Konica Minolta PagePro 4650EN User Manual

Configuration Menu Overview 41
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 2.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 98 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.87 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 42
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper 
loaded into Tray 2.
THICK 3 and THIN PAPER are 
selectable for pagepro 5650EN only.
SIZE 
SET-
TINGSettingsAUTO/USER SELECT
If AUTO is selected, the printer 
automatically detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size. 
TRAY 3 PAPER 
SIZESettingsLETTER/LEGAL/...

Configuration Menu Overview 43
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 3.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 98 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.87 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 44
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper 
loaded into Tray 3.
THICK 3 and THIN PAPER are 
selectable for pagepro 5650EN only.
SIZE 
SET-
TINGSettingsAUTO/USER SELECT
If AUTO is selected, the printer 
automatically detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size. 
TRAY 4 PAPER 
SIZESettingsLETTER/LEGAL/...

Configuration Menu Overview 45
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 4.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 98 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.87 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 46
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper 
loaded into Tray 4.
THICK 3 and THIN PAPER are 
selectable for pagepro 5650EN only.
SIZE 
SET-
TINGSettingsAUTO/USER SELECT
If AUTO is selected, the printer 
automatically detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size. 
TRAY 
CHAININGSettingsON/OFF
If ON is selected and...

Configuration Menu Overview 47
LOGICAL 
TRAY 
0-9SettingsPHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing 
when a print job is received from another 
manufacturer’s printer driver. 
The default setting for 
LOGICAL TRAY 
2
 is PHYSICAL TRAY 2. The default 
settings for all other trays are 
PHYSI-
CAL TRAY 1
. 
PHYSICAL TRAY3 and 
PHYSICAL TRAY4 appear only if 
an optional lower feeder unit is 
installed.
DUPLEXSettingsOFF/LONG EDGE/SHORT EDGE
If...

Configuration Menu Overview 48
FIN-
ISHINGSettingsSUB TRAY/MAIN TRAY/OFFSET
When SUB TRAY is selected, the paper is fed to the sub output 
tray.
When 
MAIN TRAY is selected, the paper is fed to the main out-
put tray.
When 
OFFSET is selected, the paper is fed to the sub output tray 
with each copy slightly shifted.
The setting specified in the printer driver will override this menu 
setting.
The paper size available for SUB TRAY or OFFSET is as 
follows:
Width: 
89 to 216 mm (3.5 to 8.5 inches)
Length:...

Configuration Menu Overview 49 QUALITY MENU
With this menu, settings for the print quality can be specified.
All factory default values are shown in bold.
RESOLU-
TIONSettings600/1200
The resolution of the print image (600dpi or 1200dpi) can be 
specified.
BRIGHT-
NESSSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
CONTRASTSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the print image can be adjusted.
TEXT PRINTING
RESOLUTION
BRIGHTNESS
HALFTONE...

Configuration Menu Overview 50
HALFTONE IMAGE 
PRINTINGSettingsLINE ART/DETAIL/
SMOOTH
Select how halftones in images are 
reproduced.
If 
LINE ART is selected, halftones are 
reproduced with high precision.
If 
DETAIL is selected, halftones are 
reproduced with detail.
If 
SMOOTH is selected, halftones are 
reproduced with smoothness.
TEXT 
PRINTINGSettingsLINE ART/DETAIL/
SMOOTH
Select how halftones in text are 
reproduced.
If 
LINE ART is selected, halftones are 
reproduced with high precision.
If...