Konica Minolta bizhub 652 User Manual

							bizhub 652/5522-76
2.16 SNMP Setting Function2
4Click [OK].
%If the entered auth-password or priv-password does not meet the requirements of the Password 
Rules, a message that tells that the entered auth-password or priv-password cannot be used ap-
pears. Enter the correct auth-password or priv-password. For details of the Password Rules, see 
page 1-8.
%If the entered auth-password or priv-password does not match, a message that tells that the auth-
password or priv-password does not match appears.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-77
2.16 SNMP Setting Function2
2.16.2 SNMP access authentication function
If the settings of the Administrator mode are to be changed using SNMP from the PC, the user attempting to 
gain access is authenticated to be the Administrator of the machine by using the Write User Name and SNMP 
Password (auth-password, priv-password) of the SNMP v3 Write settings made in this machine.
Operation of the network setting function and the SNMP password change function of the security control 
functions that can be used over the network using SNMP is granted to the Administrator who is identified by 
a matching SNMP password for the Write User Name.
The entry of a wrong SNMP password (auth-password, priv-password) is counted as unauthorized access, 
if the Enhanced Security Mode is set to [ON]. If a wrong SNMP password (auth-password, priv-password) is 
entered a predetermined number of times (once to three times) or more set by the Administrator of the ma-
chine, the machine is set into an access lock state, rejecting any more logon attempts. To cancel the access 
lock state, perform the Release Setting by the Administrator of the machine.
Reference
-If [auth-password] has been selected for Security Level, hashing is used for the authentication informa-
tion (auth-password) to be transmitted. The machine allows you to select either HMAC-MD5 or HMAC-
SHA1 for hashing.
-If [auth-password/priv-password] has been selected for Security Level, the authentication information 
(auth-password/priv-password) and data (object ID that specifies the object to be changed, value to be 
set, etc.) to be transmitted are used for hashing and encryption. The machine allows you to select either 
CBC-DES or CBC-AES for encryption.
-For accessing the MIB, use the MIB browser corresponding to the above encryption algorithm.
2.16.3 SNMP v3 setting function
The Administrator who has been authenticated through SNMP access authentication from the PC is allowed 
to operate the SNMP password change function.
The entry of a wrong SNMP password (auth-password, priv-password) is counted as unauthorized access, 
if the Enhanced Security Mode is set to [ON]. If a wrong SNMP password (auth-password, priv-password) is 
entered a predetermined number of times (once to three times) or more set by the Administrator of the ma-
chine, the machine is set into an access lock state, rejecting any more logon attempts. To cancel the access 
lock state, perform the Release Setting by the Administrator of the machine.
For the auth-password and priv-password, enter the password that meets the requirements of the Password 
Rules. For details of the Password Rules, see page 1-8.
To change the setting, specify the corresponding object ID. See the table below for the setting items.
Setting ItemObject ID
Write User Name 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.2.2
auth-password 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.3.2
priv-password 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.4.2
Security Level 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.5.2
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-78
2.16 SNMP Setting Function2
2.16.4 SNMP network setting function
The Administrator who has been authenticated through SNMP access authentication from the PC is allowed 
to operate the network setting function. To change the setting, specify the corresponding object ID. See the 
table below for the setting items.
Setting ItemObject ID
IP address setting IP Address 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.3.1
BOOT Protocol use setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.6.1
BOOT Protocol Type 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.7.1
DNS server address setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.2.1.3.1.1
SMTP server address setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.13.1.1.3.1
NetWare setting Print Server Name 1.3.6.1.4.1.18334.1.1.2.1.5.8.3.1.3.1.1
Printer Name 1.3.6.1.4.1.18334.1.1.2.1.5.8.5.1.3.1.1
AppleTalk Printer Name Setting 1.3.6.1.4.1.18334.1.1.2.1.5.9.2.1.3.1.1
NetBIOS setting 1.3.6.1.4.1.18334.1.1.2.1.5.10.1.1.4.1
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-79
2.17 WebDAV Function2
2.17 WebDAV Function
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the WebDAV Server Password. The Administrator of the machine 
can gain access to the WebDAV Server over the network by using the WebDAV Server Password. WebDAV 
Server Password may consist of 8 digits. The password entered for the authentication purpose appears as 
* or ● on the display.
Setting the WebDAV Server Password

