Kyocera FS 1300D User Manual

Introduction-xix
About the Operation Guide
This Operation Guide contains the following chapters:
1 Machine Parts
This chapter explains the names of parts.
2 Loading Paper
This chapter explains paper specifications for this printer and how to 
load paper into the cassette or MP tray.
3Printing
This chapter explains how to install the printer driver, print from your PC, 
and use the application software included in the CD-ROM. 
4 Maintenance
This chapter explains how to replace the toner container and how...

Introduction-xx
Conventions in This Guide
This manual uses the following conventions.
Convention
Description Example
Italic 
TypefaceUsed to emphasize a key word, 
phrase or reference to additional 
information. Load the paper in the 
cassette.
Refer to  Configuration Tool  on page 3-9.
Bold Used to denote buttons on the 
software. To start printing, click 
OK.
Braket Bold Used to denote operation panel 
keys.
Printing resumes when the  [GO] is 
pressed.
Note Used to provide additional or 
useful...

Machine Parts1-1
1 Machine Par ts
This chapter identifies machine parts, indicators, and operation panel 
keys.
Components at the Front of the Printer1-2
Components at the Rear of the Printer 1-3
Operation Panel 1-4
Indicators 1-5
Keys 1-6
Downloaded From ManualsPrinter.com Manuals 

1-2Machine Parts
Components at the Front of  the Printer
1Top Cover
2 Paper Stopper
3 Top Tray
4 Operation Panel
5 Right Cover
6 Paper Cassette
7 Front Cover
8 Manual Feed
9 MP Tray
10 Subtray
FS-1100
123
4
5
6
7
9
FS-1300D
10
12
3
4
5
6
7
8
Downloaded From ManualsPrinter.com Manuals 

Machine Parts1-3
Components at the Rear of the Printer
11Optional Interface Slot Cover
12 USB Interface Connector
13 Rear Cover
14 Power Cord Connector
15 Power Switch
11
14
12
15
13
Downloaded From ManualsPrinter.com Manuals 

1-4Machine Parts
Operation Panel
1 Ready Indicator
2 Attention  Indicator
3 Toner  Indicator
4Data  Indicator
5 Paper  Indicator
6 Jam  Indicator
7 [Cancel]  Key
8[GO]  Key
2
1
3
4
5
6
78
Downloaded From ManualsPrinter.com Manuals 

Machine Parts1-5
Indicators
There are six indicators located on the top right of the printer. The 
indicators are used to identify the status of the printer at any time. To 
identify the printer status, check the indicators on the printer and then 
refer to the table below.
Indicator StatusMeaning
Ready (Green) Lit
Indicates online status (printing is possible).
Fast FlashingOffline status. You cannot print, but the printer can receive data. 
Slow FlashingThe printer is in sleep mode.
OffThe printer has...

1-6Machine Parts
Keys
Refer to the following table for the name and description of the basic 
functions of each key.
Key Status Operation Function
Cancel - Press for 1 second or more
Cancels the data from the PC
GO At Ready Press momentarilySwitches On-line/Off-line
Press for 3 to 9 secondsPrints the status page.
Press for 10 seconds or morePrints the service status page.
At ErrorPress momentarilyClears the error.
Paper Empty Press momentarilyResumes printing by switching 
automatically to an available...

Loading Paper2-1
2 Loading Paper
This chapter explains paper specifications for this printer and how to 
load paper into the cassette or MP tray
.
Paper Specifications 2-2
Preparing the Paper 2-11
Loading Paper into Cassette 2-11
Loading Paper into MP (Multi-Purpose)Tray 2-14
Downloaded From ManualsPrinter.com Manuals 

2-2Loading Paper
General Guidelines
The machine is designed to print on standard copier paper, but it can 
also accept a variety of other types of paper within the limits specified 
below.
Selection of the right paper is important. Using the wrong paper can 
result in paper jams, curling, poor print quality, and paper waste, and in 
extreme cases can damage the machine. The guidelines given below 
will increase the productivity of your office by ensuring efficient, trouble-
free printing and reducing...