Kyocera FS 2020DN User Manual

x
Compliance and Conformity
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no...

xi
Safety Infor mation
Laser Safety
This printer is certified as a Class 1 laser product under the U.S. 
Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to Radiation Control for Health and 
Safety Act of 1968. This means that the printer does not produce 
hazardous laser radiation. Since radiation emitted inside the printer is 
completely confined within protective housings and external covers, the 
laser beam cannot escape from the printer during any phase of...

xii
Caution Labels
The printer bears any of the following labels.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. 
Food and Drug Administration implemented regulations for laser 
products on August 2, 1976. These regulations apply to laser products 
manufactured after August 1, 1976. Compliance is mandatory for 
products marketed in the United States. A label indicating compliance 
with the CDRH regulations must be attached to laser products marketed 
in the United...

xiii
Safety Instructions Regarding the 
Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on 
the equipment are only functional switches and are not suitable for 
isolating the equipment from the power source.
VORSICHT:  Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen 
Schalter auf dem Gerät sind nur Funktionsschalter und können nicht 
verwendet werden, um den Stromfluß im Gerät zu unterbrechen.
DECLARATION OF CONFORMITY TO
2004/108/EC, 2006/95/EEC,...

xiv
Kyocera Mita Australia Pty., Ltd.
6-10 Talavera Road, North Ryde, NSW 2113, Australia
Telephone: +61 2-9888-9999
Fax: +61 2-9888-9588
Canadian Department of Communications 
Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformité aux normes du ministere 
des Communications du Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
EN ISO 7779
Maschinenlärminformations-Verordnung 3. GPSGV, 06.01.2004: Der 
höchste...

xv
Energy Star (ENERGY STA R®) Program 
We have determined as a participating company in the International 
Energy Star Program that this product is compliant with the standards 
laid out in the International Energy Star Program.
Downloaded From ManualsPrinter.com Manuals 

xvi
Symbols
The sections of this guide and parts of the machine marked with symbols 
are safety warnings meant to protect the user, other individuals and 
surrounding objects, and ensure correct and safe usage of the machine. 
The symbols and their meanings are indicated below.
The following symbols indicate that the related section includes safety 
warnings. Specific points of attention are indicated inside the symbol.
The following symbols indicate that the related section includes 
information on...

xvii
Installation Precautions
Environment
Caution
Avoid placing the machine on or in locations which are unstable 
or not level. Such locations may cause the machine to fall down 
or fall over. This type of situation presents a danger of personal 
injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt 
become attached to the power plug, clean the plug to avoid the 
danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat...

xviii
Power Supply/Grounding the Machine
Warning
Do not use a power supply with a voltage other than that 
specified. Avoid multiple connections in the same outlet. These 
types of situations present a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects 
come in contact with the prongs on the plug, it may cause a fire or 
electric shock.
Always connect the machine to an outlet with a ground 
connection to avoid the danger of fire or electrical shock in...

Introduction-xix
Precautions for Use
Cautions when using the machine
Warning
Do not place metallic objects or containers with water (flower 
vases, flower pots, cups, etc.) on or near the machine. This 
situation presents a danger of fire or electrical shock should they 
fall inside. 
Do not remove any of the covers from the machine as there is a 
danger of electrical shock from high voltage parts inside the 
machine.
Do not damage, break or attempt to repair the power cord. Do not 
place heavy objects...