LaCie 320 Users Manual

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
TagMenu titleExplanation
Tag7UniformityThis function electronically compensates for the slight variations in the white 
uniformity level as well as for deviations in color that may occur throughout the 
display area of the screen. These variations are characteristic of LCD panel tech-
nology. This function improves the color and evens out the luminance uniformity 
of the display.
NOTE: Using the UNIFORMITY feature does...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
TagMenu titleExplanation
Tag8OSD Lock OutThis control completely locks out access to all OSD control functions. When attempt-
ing to activate OSD controls while in the Lock Out mode, a screen will appear indi-
cating the OSD controls are locked out.  There are three types of OSD LOCK OUT:
OSD LOCK OUT with BRIGHTNESS and CONTRAST control: To activate 
the OSD Lock Out function, press SELECT, then UP  button and hold...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
TagMenu titleExplanation
Tag9Screen SaverUser the Screen Saver to reduce the risk of image persistance.
MOTION (default: OFF): Screen image is reduced to 95% size and moves peri-
odically in four directions to reduce the risk of image retention.  Screen image can 
be set to move periodically in intervals f rom 10 to 900 seconds in 10 increments.
GAMMA (default: OFF): When OFF, the GAMMA selection that is used by the...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
TagMenu titleExplanation
TagATilingTiling demonstrates multiple screens. This feature provides a single large screen 
using up to 25 monitors. It will be able to divide up to 5 each H and V.
This requires you to feed the PC output into each of the monitors through a 
distributor.
ENABLE: Select “ON”, the monitor will expand the selected position.
H MONITORS: Select number of horizontal divide.
V MONITORS: Select number...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
4.10. Using the Auto Brightness Function
The brightness of the LCD screen can be set to in-
crease or decrease depending on the amount of ambient 
light in the room. If the room is bright, the monitor be-
comes correspondingly bright. If the room is dim, then 
the  monitor  will  dim  accordingly.  The  purpose  of  this 
function  is  to  make  the  viewing  experience  more  com-
fortable to the eye in a variety of...

LaCie 300 Series LCD Monitor
User Manualpage 
When  the  AUTO  BRIGHTNESS  function  is  en-
abled the Brightness level of the screen changes automati-
cally according to the lighting conditions of the room (Fig-
ure D).
Figure D
BRIGHTNESS level set
for the monitor to use
when ambient lighting
level is low.
dark 
room bright condition  bright
Screen Brightness value by Auto Brightness function
BRIGHTNESS range
BRIGHTNESS level set for the
monitor to use when ambient
lighting level is high....

LaCie 300 Series LCD Monitor
User Manualpage 
Troubleshooting
5. Troubleshooting
In  the  event  that  your  LaCie  300  Series  LCD 
Monitor  is  not  working  correctly,  please  refer  to 
the  following  checklist  to  find  out  where  the  prob-
lem  is  coming  f rom.  If  you  have  gone  through  all 
of  the  points  on  the  checklist  and  your  monitor  is 
still  not  working  correctly,  please  have  a  look  at  the 
FAQs  that  are  regularly  published  on  our  website  –...

LaCie 300 Series LCD Monitor
User Manualpage 
ProblemQuestion
Image persistence.Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Im-
age persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. 
Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being 
displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor 
for as...

LaCie 300 Series LCD Monitor
User Manualpage 
Contacting Customer Suppor t
6. Contacting Customer Support
Read the User Manual and review the Troubleshoot-
ing section.
If  your  question  is  related  to  monitor  calibration, 
please refer to the Troubleshooting section of the LaCie 
blue  eye  pro  User  Manual.  Launch  the  LaCie  blue  eye 
pro  application  and  in  the  “About”  section  verify  that 
your  monitor  is  plugged  in  via  the  DVI  connection. 
Then perform a monitor...

LaCie 300 Series LCD Monitor
User Manualpage 0
Contacting Customer Suppor t
6.1. LaCie Technical Support Contacts
LaCie Asia, Singapore, and Hong Kong 
Contact us at: 
http://www.lacie.com/asia/contact/
LaCie Australia 
Contact us at: 
http://www.lacie.com/au/contact/
LaCie Belgium 
Contact us at: 
http://www.lacie.com/be/contact/ (Français)
LaCie Canada 
Contact us at: 
http://www.lacie.com/caen/contact/ (English)
LaCie Denmark 
Contact us at: 
http://www.lacie.com/dk/contact
LaCie Finland...