Kyocera KM 4800w User Manual

 20
1.5.  About reinstall of Printer 
 
In “Devices and Printers”, select a KM-4800wEN you want to remove and then right click 
“Remove device”. 
 
 
Click “Yes”. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 21 In “Devices and Printers”, click “Fax” icon and then click “Print server properties”. 
 
 
Open “Drivers” and then click “Change Driver Settings”. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 22 Select “KM-4800wEN” and then click “Remove”. 
 
 
Select “Remove driver and driver package” and click “OK”. 
 
 
Click “Yes”. 
 
Downloaded From ManualsPrinter.com Manuals 

 23 Click “Delete”. 
 
 
Click “OK”. 
If the removal of the driver is failed, reboot the PC, and then try to remove the driver 
again. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 24 Click “Close”. 
 
 
 
Now the system is ready to be reinstalled KM-4800wEN. 
Downloaded From ManualsPrinter.com Manuals 

 25
2. Setting item of Printer Driver 
If the setup conditions of the application is not correct, documents may not be printed 
properly. 
 
Point “Start Menu” and click “Devices and Printers”. 
 
Select the printer you have installed by right clicking, and then open “Printing 
Preferences”. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 26 Each setting item in “General Setting” Tab is explained in below. 
 
 
 
 
 
Specify the size of paper used for printing. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 27 If “Custom Size” is selected in the above setting, the following dialog is indicated. 
A paper size can be specified at your option within the following range. 
Width:  100 mm to 914.4 mm 
Height: 100 mm to 10000 mm 
 
 
If “Fit Page” is selected with checking “Scaling”, the printing image is automatically 
enlarged or reduced just to fit the paper size selected on “Output Paper”. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 28 If “Percent” is selected with checking “Scaling”, the printing image is enlarged or 
reduced according the value specified on “Magnification”. 
Available setting range for Magnification is from 20 to 500%. 
 
 
 
Orientation of paper can be selected. 
The printing image is rotated in a 180 degrees arc revolution against the paper. 
 
 
Number of prints can be specified ranging from 1 to 999. 
Checking “Collate” enables to print sets with collating. 
 
 
Downloaded From ManualsPrinter.com Manuals 

 29 Each setting item in “Output Setting” Tab is explained in below. 
 
 
 
 
The source of paper can be selected. 
 
 
The type of printing media can be selected. 
 
 
Multiple images can be printed on 1 sheet of printing media. 
16 images is the maximum number of images available to print on 1 sheet of printing 
media. 
 
 
Printing resolution can be specified ranging 300 and 600dpi. 
 
 
A mirror image can be printed when ON. 
 
 
A negative image can be printed when ON. 
 
Downloaded From...