Kyocera KM 4800w User Manual

							 10 8.  Confirm that “KM-4800w TCP/IP Port” is displayed in the list. Click “Close”. 
 
 
 
Adding “KM-4800w TCP/IP Port” is completed. 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 11
1.3. Add Printer 
 
1.  In “Devices and Printers”, click “Add a printer”. 
 
 
2.  Choose “Add a local printer”. 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 12 3.  Choose “Use an existing port:” and then select “KM-4800w:192.168.100.10 (KM-
4800w TCP/IP Port)” in the pull down menu. Click “Next”. 
 
 
4. Click “Have Disk”. 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 13 5. Click “Browse”. 
 
 
6.  Specify “K48PREN.INF” at “(the optical drive)\Software\PrinterDriver\EN\” 
Click “Open”. 
English: specify \Software\PrinterDriver\EN\ K48PREN.INF 
French: specify \Software\PrinterDriver\FR\ K48PRFR.INF 
German: specify \Software\PrinterDriver\DE\ K48PRDE.INF 
Italian: specify \Software\PrinterDriver\IT\ K48PRIT.INF 
Spanish: specify \Software\PrinterDriver\ES K48PRES.INF 
 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 14 7. Click “OK”. 
 
 
8. Click “Next”. 
 
  
Downloaded From ManualsPrinter.com Manuals 
						

							 15 9.  If KM-4800w Printer Driver is already installed on your system, the following screen 
appears. 
Select “Replace the current driver” and click “Next”. 
 
 
10. Printer name can be changed at your option.  
Click “Next”. 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 16 11. Check “Always trust software from “KYOCERA MITA Corporation”.” and click “Install”. 
 
 
12. Click  “Finish”. 
 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 17 13. Confirm that “KM-4800wEN” is added in “Printers and Faxes”. 
 
 
 
Installation of printer has been finished. 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 18
1.4.  About Printer Port 
 
In “Devices and Printers”, select “KM-4800wEN” and click “Print server properties”. 
 
 
Open “Ports” and then click “Change Port Settings”. 
 
Downloaded From ManualsPrinter.com Manuals 
						

							 19 Select “KM-4800w TCP/IP Port” and then click “Configure Port”. 
 
 
The following information is indicated. 
 
You do not have to change any of the above settings in usual case. 
Change these settings when KM-4800w does not wake up correctly from the Power 
Save Mode caused by the network settings. 
 
MAC Address: MAC Address of output printer 
Broad Cast Address: An address used to send the data to all PC on the network 
Magic Boot Port: Port number to send the data 
Timeout: Timeout when no response comes from the output printer 
Retry: Number of retry when no response comes from the output printer 
Downloaded From ManualsPrinter.com Manuals