Kyocera KM 3050 User Manual

							Legal and Safety Information 
OPERATION GUIDEix
Installation Precautions
Environment
CAUTION
Avoid placing the machine on or in locations which are unstable 
or not level. Such locations may cause the machine fall down or 
fall over. This type of situation presents a danger of personal 
injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt 
become attached to the power plug, clean the plug to avoid the 
danger of fire or electrical shock.
Avoid locations near radiators, heaters or other heat sources, or 
locations near flammable items to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and 
maintenance, allow access space as shown below. Leave 
adequate space, especially around the rear cover, to allow air to 
be properly ventilated out of the machine.
Other precautions
Adverse environment conditions may affect the safe operation and 
performance of the machine. Install in an air-conditioned room and avoid 
the following locations when selecting a site for the machine.
• Avoid locations near a window or with exposure to direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
1113/16
30 cm1113/16
30 cm
393/8
100 cm
315/16
10 cm
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
xOPERATION GUIDE If the floor is delicate against casters, when this machine is moved after 
installation, the floor material may be damaged.
During copying, some ozone is released, but the amount does not cause 
any ill effect to ones health. If, however, the machine is used over a long 
period of time in a poorly ventilated room or when making an extremely 
large number of copies, the smell may become unpleasant. To maintain 
the appropriate environment for copy work, it is suggested that the room 
be properly ventilated.
Power supply/Grounding the machine
WARNING
Do not use a power supply with a voltage other than that 
specified. Avoid multiple connections in the same outlet. These 
types of situations present a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects 
come into contact with the prongs on the plug, it may cause a fire 
or electric shock.
Always connect the machine to an outlet with a ground 
connection to avoid the danger of fire or electrical shock in case 
of an electric short. If an earth connection is not possible, contact 
your service representative.
Other precautions
Connect the power plug to the closest outlet possible to the machine.
Handling of plastic bags
WARNING
Keep the plastic bags that are used with the machine away from 
children. The plastic may cling to their nose and mouth causing 
suffocation.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
OPERATION GUIDExi
Precautions for Use
Cautions when using the machine
WARNING
Do not place metallic objects or containers with water (flower 
vases, flower pots, cups, etc.) on or near the machine. This type 
of situation presents a danger of fire or electrical shock should 
they fall inside.
Do not remove any of the covers from the machine as there is a 
danger of electrical shock from high voltage parts inside the 
machine.
Do not damage, break or attempt to repair the power cord. Do not 
place heavy objects on the cord, pull it unnecessarily or cause 
any other type of damage. These types of situations present a 
danger of fire or electrical shock.
Never attempt to repair or disassemble the machine or its parts 
as there is a danger of fire, electrical shock or exposure to the 
laser. If the laser beam escapes, there is a danger of it causing 
blindness.
If the machine becomes excessively hot, smoke appears from 
the machine, there is an odd smell, or any other abnormal 
situation occurs, there is a danger of fire or electrical shock. Turn 
the main power switch off immediately, be absolutely certain to 
remove the power plug from the outlet and then contact your 
service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into 
the machine, turn the main power switch off immediately. Next, 
be absolutely certain to remove the power plug from the outlet to 
avoid the danger of fire or electrical shock. Then contact your 
service representative.
Do not remove or connect the power plug with wet hands, as 
there is a danger of electrical shock.
Always contact your service representative for maintenance or 
repair of internal parts.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
xiiOPERATION GUIDE
CAUTION
Do not pull the power cord when removing it from the outlet. If the 
power cord is pulled, the wires may become broken and there is 
a danger of fire or electrical shock. (Always grasp the power plug 
when removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the 
machine. If the power cord is damaged, there is a danger of fire 
or electrical shock.
Always hold the designated parts only when lifting or moving the 
machine.
For safety purposes, always remove the power plug from the 
outlet when performing cleaning operations.
If dust accumulates within the machine, there is a danger of fire 
or other trouble. It is therefore recommended that you consult 
with your service representative in regard to cleaning of internal 
parts. This is particularly effective if accomplished prior to 
seasons of high humidity. Consult with your service 
representative in regard to the cost of cleaning the internal parts of the 
machine.
Other precautions
Do not place heavy objects on the machine or cause other damage to the 
machine.
During the use, do not
• Open the front cover,
• Turn off the main power switch,
• Pull out the power plug.
When lifting or moving the machine, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. 
They could be damaged by static electricity.
Do not attempt to perform any operations not explained in this guide.
Do not look directly at the light from the scanning lamp as it may cause your 
eyes to feel tired or painful.
This machine comes equipped with an HDD (hard disk drive). Do not 
attempt to move the machine while the power is still on. Since any resulting 
shock or vibration may cause damage to the hard disk, be sure to turn off 
the power before attempting to move the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
OPERATION GUIDExiii
Cautions when handling consumables
CAUTION
Do not attempt to incinerate the toner container or the waste 
toner box. Dangerous sparks may cause burns.
Keep the toner container and the waste toner box out of the 
reach of children.
If toner happens to spill from the toner container or the waste 
toner box, avoid inhalation and ingestion, as well as contact with 
your eyes and skin.
• If you do happen to inhale toner, move to a place with fresh 
air and gargle thoroughly with a large amount of water. If coughing 
develops, contact a physician.
• If you do happen to ingest toner, rinse your mouth with water and drink 
1 or 2 cups of water to dilute the contents of your stomach. If 
necessary, contact a physician.
• If you do happen to get toner in your eyes, flush them thoroughly with 
water. If there is any remaining tenderness, contact a physician.
• If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the toner container or the 
waste toner box.
If the optional Fax kit is installed and the main power switch is off, 
transmitting/receiving Fax is disabled. Do not turn off the main power 
switch, but press the Power key on the operation panel to enter Sleep 
mode.
Other precautions
Return the exhausted toner container and waste toner box to your dealer 
or service representative. The collected toner container and waste toner 
box will be recycled or disposed in accordance with the relevant 
regulations.
Store the machine while avoiding exposure to direct sunlight.
Store the machine in a place where the temperature stays below 40ºC 
while avoiding sharp changes of temperature and humidity.
If the machine will not be used for an extended period of time, remove the 
paper from the cassette and the Multi Purpose (MP) Tray, return it to its 
original package and reseal it.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
xivOPERATION GUIDE
Laser Safety
Laser radiation could be hazardous to the human body. For this reason, laser 
radiation emitted inside this machine is hermetically sealed within the protective 
housing and external cover. In the normal operation of the product by user, no 
radiation can leak from the machine.
This machine is classified as Class 1 laser product under IEC 60825.
Caution: Performance of procedures other than those specified in this manual 
may result in hazardous radiation exposure.
These labels are attached to the laser scanner unit inside the machine and are not 
in a user access area.
The label shown below is attached on the right side of the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
OPERATION GUIDExv
Safety Instructions Regarding the Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on the 
equipment are only functional switches and are not suitable for isolating the 
equipment from the power source.
VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter 
auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, 
um den Stromfluß im Gerät zu unterbrechen.
DECLARATION OF CONFORMITY
TO
89/336/EEC, 73/23/EEC, 93/68/EEC and 1995/5/EC
Radio Frequency Transmitter
This machine contains the transmitter module. We, the manufacturer hereby 
declare that this equipment is in compliance with the essential requirements and 
other relevant provisions of Directive 1999/5/EC.
Radio Tag Technology
In some countries the radio tag technology used in this equipment to 
identify the toner container may be subject to authorization and the use of 
this equipment may consequently be restricted.
We declare under our sole responsibility that the product to which this 
declaration relates is in conformity with the following specifications.
EN55024
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN60950
EN60825-1
EN300330-1
EN300330-2
Downloaded From ManualsPrinter.com Manuals 
						

