Land Rover Freelander 2004my Electrical Library Rover Manual

DESCRIPTION AND OPERATION
4.102FREELANDER 04MY
Fast Wipe
Fuse 1 of the passenger compartment fuse box (C0581) provides an ignition feed to the 
wiper switch (C0035) on a G wire. When the wiper switch is moved to the fast wipe position, 
current flows across the switch (C0035) to the wiper motor (C0030) on a RG wire. Current 
flows across the motor fast speed windings and is earthed (C0030) on a B wire. 
Park
Fuse 1 of the passenger compartment fuse box (C0581) provides an ignition feed to the 
wiper...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.103
Wiper
The CCU (C0592) monitors the condition of the wiper switch (C0079) by providing a feed via 
the passenger compartment fuse box (C0589) on an RG wire. When the switch is pressed, 
current flows across the switch contacts (C0079) to earth on a B wire. When the CCU 
registers this earth, it provides a feed to the rear wiper relay (C0124) on a YB wire. The rear 
wiper relay contains two independent relays; a forward relay and a reverse relay. 
The...

DESCRIPTION AND OPERATION
4.104FREELANDER 04MY
The rear wiper relay (C0124) also provides a feed to the rear washer pump relay (C2624) 
on a GR wire. The energised washer pump relay (C2624) provides a feed to the washer 
pump (C0021) on a GB wire. The pump (C0021) is earthed on a B wire.
Tail Door Switch
The CCU (C0428) monitors the condition of the tail door switch (C0616) by providing a feed 
on a BO wire. The tail door switch is open circuit when the tail door is closed. When the tail 
door is opened,...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.105
BRAKE AND REVERSE LAMPS
DESCRIPTION
Brake Lamps
Three brake lamps are fitted to the rear of the vehicle. Two brake lamps are mounted above 
the rear bumper, and share a dual filament bulb with the tail lamps. A third, high mounted 
tail lamp is housed within a casting mounted on the tail door above the spare wheel.
NOTE: NAS vehicles are also fitted with a second pair of brake lamp bulbs. These operate 
in conjunction with the normal brake lamp bulbs. These...

DESCRIPTION AND OPERATION
4.106FREELANDER 04MY
Fuse 2 provides an ignition feed to the reverse lamp relay, which is also located in the 
passenger compartment fuse box. Fuse 2 (C0581) also provides an ignition feed to the 
brake pedal switch (C0075), and the reverse lamp switch (C0163) on G wires.
NOTE: The reverse lamp switch is fitted to manual transmission vehicles only. The reverse 
lamp relay is fitted to automatic transmission vehicles only.
Brake Lamps
The brake pedal switch (C0075) is provided an...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.107
HEAD, SIDE AND TAIL LAMPS
DESCRIPTION
General
The headlamp assemblies each contain a side lamp bulb and a dual filament headlamp bulb. 
The tail lamps and rear number plate lamp operate together with the side lamps and 
headlamps, and share a dual filament bulb with the brake lamps. The rear number plate 
lamp is incorporated into the tail door handle.
The side and headlamps are controlled via the lighting switch, which is mounted on the end 
of the LH...

DESCRIPTION AND OPERATION
4.108FREELANDER 04MY
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3, fusible link 9 and 
fusible link 12 of the engine compartment fuse box (C0632) on an R wire. Fusible link 12 
(C0570) provides a constant battery feed to the lighting switch (C0041) on a UN wire. A 
second constant battery feed is provided by fusible link 12 (C0575) to the lighting switch 
(C0041) on an RN wire.
Fusible link 9 (C0570) provides a constant battery...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.109
Headlamps
Dipped Beam
When the lighting switch is turned to the headlamp position, current flows across the switch 
(C0041) to fuse 19 and fuse 20 of the passenger compartment fuse box (C0587) on a UO 
wire. Fuse 19 (C0581) provides a feed to the RH dipped beam bulb (C0011) on a UB wire. 
Fuse 20 (C0581) provides a feed to the LH dipped beam bulb (C0009) on a UK wire. Both 
are earthed on B wires.
Main Beam
When the lighting switch is turned to the headlamp...

DESCRIPTION AND OPERATION
4.110FREELANDER 04MY
Headlamp Levelling
When the lighting switch is turned to the side or headlamp position, current flows across the 
switch (C0041) to fuse 7 of the passenger compartment fuse box (C0587) on an R wire. 
Fuse 7 (C0589) provides a feed to the headlamp levelling switch (C0093) on an RB wire. 
The switch (C0093) is earthed on a B wire.
The headlamp levelling switch has four pre-set positions. At each of the four switch 
positions, the contacts in the switch connect...

DESCRIPTION AND OPERATION
FREELANDER 04MY 4.111
HEAD, SIDE AND TAIL LAMPS – NAS
DESCRIPTION
General
The headlamp assemblies each contain a side lamp bulb and a dual filament headlamp bulb. 
The tail lamps and rear number plate lamp operate together with the side lamps and 
headlamps, and share a dual filament bulb with the brake lamps. Additional tail lamps are 
also incorporated within the E-post mounted lamp cluster. The rear number plate lamp is 
incorporated into the tail door handle.
The side and...