Kyocera FS 1120D User Manual

							Connecting and Printing3-17
Others Tab
The Others tab enables you to configure the printer settings  shown 
below.
Item Description
Auto sleep Configures the amount of time when the printer 
automatically enters Sleep Mode. Click  Advanced to 
turn Auto sleep On  or Off . 
EcoFuser Enables or disables the EcoFuser. Select  On to 
reduce the power consumption to a minimum by 
turning off the heater of the fixing unit at Sleep Mode. 
The default setting is  On.
Panel lock Locks or unlocks the operation panel. Locking the  operation panel disables key operations from the 
panel.
RAM disk Enables or disables RAM disk mode. Enabling the  RAM disk allows you to use it as a temporary 
storage area for data such as font files or the 
contents of the receive buffer. You can also specify 
the RAM disk size by clicking  Enable.
Downloaded From ManualsPrinter.com Manuals 
						

							3-18Connecting and Printing
Uninstalling Software (Windows PC)
The software can be uninstalled (removed) using the CD-ROM (Product 
Library) supplied with the printer.
1Exit all active software applications.
2Insert the enclosed CD-ROM (Product Library) into the CD-ROM 
drive. In Windows 7, Windows Server 2008 and Windows Vista, the 
user account control window may appear. Click Allow .
3Following the procedure used to install the printer driver, click 
Remove Software. The Kyocera Uninstaller wizard appears.
4Select the software package to remove.
5Click Uninstall. 
The uninstaller starts.
6When Uninstall complete screen appears, click  Finish.
7If Restart Your System screen appears, select whether you restart 
your computer or not, and click Finish .
Start the uninstaller by clicking start  > All Programs  > 
Kyocera  > Uninstall Kycoera Product Library , and uninstall 
the software.
IMPORTANT On Macintosh computers, because the printer settings 
are specified using a PPD (PostScript Printer Description) file, the 
software cannot be uninstalled using the CD-ROM (Product Library).
Note When KMnet Viewer is installed, separate uninstallers 
are launched for this application. Proceed with the 
uninstallation steps for this application as directed by the on-
screen instructions.
Note The software can be uninstalled from the Program 
menu.
Downloaded From ManualsPrinter.com Manuals 
						

							Maintenance4-1
4 Maintenance
This chapter explains how to replace the toner container and clean the 
printer
.
General Information 4-2
Toner Container Replacement 4-2
Maintenance Kit Replacement 4-5
Cleaning the Printer 4-6
Prolonged Non-Use and Moving of the Printer 4-9
Downloaded From ManualsPrinter.com Manuals 
						

							4-2Maintenance
General Information
This chapter describes basic maintenance tasks you can perform for the 
printer. You can replace the toner container according to the printers 
status:
Also, the internal parts need periodic cleaning.
Toner Container Replacement
The Toner indicator identifies the toner status at two stages of toner 
usage. 
•When the printer becomes low on toner, the Toner  indicator flashes. 
Note the replacement is not always necessary at this stage. 
• If you ignore the above status and continue printing, the  To n e r 
indicator lights up just before the toner is used up. The toner 
container must then be replaced immediately.
In either case, replace the toner container. 
Frequency of toner container replacement
Assuming an average toner coverage of 5% and EcoPrint mode turned 
off, the toner container  will need replacing approximately once every 
7,200 pages (FS-1320D) or 2,500 pages (FS-1120D).
Starter Toner Container
The toner container packed with the new printer is a starter toner 
container. The starter toner container  lasts an average of 2,300 pages 
(FS-1320D) or 1,000 pages (FS-1120D).
To n e r  K i ts
For best results, we recommend that you only use genuine Kyocera 
Parts and Supplies.
A new toner kit contains the following items:
• Toner Container
• Plastic waste bag for old toner container
• Installation Guide
Note Information Collection on Memory Chips - The memory chip 
attached to the toner container is designed to improve 
convenience for the end user; to support the recycling operation of 
empty toner containers; and to gather information to support new 
product planning and development. The information gathered is 
anonymous - it cannot be associated to any specific individual and 
the data is intended to be used anonymously. 
Note Do not remove the toner container from the carton until you 
are ready to install it in the printer. 
Downloaded From ManualsPrinter.com Manuals 
						

							Maintenance4-3
Replacing the Toner Container
This section explains how to replace the toner container.
1Open the top cover.
2Turn the lock lever to the unlock position. Push the lock lever to the 
position marked by the arrow and pull out the toner container.
CAUTION  Do not attempt to incinerate the Toner 
Container. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move 
storage media and computer supplies (such as floppy disks) away 
from the toner container. This is  to avoid damaging media by the 
magnetism of toner.
IMPORTANT Kyocera Mita Corporation is not liable against any 
damages or problems arising from  the use of toner containers other 
than those designated as original  Kyocera toner containers. For 
optimum performance, it is also recommended to use only the 
Kyocera toner containers which are specifically intended for use in 
your country or region. If the tone r container for another destinations 
is installed,  the printer will stop printing.
NoteYou do not have to turn printer power off before starting 
the replacement. Any data that may be processing in the printer 
will be deleted if you turn the printer power off
. 
Note Put the old toner container in the plastic bag (supplied 
with the new toner kit) and discard it later according to the local 
code or regulations for waste disposal.
Downloaded From ManualsPrinter.com Manuals 
						

							4-4Maintenance
3Take the new toner container out of the toner kit. Shake the new 
toner container at least 5 times as shown in the figure in order to 
distribute the toner evenly inside the container.
4Remove the label from the toner container.
5Install the new toner container in the printer. Push firmly on the top of 
the container at the positions marked PUSH, until you hear a click.
Downloaded From ManualsPrinter.com Manuals 
						

							Maintenance4-5
6Turn the lock lever to the lock position.
7Close the top cover.
Maintenance Kit Replacement
When the machine prints 100,000 pages, a message is printed indicating 
that the maintenance kit should be replaced. The maintenance kit must 
then be replaced immediately. 
To replace the maintenance kit, contact your service technician.
IMPORTANTWhen the waste toner in the drum unit is almost full, 
[Attention]  indicator and  [Toner] indicator are flashing. Replace the 
maintenance kit.
Downloaded From ManualsPrinter.com Manuals 
						

							4-6Maintenance
Cleaning the Printer
To avoid print quality problems, the interior of the printer must be 
cleaned with every toner container replacement.
1Open the top cover and front cover.
2Lift the developer unit together with the toner container out of the 
printer.
3Remove the drum unit from the printer by holding the green levers 
with both hands.
Developer 
Unit
Drum 
UnitNoteThe drum unit is sensitive to light. Never expose the 
drum unit to light for more than five minutes.
Downloaded From ManualsPrinter.com Manuals 
						

							Maintenance4-7
4Place the drum unit flat on a clean, level surface.
5Use a clean, lint free cloth to clean dust and dirt away from the metal 
registration roller.
6On the drum unit, slide the charger cleaner (green) back and forth 2 
or 3 times to clean the charger wire, then return it to its original 
position (CLEANER HOME POSITION ).
7When cleaning is complete, return the drum unit to the original 
position.
IMPORTANTDo not place the drum unit on end.
IMPORTANTTake care not to touch the transfer roller (black) 
during cleaning.
IMPORTANT Remove the fixing tape on the charger cleaner 
before cleaning for the first time.
After cleaning, make sure you restore the charger cleaner to its 
home position.
Downloaded From ManualsPrinter.com Manuals 
						

							4-8Maintenance
8Return the developer unit to its position, aligning the guides at both 
ends with the slots in the printer. Then, close the front cover and top 
cover.
Downloaded From ManualsPrinter.com Manuals