0For the procedure to call the Network Settings screen on the display, see steps 1 and 2 of page 2-70.
0Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If 
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0Unauthorized access could result if the WebDAV Server Password required for accessing the WebDAV 
Server is incorrectly set. The Administrator of the machine should therefore make sure to set the appro-
priate password and control its operation so that the password is not leaked.
0The entry of a wrong WebDAV Server password is counted as unauthorized access, if the Enhanced 
Security Mode is set to [ON]. If a wrong WebDAV Server password is entered a predetermined number 
of times (twice, four times, or six times) or more set by the Administrator of the machine, the machine 
is set into an access lock state, rejecting any more logon attempts. To cancel the access lock state, 
perform the Release Setting by the Administrator of the machine.
1Call the Network Settings screen on the display from the control panel.
2Touch [Forward] and touch [WebDAV Settings].
3Touch [WebDAV Server Settings].
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-80
2.17 WebDAV Function2
4Select [ON] and touch [Password Setting].
5Enter the new WebDAV Server Password from the keyboard or keypad.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
%Press the [C] key to clear all characters.
%Touch [Delete] to delete the last character entered.
%Touch [Shift] to show the upper case/symbol screen.
%Touch [Cancel] to go back to the screen shown in step 4.
6Touch [OK].
%If the entered WebDAV Server Password does not meet the requirements of the Password Rules, a 
message that tells that the entered WebDAV Server Password cannot be used appears. Enter the 
correct WebDAV Server Password. For details of the Password Rules, see page 1-8.
%If the entered WebDAV Server Password does not match, a message that tells that the WebDAV 
Server Password does not match appears. Enter the correct WebDAV Server Password.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-81
2.17 WebDAV Function2

0For the procedure to access the Admin Mode, see page 2-2.
0Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1Start PageScope Web Connection and access the Admin Mode.
2Select [WebDAV Settings] from the pull-down menu of Network and click [Display].
3Click [WebDAV Server Settings] from the [WebDAV Settings] menu.
4Click the pull-down menu of WebDAV Settings and select [ON].
5Click the [Password is changed] check box and enter the WebDAV Server Password.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-82
2.17 WebDAV Function2
6Click [OK].
%If the entered WebDAV Server Password does not meet the requirements of the Password Rules, a 
message that tells that the entered WebDAV Server Password cannot be used appears. Enter the 
correct WebDAV Server Password. For details of the Password Rules, see page 1-8.
%If the entered WebDAV Server Password does not match, a message that tells that the WebDAV 
Server Password does not match appears. Enter the correct WebDAV Server Password.
7Check the message that tells that the setting has been completed. Then, click [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-83
2.18 PC-Fax RX Setting Function2
2.18 PC-Fax RX Setting Function
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the operation of the PC-Fax RX Setting Function. This function 
enables received fax documents to be saved in user boxes on the hard disk installed in the machine. Memory 
RX User Boxes or any other user boxes specified are used as saving destination user boxes.
NOTICE
If the PC-Fax RX Setting is made, the TSI User Box Setting function cannot be used.
PC-Fax RX Setting

0For the procedure to call the Administrator Settings on the display, see page 2-2.
0Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If 
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1Call the Administrator Settings on the display from the control panel.
2Touch [Fax Settings].
3Touch [Function Settings].
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-84
2.18 PC-Fax RX Setting Function2
4Touch [PC-Fax RX Setting].
5Make the necessary settings.
%When [Specified User Box] is selected, the data is stored at the box whose number is assigned with 
F code Sub address.
%When Dial-in is set ON, [Dial-In only] appears after [Allow]. PC-FAX receiving setting can be made 
only when the data is received with dial-in number.
%FAX input data is saved to the box as TIFF.
%When a user deleted [Specified User Box] specified at Receiving User Box Destination, the received 
data will be saved at print or forced memory inbox according to the conditions set for FAX receiving. 
Also when a new box is assigned with the same box number after [Specified User Box] specified at 
Receiving User Box Destination is deleted, the data will be saved at the newly assigned inbox, there-
fore you should be careful with the number assigned.
6Touch [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub 652/5522-85
2.18 PC-Fax RX Setting Function2

0For the procedure to access the Admin Mode, see page 2-2.
0Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1Start PageScope Web Connection and access the Admin Mode.
2Select [Function Setting] from the pull-down menu of Fax Settings and click [Display].
3Click [PC-Fax RX Setting] from the [Function Setting] menu.
4Click the pull-down menu of PC-Fax RX Setting and select [Allow].
5Make the necessary settings.
6Click [OK].
7Check the message that tells that the setting has been completed. Then, click [OK].
Downloaded From ManualsPrinter.com Manuals