Kyocera KM C3232 User Manual

Troubleshooting
6-25
2Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
3Open duplex unit A1. 
4Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
5Open fixing unit cover A2.
6Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
Caution: The fixing unit of this product is extremely hot. Take sufficient care when 
working in this area, as there is a danger of getting burned.
Downloaded From...

Troubleshooting
6-26
7If jammed paper can be seen around the eject section, 
remove by pulling toward you. 
8Close fixing unit A2, duplex unit A1 and left cover 1. 
Document Processor (option)
Follow the steps as below to clear paper 
jams in the document processor.
1Remove any originals on the original table. 
2Open the document processor cover.
3Remove the jammed paper.
Paper misfeed.
3.Tur n the l eft di al.
4.Remove the or igi nal.
5.Close the document processor top cov
e
2.Hold up the reverse unit....

Troubleshooting
6-27
If the original cannot be easily removed, turn the feed 
knob. The original will move to a more easily 
accessible location. 
If the original tears, remove any loose scraps from 
inside the machine. 
4Lift up the reverse unit.
5Remove the jammed paper.
If the original tears, remove any loose scraps from 
inside the machine. 
6Return the reverse unit to its original position and close the document processor cover.
7Replace the originals into the original table. 
Document Finisher...

Troubleshooting
6-28
Downloaded From ManualsPrinter.com Manuals 

Appendix-1
Appendix
This section explains the specifications of this device. 
• Body...Appendix-2
• Copying Performance...Appendix-3
• Printing Performance...Appendix-3
• Scanning Performance...Appendix-4
• Document Processor (option)...Appendix-4
• Paper Feeder (option)...Appendix-5
• 3000 Sheet Paper Feeder (option)...Appendix-5
• Document Finisher (option)...Appendix-5
• 3000 Sheet Document Finisher (option)...Appendix-6
• Job Separator (option)...Appendix-6
• Environmental...

Appendix
Appendix-2
Specifications
NOTE: These specifications are subject to change without notice.
Body
Copying System Dry static transfer copy system (Laser), Tandem drum system
Supported Original Types Sheet, Book, 3-dimensional objects (maximum original size: 
11 × 1 7  / A 3
Copy Sizes
Cassette 1, 2
MP Tray
During Duplex Usage
Non-Copying Margin11 × 1 7  ,  8
1/2×14, 11×81/2, 81/2×11, 51/2×81/2, 81/2× 13, 
8
1/2×131/2, A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8K, 16K, 16KR
11 × 1 7   -  5
1/2×81/2, A3...

Appendix
Appendix-3
Copying Performance
Printing Performance
Copying Speed
25/20 ppm model
32/25 ppm model
32/32 ppm modelColor copy
11 × 17/A3: 10 sheets/min
8
1/2× 14/B4: 10 sheets/min
11 × 8
1/2/A4: 20 sheets/min
8
1/2× 11/A4R: 14 sheets/min
B5: 20 sheets/min
B5R: 14 sheets/min
Color copy
11 × 17/A3: 13 sheets/min
8
1/2× 14/B4: 13 sheets/min
11 × 8
1/2/A4: 25 sheets/min
8
1/2× 11/A4R: 17 sheets/min
B5: 25 sheets/min
B5R: 17 sheets/min
Color copy
11 × 17/A3: 16 sheets/min
8
1/2× 14/B4: 16 sheets/min
11...

Appendix
Appendix-4
Scanning Performance
Document Processor (option)
Hardware IBM PC/AT Compatible
Supported Operating 
SystemsWindows 95 OSR2, Windows 98 Second Edition, 
Windows NT 4.0 Service Pack 5 or later, 
Windows 2000 Service Pack 2 or later, Windows Me, Windows XP, 
Windows Server 2003, Mac OS 9.1-9.2.2, Mac OS 10.1.5-10.4 
(TWAIN: Mac OS 10.2-10.4)
Operating Environment CPU Pentium 133 MHz or higher (Windows Me 150 MHz or 
higher, Windows XP Celeron 600 MHz or higher, 
Macintosh Power PC G3 or...

Appendix
Appendix-5
Paper Feeder (option)
3000 Sheet Paper Feeder (option)
Document Finisher (option)
NOTE: When using the document finisher or 3000 sheet document finisher, the optional job 
separator must be installed.
Only paper that can be fed from the cassette can be ejected from the document finisher or 3000 
sheet document finisher. Paper Supply Method Friction Feed (No. Sheets: 500, 80 g/m
2, 2 cassettes)
Paper Size 11 × 17, 8
1/2×14, 11×81/2, 81/2×11, 101/2×71/4, 71/4×101/2, 
5
1/2×81/2,...

Appendix
Appendix-6
3000 Sheet Document Finisher (option)
NOTE: When using the document finisher or 3000 sheet document finisher, the optional job 
separator must be installed.
Only paper that can be fed from the cassette can be ejected from the document finisher or 3000 
sheet document finisher.
Job Separator (option)
Number of Trays 3 tray
Paper Size
Tray A (Non-stapling)
Tray B
Tray C11 × 1 7  ,  8
1/2× 14 A3, B4, 8K: 1500 sheets
11 × 8
1/2, 81/2× 11, A4, A4R, B5, Folio, 16K: 3000 sheets
11 × 1 7  ,...