reaches the end of 
its travel.
Right
When the door mirror switch is moved to the right, it provides a feed to...

DESCRIPTION AND OPERATION
4.28FREELANDER 04MY
FOLDING DOOR MIRRORS
DESCRIPTION
General
Certain markets are fitted with folding door mirrors. The door mirrors can be moved to their 
folded position by rotating the mirror switch to the centre position, then moving the switch 
downwards. Moving the switch downwards a second time returns the mirrors to their original 
position.
For more information on door mirror operation, refer to the  Door Mirrors  section of this 
manual.
 
+  DOOR MIRRORS. 
OPERATION...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.29
When the folding mirror ECU senses the door mirror switch has been pressed for a second 
time, it provides a feed to the LH folding mirror motor (C0444) on an O then B wire, and the 
RH folding mirror motor (C0444) on an O then R wire. Current flows across the motors 
(C0444) and back to the folding mirror ECU on an R then Y wire (LH) and a B then Y wire 
(RH).
NOTE: The LH and RH door mirrors have the same connector numbers as they utilise the 
same harness. 

DESCRIPTION AND OPERATION
4.30FREELANDER 04MY
HEATED SEATS
DESCRIPTION
General
The heated front seats are switched on and off by pressing either of the switches mounted 
on the centre console. The heated front seats are operated independently of each other. The 
switches also incorporate an illumination LED to show when the seat heaters are switched 
on.
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 
4 of the engine compartment fuse box...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.31
RH Seat
When the RH heated seat switch is pressed, current flows across the switch contacts 
(C0250) to the RH heated seat relay (C1221) on a UK then R wire. Operation of the heated 
seat relay (C1221) is controlled by the temperature sensor on a G wire. The temperature 
sensor is a normally closed switch. Current flows across the switch to earth on a G then N 
then B wire.
When the temperature of the seat is within acceptable levels, the heated seat relay...