Land Rover C42 In Car Entertainment 2nd Edition Rover Manual

							Security Code
18
ENTERING THE SECURITY CODE
If power to the audio unit has been interrupted 
(car battery disconnected, for example), the code 
MUST be entered before the set will operate. 
Enter the code as follows:
•Switch on the radio (‘CODE’ appears in the 
display). Press pre-set button 1 (arrowed in 
illustration).
•Press either the up or down tuning button (6) 
until the first digit of the security code 
appears in the display. Press pre-set 1 to 
store the first digit in the units memory.
•Use either tuning button to select the second 
digit of the code (until the correct digit 
appears in the display). Press pre-set 1 to 
store the second digit.
•Select the third digit, again using the tuning 
buttons (until the correct digit is displayed). 
Press pre-set 1 to store the third digit.
•Select the final digit (the display now shows 
the full four digit code). Press pre-set 1 to 
store the final digit.
If the correct code has been selected the radio 
will commence operating immediately.NOTE: If an incorrect code has been entered, the 
first time delay period commences. During the 
delay period, ‘CODE WAIT’ appears in the display 
- DO NOT switch off. At the end of the delay 
period, ‘CODE’ reappears in the display and you 
can then enter the correct code. Remember; the 
time delay period doubles each time an incorrect 
code is entered.
6ICE0214