							Legal and Safety Information 
xviOPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDExvii
About this Operation Guide
This Operation Guide contains the following chapters.
Chapter 1 - Part Names
Identifies machine parts and operation panel keys.
Chapter 2 - Preparation before Use
Explains adding paper, placing original, connecting the machine, and 
necessary configurations before first use.
Chapter 3 - Basic Operation
Describes the procedures for basic copying, printing and scanning.
Chapter 4 - Optional Equipment
Introduces the convenient optional equipment available for this machine.
Chapter 5 - Maintenance
Describes cleaning and toner replacement.
Chapter 6 - Troubleshooting
Explains how to handle error messages, paper jams and other problems.
Appendix
Explains how to enter characters, and lists the machine specifications.
Downloaded From ManualsPrinter.com Manuals 
						

							About this Operation Guide 
xviiiOPERATION GUIDE
Included Guides
The following guides are supplied with the machine. Refer to them as 
necessary.
Operation Guide (This Guide)
Describes how to load paper, basic copy, print and scan operations, and 
troubleshooting.
Advanced Operation Guide
Explains copying, printing and scanning features in depth, as well as 
default settings.
Conventions in This Guide
The following conventions are used depending on the nature of the 
description.
Convention Description Example
BoldIndicates the operation panel 
key or a computer screen.Press the Start key.
[Regular] Indicates the touch panel keys. Press [OK].
ItalicIndicates the message 
displayed on the touch panel.Ready to copy is displayed.
Used to emphasize a key word, 
phrase or references to 
additional information.For more information refer to Sleep and 
Auto Sleep on page 3-4.
NoteIndicates supplemental 
information or operations for 
reference.
NOTE: 
ImportantIndicates items that are required 
or prohibited so as to avoid 
problems.
IMPORTANT: 
CautionIndicates what must be 
observed to prevent injury or 
machine breakdown and how to 
deal with it.
CAUTION: 
Downloaded From ManualsPrinter.com Manuals