Konica Minolta PagePro 1480MF User Manual

MFP Laser
- 37 -
8 - PC Features
11Select the destination folder for installation and 
click on the N
EXT button.
12The final installation is ready to be executed. Click 
on the I
NSTALL button.
13A screen informs you of the installation progress.
14Click on OK to finish the installation.
The Companion Suite Pro software is now installed on 
your PC.
You can now connect your multifunction machine, refer to 
paragraph Connections, page 38.
Installing the drivers manually
You can install the printer and...

MFP Laser
- 38 -
8 - PC Features
5Select LASER PRO LL2 in the list and click on NEXT.
6A screen informs you that the drivers have been 
installed. Click on the C
LOSE button.
You can now use the multifunction machine to print or 
scan your documents.
Connections
Make sure that your multifunction machine is powered off. 
The connection between the PC and the machine 
requires a USB 2.0 shielded cable no more than 3 meters 
long.
1Locate your USB cable connectors and connect as 
shown below on the...

MFP Laser
- 39 -
8 - PC Features
Multifunction Terminals Supervision
The software that you have installed contains two 
multifunction machine management applications, 
C
OMPANION DIRECTOR and COMPANION MONITOR, which 
allow you to:
• check whether the multifunction machine is connected 
to your PC,
• monitor the multifunction machine activities,
• monitor the status of the multifunction machine 
consumables from the PC,
• quickly access the graphic editor applications.
To manage the multifunction...

MFP Laser
- 40 -
8 - PC Features
Status of the connection
The status of the connection between the current device 
and the PC is indicated by a colour. The following table 
defines the possible states of the connection.
Device parameters
1Select a device by clicking on its line in the list and 
click on P
ROPERTIES to configure the scanning 
parameters to be applied for this device when you 
use the S
CAN TO function.
2Select the desired scan M
ODE in the drop-down 
menu.3Select the desired scan R...

MFP Laser
- 41 -
8 - PC Features
Companion Suite Pro functionalities
Document analysis
The document analysis can be carried out in two ways: 
• either by the S
CAN TO function (application accessible 
from the Companion Director window or from the 
SCAN button on the machine), 
• or directly from a standard compatible application.
Analysis with Scan To
Run the application by clicking on the COMPANION 
D
IRECTOR icon located on your desktop or from the menu 
S
TART >ALL PROGRAMS > COMPANION SUITE > 
C...

MFP Laser
- 42 -
8 - PC Features
Printing in duplex mode with the multifunction 
machine
The machine offers the possibility to print a document in 
manual duplex mode from your PC.
To print a document in manual duplex mode:
1Use the P
RINT command from the FILE menu of the 
currently open application on the screen.
2Select the L
ASER PRO LL2 printer.
3Check the Duplex box and choose among the two 
binding modes:
4Click on the OK button to begin printing.
5The machine prints the odd pages (from the higher...

MFP Laser
- 43 -
8 - PC Features
Software Uninstallation
This section describes the following procedures:
• full uninstallation of the Companion Suite Pro 
software,
• uninstallation of the drivers only.
Uninstall the software from your PC
Turn your PC on. Open an account session with the 
administration rights.
Run the programs removal from the menu S
TART 
>A
LL PROGRAMS >COMPANION SUITE  >  COMPANION SUITE 
P
RO LL2 > UNINSTALL.
1A confirmation screen appears. Click on the Y
ES 
button to continue the...

MFP Laser
- 44 -
8 - PC Features
6Select the option REMOVE DRIVER AND DRIVER 
PACKAGE and click on the OK button. 
7A confirmation screen appears. Click on the Y
ES 
button to continue.
8Click on the D
ELETE button to confirm the removal.
To remove scan and modem drivers:
1Open the D
EVICE MANAGER window (START 
>C
ONTROL PANEL > SYSTEM > HARDWARE > DEVICE 
MANAGER or START >CONTROL PANEL > HARDWARE 
AND SOUND > DEVICE MANAGER, depending on the 
operating system).
2In the O
THER DEVICES sub-menu, select...

MFP Laser
- 45 -
9 - Maintenance
Maintenance
Service
General information
To ensure that your machine is kept in the best 
conditions, it is recommended that you periodically clean 
the inner parts.
Please respect the following rules while using this 
machine:
- Do not leave the scanner cover open.
- Do not try to lubricate the device.
- Do not close the scanner cover violently or do not 
apply vibrations to the machine.
- Do not open the cartridge access cover while printing.
- Do not try to disassemble...

MFP Laser
- 46 -
9 - Maintenance
A wait message appears. 
The smart card is read.
9Remove the smart card from the reader, your 
machine is ready to print again.
Issues with smart cards
If you use a smart card that has already been used, the 
machine will display:
then,
If you use a defective smart card, the machine will display:
then,
If the C button is pressed while the smart card is being 
read, the machine displays:
Cleaning
Scanner reading system cleaning
When one or more vertical lines appear on the...