Land Rover Discovery Series Ii In Car Entertainment Nas Rover Manual

In-Car Entertainment
Discovery Series II 

The audio equipment fitted to your vehicle has been carefully chosen to add to
your motoring enjoyment.
Whether you drive for business, or purely for pleasure, we want you to enjoy
using your audio equipment, so please take a little time to read these
instructions and find out how to get the very best In-Car Entertainment!
As part of Land Rovers environmental policy, this publication is printed on paper made
from chlorine free pulp. 

1
In-Car Entertainment
Contents
Sound controls 2...................................................................................
Radio controls 4....................................................................................
Cassette player 5...................................................................................
Compact disc player 7...........................................................................
Radio tuning...

Sound Controls
2
1
2
ICE0107
SOUND CONTROLS
1. On/off and volume control
Press to switch on (display shows LAND
ROVER, followed briefly by CODE). Press
again to switch off.
Rotate steadily to right or left to adjust the
volume.
NOTE:The volume can also be adjusted using
the remote switches on the steering wheel
(see Owners handbook).
NOTE:If you have a car telephone with a
mute signal output connected to the stereo
system, radio, tape or CD play automatically
mutes when the telephone is in use....

Sound Controls
3
Balance:
Press three times, then rotate volume control
to left or right to adjust balance between left
and right speakers. Display shows:
BAL R 9 = max sound from RIGHT
BAL 0 = equal balance
BAL L 9 = max sound from LEFT
Fader:
Press four times, then rotate volume control
to left or right to adjust balance between
front and rear speakers. Display shows:
FAD F 9 = max sound from FRONT
FAD O = equal balance
FAD R 9 = max sound from REAR
Spatial:
Press five times, then rotate volume...

Radio Controls
4
MAN
3565948
7ICE0108
RADIO CONTROLS
3. FM waveband selector
Press briefly to select FM frequencies. There
are two FM bands (FM1 and FM2). Both have
the same tuning range, and each one can be
used to store six frequencies on the pre-set
buttons.
Press and hold to activate auto-store (on
FM2 only - see Auto-store).
4. AM waveband selector
Press briefly to select one of the three AM
bands (AM1, AM2 and WB). Both AM
wavebands can be used to store six stations
on the pre-set buttons. For more...

Cassette Player
5
1011121415
13 16ICE0109
CASSETTE PLAYER CONTROLS
10. Tape mode selector
Press to select tape play (display shows
SIDE-1 or SIDE-2).
If the set is switched off during tape play, the
cassette remains in stand-by mode. Play
resumes when the set is switched on again.
11. Cassette compartment
Insert the tape with the open side to the right
and push in gently. The radio mutes and tape
play starts immediately.
NOTE:At the end of either side of the tape,
play will automatically continue in the...

Cassette Player
6
1011121415
13 16ICE0109
14. Tape reverse
Press to play the opposite side of the tape.
15. Dolby B noise reduction *
Press when playing tapes recorded using the
Dolby B NR system (display shows DD).16. Tape scan button
Press the SCAN button to listen to the first
10 seconds of each track on the tape (both
sides). The display shows TAPE SCAN. The
scan continues until the button is pressed
again or until another function is selected.
* Noise reduction manufactured under license. Dolby and...

Compact Disc Player
7
1720
1819
ICE0110
COMPACT DISC PLAYER CONTROLS
(if fittted)
17. CD mode selector
Press to select CD player mode. Playback
starts from the point on the disc at which
play last stopped, or from the start of the
first disc if the magazine is newly inserted.
The display shows disc number (CD1) and
track number (01). If no magazine has been
inserted into the autochanger, NO
MAGAZINE is displayed.
At the end of each disc, playback
automatically continues with the next disc
(missing discs...

Radio Tuning
8
RADIO TUNING
If you know the frequency of the radio
station you are seeking, or you need to select
a radio station that is too weak to be found
by automatic tuning, use manual tuning, as
follows:
Select the desired waveband (FM or AM),
then press the MAN button (6). By briefly
pressing either tuning button (5), the
frequency changes (either up or down) in
steps of 0.1 MHz for FM, or 1 kHz for AM.
Fast manual tuning
By keeping either manual tuning button
depressed, the waveband is scanned...