Konica Minolta bizhub C20 User Manual

Checking the Machine Status and Settings 27
Checking the Machine Status and Settings
TONER REMAINING
With the main screen displayed, press the * key to display the TONER 
REMAINING screen. From this screen, a general estimate of the amount of 
toner remaining in the toner cartridges can be viewed.
To return to the main screen, press the Back key.
If the Select key is held down for at least 2 seconds while the screen 
described above is displayed, the configuration page will be printed.
REPORT/STATUS...

Checking the Machine Status and Settings 28
TOTAL PRINT
The total number of pages for each of the following can be checked.
SUPPLY STATUS
The remaining amount of toner in the toner cartridges and the remaining ser-
vice life of the imaging units can be displayed as a percentage.
TOTAL PRINTThis counter shows the total number of pages 
printed.
MONO COPYThis counter shows the total number of pages 
copied in black-and-white.
COLOR COPYThis counter shows the total number of pages 
copied in color.
MONO...

Checking the Machine Status and Settings 29
TX/RX RESULT
For details, refer to the Facsimile User’s Guide on the Documentation CD/
DVD.
REPORT
The machine settings, lists and reports related to fax can be printed.
TX RESULT REPORTPrints the results of fax transmissions. For 
details, refer to the Facsimile User’s Guide on 
the Documentation CD/DVD.
RX RESULT REPORTPrints the results of fax receptions. For details, 
refer to the Facsimile User’s Guide on the Doc-
umentation CD/DVD.
ACTIVITY REPORTPrints...

Checking the Machine Status and Settings 30
PCL FONT LISTPrints the PCL font list.
DIRECTORY LISTPrints the directory list of the hard disk or a 
CompactFlash card.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 31
Configuration Menu Overview
To display the settings menu for this machine, select UTILITY in the main 
screen, and then press the Select key. From the UTILITY menu, settings for 
the various machine functions can be changed.
In addition, Copy mode settings can be specified for PS/PCL printing and 
memory direct printing. For details, refer to “PS/PCL PRINT Menu” on page 
69 and “MEMORY PRINT Menu” on page 101.
UTILITY Menu
From this menu, various machine settings can be...

Configuration Menu Overview 32
* This menu item appears when ADOMIN. MANAGEMENT/CAMERA 
DIRECT
 is set to ENABLE.
FAX RX OPERATION
REPORTING
SCAN SETTING
DIRECT PRINT
*
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 33
MACHINE SETTING Menu
MACHINE SETTING AUTO PANEL RESET
PREHEAT MODE
ENERGY SAVE MODE
LCD CONTRAST
KEY SPEED TIME TO START
INTERVAL
LANGUAGE
LAMP OFF TIME
LAMP WARMUP TIME
BUZZER VOLUME
INITIAL MODE
TONER EMPTY
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 34
Manufacturer’s default settings appear in bold.
TONER NEAR EMPTY
I-UNIT NEAR EMPTY
AUTO CONTINUE
CALIBRATION
AUTO PANEL RESETSettingOFF / 30sec / 1min / 2min / 
3min / 4min / 5min
Specify the length of time until all settings that 
have not been programmed, such as the num-
ber of copies, are cleared and return to their 
default settings when no operation is performed.
To set the machine to perform the auto panel 
reset operation, select from 30sec, 1min, 2min, 
3min, 4min...

Configuration Menu Overview 35
KEY 
SPEEDTIME TO 
STARTSetting0.1sec / 0.3sec / 0.5sec / 
1.0sec / 1.5sec / 2.0sec / 
2.5sec / 3.0sec
Specify the length of time until the cursor begins 
to move continuously when a key is held down.
INTERVALSetting0.1sec / 0.3sec / 0.5sec / 
1.0sec / 1.5sec / 2.0sec / 
2.5sec / 3.0sec
Specify the length of time until the cursor contin-
uously moves between settings or characters.
LANGUAGESettingENGLISH / FRENCH / GERMAN / 
ITALIAN / SPANISH / PORTU-
GUESE
 / RUSSIAN /...

Configuration Menu Overview 36
BUZZER VOLUMESettingOFF / LOW / HIGH
Select the volume of the sound produced when 
a key is pressed and of the alarm that is 
sounded when an error occurs.
INITIAL MODESettingCOPY / FAX
Specify the default mode when the machine is 
turned on or when all settings in the control 
panel return to their default settings.
TONER EMPTYSettingSTOP / BW CONTINUE
Select whether or not printing, copying and fax-
ing stop when the toner has run out.
If 
STOP is selected, printing,...