Home
>
Land Rover
>
Automobile
>
Land Rover Defender Electrical Library 3rd Edition Nas Rover Manual
Land Rover Defender Electrical Library 3rd Edition Nas Rover Manual
Here you can view all the pages of manual Land Rover Defender Electrical Library 3rd Edition Nas Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 31
CIRCUIT OPERATION DEFENDER 90 NAS25With the column switch in the dip position, power from the column switch (C36-6) is fed to fuses 7 and 8 of the passenger compartment fuse box (C580-13) on a blue/red wire. With the column switch in the main beam position, power from the column switch (C36- 5) is fed to fuses 9 and 10 of the passenger compartment fuse box (C580-17) on a blue/white wire via a header joint (C289). A feed is also supplied through the header joint (C289) to the instrument pack main beam...
Page 32
CIRCUIT OPERATION 26DEFENDER 90 NASEXTERIOR LAMPS - Lights On Alarm DESCRIPTION If the side lights are switched on when the ignition is in the off position, opening either the drivers door or passengers door will cause the lights on alarm to sound. OPERATION Feed from the positive battery terminal is connected to the engine compartment fuse box (C632-1) by a brown wire. Current passes through fusible link 1 and fusible link 5 of the engine compartment fuse box which are connected in series....
Page 33
CIRCUIT OPERATION DEFENDER 90 NAS27INDICATORS / HAZARD WARNING LIGHTS DESCRIPTION The indicators are controlled from the steering column switch and operate when the ignition switch is in position II. Moving the column switch for a left turn causes the left hand indicator lights to flash. Moving the column switch for a right turn causes the right hand indicators to flash. The hazard light switch is located towards the center of the dash panel. Hazard operation is not dependent on the position of...
Page 34
CIRCUIT OPERATION 28DEFENDER 90 NASRight turn Moving the column switch to the right turn position allows power to flow through the switch (C36-2) to the trailer connector (C499-3), the RH rear direction indicator light (C402-2), RH front direction indicator light (C2-1) and instrument pack RH indicator warning light (C230-9) on green/white wires. The flasher unit (C547-30) is connected to the instrument pack trailer warning light (C233-1) by the light green purple wire. All lights are grounded on...
Page 35
CIRCUIT OPERATION DEFENDER 90 NAS29INTERIOR LAMPS DESCRIPTION Two interior lamps are provided, one in the front and one in the rear of the vehicle. The front interior light can be switched on manually using its integral switch. If either front door is or tail door is opened, both lights are illuminated. The lights are controlled by the multi-function ECU. The ECU contains a time out feature which switches off the interior lights after a specified time period if either of the doors is left open,...
Page 36
CIRCUIT OPERATION 30DEFENDER 90 NASINTERIOR ILLUMINATION DESCRIPTION The automatic gearbox selector is illuminated when the ignition switch is in position II. When the side lights are switched on, the interior controls and gauges are illuminated so that they can be easily located during night driving, the gearbox selector illumination is dimmed to prevent dazzling. Two levels of illumination, high and low, can be selected using the dimmer switch. OPERATION Feed from the positive battery terminal...
Page 37
CIRCUIT OPERATION DEFENDER 90 NASREV: 9/9731Power from the dimmer circuit flows through the following on red/white wires; · Left hand heater control illumination (C942-1). · Tachometer illumination (C936-1). · Speedometer illumination (C932-1). · Fuel gauge illumination (C935-1). · Right hand heater control illumination (C941-1). · Coolant temperature gauge illumination (C943-1). · Cigar lighter illumination (C74-1). · HRW switch illumination (C947-7). · Rear wiper switch illumination (C79-7)....
Page 38
CIRCUIT OPERATION 32DEFENDER 90 NASREV: 9/97INSTRUMENTS DESCRIPTION The vehicle relays information to the driver via the instrument pack. The instrument pack contains lights and analogue gauges. The color of the light denotes the severity of the information, warning lights are red, caution lights are orange, green and blue lights indicate that a system is operating. The analogue gauges relay information to the driver such as engine speed and engine temperature. OPERATION Feed from the...
Page 39
CIRCUIT OPERATION DEFENDER 90 NASREV: 9/9733· Brake/system warning light - grounded (C230-6) on the white/yellow wire, via a header joint (C285), through the handbrake switch (C91-1) or brake fluid level switch (C26-1). Illuminates with the ignition in position II and the handbrake applied or when the brake fluid level drops below minimum. As a bulb check, in the event of the handbrake not being applied, the lamp will illuminate for 3 seconds after the ignition is first turned on. This function is served...
Page 40
CIRCUIT OPERATION 34DEFENDER 90 NASREV: 9/97With the lighting switch in the on position, power flows across the switch (C41-2) to fuse 12 of the passenger compartment fuse box (C581-1) on the red wire. Fuse 12 of the passenger compartment fuse box supplies the instrument pack sidelights warning light (C233-3) on the red/orange wire. The warning light is grounded (C233-2) on a black wire. The instrument pack LH indicator warning light operates when the hazard warning switch is operated or when the...