Kodak Z710 User Manual

							Doing more with your camera
www.kodak.com/go/support
 35
Customizing your camera
Use Setup to customize your camera settings.
1In any mode, press the Menu button.
2Press  to highlight Setup, then press the OK button.
3Press  to highlight the setting you wish to change, then press the OK button.
4Choose an option, then press the OK button.
5Press the Menu button to exit.
SettingOptions
Return to previous menu.
Capture Frame Grid 
Turn framing grid on or off.
On
Off (default)
Quickview 
Change Quickview default.
On
Off (default)
Advanced Digital Zoom
Choose how digital zoom is employed.
Continuous—no pause between optical and 
digital zoom.
Pause (default)—after reaching 10X optical 
zoom, the zoom button must be released, then 
activated again to begin digital zoom.
None—digital zoom is disabled.
Print WarningPause (default)—when the slider on the zoom 
indicator pauses during digital zoom, the zoom 
must be released and reactivated. The slider turns 
red when the picture may not render an acceptable 
4 x 6 in. (10 x 15 cm) print. 
None—no pause.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							36www.kodak.com/go/support Doing more with your camera
Sound ThemesShutter only
Default
Classical
Jazz
Sci-fi
Sound VolumeOff
Low (default)
Medium
High
Mode Description
Display description when entering a 
mode. 
On (default)  
Off
Auto Power Off
Choose amount of inactivity time until 
camera turns off.
10 minutes 
5 minutes
3 minutes (default)
1 minute
Date & TimeSee page 3.
Video Out 
Choose the regional setting that lets you 
connect the camera to a television or 
other external device.
NTSC (default)—used in North America and 
Japan; most common format.
PAL—used in Europe and China.
Orientation Sensor
Orient pictures so that they are displayed 
with the correct side up.
On (default)  
Off
Date Stamp
Imprint the date on pictures.
Choose a date option, or turn off the feature. 
(Default is off.)
Video Date Display
Display Date/Time at the start of video 
playback.
None (default)
Choose a date/time format
SettingOptions
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Doing more with your camera
www.kodak.com/go/support
 37
Adjusting exposure compensation
Use exposure compensation before you take a picture to make it lighter or darker.
1In Auto mode, press . 
Exposure compensation information appears on the LCD or EVF. (To change exposure 
compensation in P, A, S, and M modes, see 
page 38.)
2To make pictures lighter, press . 
To make pictures darker, press .
The setting remains until you change it or turn off the camera.
Language
Format
CAUTION:
Formatting internal memory or 
a card deletes all (including 
protected) pictures, videos, 
email addresses, album names, 
and favorites. 
Memory Card—deletes everything on the card; 
formats the card. 
Cancel—exits without making a change.
Internal Memory—deletes everything in internal 
memory including email addresses, album names, 
and favorites; formats the internal memory.
About
View camera information.
SettingOptions
Downloaded From camera-usermanual.com Kodak Manuals 
						

							38www.kodak.com/go/support Doing more with your camera
P, A, S, and M modes
Use these modes when you want more control over your camera and pictures.
NOTE:  Settings you change in P, A, S, or M modes apply only to pictures taken in those modes. For example, 
if you change the Color Mode to Sepia while in P, A, S, or M mode, you retain the default setting of 
Color for Auto and Scene modes. 
 
