Home > Kyocera > Printer > Kyocera FS 1100N User Manual

Kyocera FS 1100N User Manual

Here you can view all the pages of manual Kyocera FS 1100N User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 61

Connecting and Printing3-17
Others Tab
The Others  tab enables you to configure the printer settings  shown 
below.
Item Description
Auto sleep Configures the amount of time when the printer  automatically enters Sleep Mode. Click  Advanced to 
turn  Auto sleep  On or Off. 
EcoFuser Enables or disables the  EcoFuser. Select On to 
reduce the power consumption to a minimum by 
turning off the heater of the fixing unit at  Sleep Mode. 
The default setting is  On.
Panel lock Locks or unlocks the operation...

Page 62

3-18Connecting and Printing
Uninstalling Software
The CD-ROM lets you remove the printer software.
1Click Remove Software . The Kyocera  Uninstall er appears.
2Select the software package to remove.
3Click Uninstall . 
The uninstaller starts.
4When Uninstall complete  screen appears, click Finish.
5Select whether you restart your computer or not, click  Finish.
NoteIn Windows Vista,  Remove Driver and Package  screen 
appears. Select Remove driver and driver package, and 
click  OK. 
Downloaded From...

Page 63

Maintenance4-1
4 Maintenance
This chapter explains how to replace the toner container and clean the 
printer
.
General Information 4-2
Toner Container Replacement 4-2
Cleaning the Printer 4-6
Prolonged Non-Use and Moving the Printer 4-9
Downloaded From ManualsPrinter.com Manuals 

Page 64

4-2Maintenance
General Information
This chapter describes basic maintenance tasks you can perform for the 
printer. You can replace the toner container according to the printers 
status:
Also, the internal parts need periodic cleaning.
Toner Container Replacement
The Toner indicator  identifies the toner status at two stages of toner 
usage. 
• When the printer becomes low on toner, the  Toner indicator flashes. 
Note the replacement is not always necessary at this stage. 
• If you ignore the above...

Page 65

Maintenance4-3
Replacing the Toner Container
This section explains how to replace the toner container.
1Open the top cover.
2Turn lock lever  to the unlock position. Push lock lever  to the position 
marked arrow and pull out the toner container .
CAUTION  Do not attempt to incinerate the Toner 
Container. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move 
storage media and computer supplies (such as floppy disks) away 
from the toner container. This is  to...

Page 66

4-4Maintenance
3Take the new toner container  out of the toner kit. Shake the new 
toner container  at least 5 times as shown in the figure in order to 
distribute the toner evenly inside the container.
4Remove the label from the  toner container.
5Install the new toner container  in the printer. Push firmly on the top of 
the container at the positions marked PUSH, until you hear a click.
Downloaded From ManualsPrinter.com Manuals 

Page 67

Maintenance4-5
6Turn lock lever  to the lock position.
7Close the top cover .
Downloaded From ManualsPrinter.com Manuals 

Page 68

4-6Maintenance
Cleaning the Printer
To avoid print quality problems, the interior of the printer must be 
cleaned with every toner container replacement.
1Open the top cover and front cover .
2Lift the process unit  together with the  toner container out of the 
printer.
3Remove the  drum unit from the printer by holding the  green levers 
with both hands.
Note The drum is sensitive to light. Never expose the  drum 
unit  to light for more than five minutes.
Downloaded From ManualsPrinter.com Manuals 

Page 69

Maintenance4-7
4Place the drum unit flat on a clean, level surface.
5Use a clean, lint free cloth to clean dust and dirt away from the metal 
registration roller .
6Slide the charger cleaner  (green) back and forth 2 or 3 times to clean 
the  charger wire , then return it to its original position (CLEANER 
HOME POSITION ).
7When cleaning is complete, return the drum unit  to the original 
position.
IMPORTANT Do not place the drum unit on end.
IMPORTANTTake care not to touch the  transfer roller (black)...

Page 70

4-8Maintenance
8Return the process unit  to its position, aligning the guides at both 
ends with the slots in the printer. Then, close the  front cover and top 
cover .
Downloaded From ManualsPrinter.com Manuals 
Start reading Kyocera FS 1100N User Manual

Related Manuals for Kyocera FS 1100N User Manual

All Kyocera manuals