Konica Minolta bizhub PRO 950 User Manual

Downloaded From ManualsPrinter.com Manuals 

Overview2
bizhub PRO 950 2-1
2Overview
The image controller feature enables the copier to connect to computers and 
networks to use as a printer.
Copier
Downloaded From ManualsPrinter.com Manuals 

2Overview
2-2 bizhub PRO 950
2.1 Printer Driver
This printing system is equipped with the PCL and the optional PostScript3 
(PostScript PPD/PS Plug-in) printer functions.
In order to use this printing system, it is necessary to install a printer driver in 
a computer.
2
Note 
Refer to “Installation of the printer driver (Windows) (Manual installation 
using the Add Printer wizard)” on page4-1 and “Installation of the printer 
driver (Macintosh)” on page 5-1 for more information about installation of...

Overview2
bizhub PRO 950 2-3
2.2 Composition of a product
This image controller is equipped with an Ethernet compatible network port 
and a USB port (USB 2.0).
2.2.1 Memory
The image controller is equipped with 2GB memory by default.
2.2.2 Other options
The following options installed on the printer enables variable functions.
-Paper Source option (LU-407 / LU-408) enables to select Tray 4.
-Installing the Finisher (FS-528 / FS-611) enables to use “Staple”, “Center 
Staple and Fold (FS-611 only)” and...

2Overview
2-4 bizhub PRO 950
2.3 Connections of the Image Controller
You can use the copier as a printer by connecting image controller to a com-
puter (using with USB connection) or a network (using with Ethernet connec-
tion).
2.3.1 Ethernet Connection
You can also connect the copier to computers supporting Ethernet. 
Several alternatives can be considered in the Ethernet connection. In any of 
them, you must set up the printer driver in each computer after configuring 
the network (such as TCP/IP...

Overview2
bizhub PRO 950 2-5
2.4 Product Specifications
Type
Type: Built-in box type for the KONICA MINOLTA Printer/
Copier
Functions
Resolution: Printing System: 600 x 600 dpi
Scanning resolution: 200 dpi / 300 dpi / 400 dpi / 
600 dpi
Gradation: binary
Printable Area: Standard: Margin 2.8 mm (left, right, top 
and bottom without variation)
Non-standard pa-
per:Width: 100-303mm
Length: 140-460mm
No. of Print: 1 to 9999
Continuous print 
speed:95 ppm (A4, 8.5 x 11) / (600 x 600 dpi)
Page Description...

2Overview
2-6 bizhub PRO 950
2.4.1 Restrictive Conditions
Although the Weekly Timer function of the main body printer is available in 
the Printer mode, the power is not turned off until the data output is finished 
when print data remains in the Image memory. 
2
Note 
Specifications are subject to change without notice.
Printing Method: SMB printing (TCP/IP) / LPD/LPR (TCP/IP) / RAW 
(Port9100, Setting can be made for up to 6 ports) /IPP 
(TCP/IP), Web service print (TCP/IP), Bonjour (TCP/IP), 
Pserver...

Installation of the printer driver (Windows) (Easy insta llation using the installer)3
bizhub PRO 950 3-1
3 Installation of the printer driver 
(Windows) (Easy installation using the 
installer)
This installer automatically detects wh ether this machine is connected via 
USB or on the same TCP/IP network as the computer, then installs the 
required printer driver. You can also manually specify the connection 
destination during installation.
2
Note 
The printer driver which can be insta lled as described...

3Installation of the printer driver (Windows) (Easy installation using the installer)
3-2 bizhub PRO 950
3Read through the License Agree-
ment and click [AGREE].
– Language for the display can be 
changed in the pull-down menu 
on the lower left side of the win-
dow.
– Windows Vista screens are indi-
cated here for description.
4Select [Install printers/MFPs] and 
click [Next].
[Select Printer/MFP to install] win-
dow appears.
5Select and install a copier. A copier can be selected by either way of 
two...

Installation of the printer driver (Windows) (Easy installation using the installer)3
bizhub PRO 950 3-3– If the connection of this machine 
cannot be recognized, or when 
specifying manually:
To specify a unit manually, select 
[Specify the Printer/MFP Except 
for the Above] and click the [Re-
fer to].
– [Manual Settings] window ap-
pears.
– Select either [Printer Path], [IP 
v4, IPv6 Address], [IP Host 
Name] or [Local Port] and enter 
information as required. Then 
click the [OK].
– [Select...