The settings, including Flash, are maintained for P, A, S, and M modes—even when you change 
modes or turn off the camera. Use Reset to Default (see the table that starts on 
page 32) to reset P, 
A, S, or M mode to its default setting. 
Use this modeFor
ProgramControlling exposure compensation (how much light enters the camera). 
The camera automatically sets the shutter speed and aperture (f-stop) 
based on the scene lighting. Program mode offers the ease of auto 
shooting with full access to all menu options. Press 
  to select 
settings.
Aperture 
Priority
Controlling aperture, exposure compensation, and ISO speed. Aperture 
priority mode is primarily used to control depth of field (the range of 
sharpness).
NOTE: The aperture setting may be affected when using optical zoom. 
Press 
  to select settings.
Shutter 
Priority
Controlling the shutter speed, exposure compensation, and ISO speed. 
The camera automatically sets the aperture for proper exposure. Shutter 
priority mode is primarily used to prevent blur when your subject is 
moving. To prevent camera shake, use a tripod for slow shutter speeds. 
Press 
  to select settings.
ManualThe highest level of creative control. You set the aperture, shutter speed, 
and ISO speed. Exposure compensation acts as an exposure meter, 
recommending the proper combination of aperture and shutter speed to 
produce an acceptable exposure. To prevent camera shake, use a tripod 
for slow shutter speeds. Press 
  to select settings.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Doing more with your camera
www.kodak.com/go/support
 39
Changing P, A, S, or M mode settings
PASM modes control the aperture (f-number, also known as f-stop), shutter speed, 
and exposure compensation. Use the Menu button to control all other settings.
1Turn the Mode dial to PASM.
The mode options are displayed.
2Press  to choose P, A, S, or M.
3Press   to move between settings, open a setting, or change a setting.
4Take a picture.
Exposure Compensation—adjust the exposure; good for controlling backlit or 
non-standard scenes. If the picture is too light, decrease the setting; if it’s too dark, 
increase the setting.
Shutter speed—control how long the shutter stays open. A shaking hand icon  
warns of slow shutter speeds. (Use a tripod for slow shutter speeds.)
Aperture—(also known as f-stop) control the size of the lens opening, which 
determines the depth of field. 
■Smaller f-stop numbers indicate a larger lens opening; good for portraits and 
low-light conditions.
■Larger f-stop numbers indicate a smaller lens opening; keeps the main subject 
sharp; good for landscapes and well-lit conditions.
Aperture Shutter speed Exposure compensation
White—selectable 
Grey—non-selectable 
Yellow—changeable value 
Red—out of range ISOPA S M  O p t i o n s
Downloaded From camera-usermanual.com Kodak Manuals 
						

							40www.kodak.com/go/support
5Transferring and printing 
pictures
Installing the software
CAUTION:
Install Kodak EasyShare software before connecting the camera or optional 
dock to the computer. Failure to do so may cause the software to load 
incorrectly. 
1Close all software applications that are open on your computer (including 
anti-virus software).
2Place the Kodak EasyShare software CD into the CD-ROM drive.
3Load the software:
Windows OS—if the install window does not appear, choose Run from the Start 
menu and type d:\setup.exe where d is the drive letter that contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install icon.
4Follow the on-screen instructions to install the software.
NOTE:  When prompted, take a few minutes to electronically register your camera and software. To register 
later, see 
www.kodak.com/go/register.
5If prompted, restart the computer. If you turned off anti-virus software, turn it back 
on. See the anti-virus software manual for details.
For information on the software applications included on the EasyShare software CD, 
see EasyShare software Help.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Transferring and printing pictures
www.kodak.com/go/support
 41
Transferring pictures
IMPORTANT: If your camera was packaged with a Kodak EasyShare dock, use the dock to 
transfer pictures to your computer. (See 
page 44 and the dock user’s guide for details.)  
If you do not have an EasyShare dock, use the USB cable (U-8) that came with your camera.
1Turn off the camera.
2Plug the labeled  end of the USB cable into the 
labeled USB port on your computer. See your 
computer user’s guide for details.
3Plug the other end of the USB cable into the USB 
port on the camera. The arrow icon on the cable 
should face you.
4Turn on the camera.
EasyShare software opens on your computer. The 
software prompts you through the transfer process. 
NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting. 
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 44)
■Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or 
www.kodak.com/go/z710accessories.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							42www.kodak.com/go/support Transferring and printing pictures
Printing pictures
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or 
without a computer. Purchase this and other accessories at a dealer of Kodak 
products or 
www.kodak.com/go/z710accessories.
Direct printing with a PictBridge enabled printer
Your camera features PictBridge technology, so you can print directly to PictBridge 
enabled printers. You need:
■Camera with fully charged batteries, or with optional Kodak 3-volt AC adapter
■PictBridge enabled printer
■USB cable included with your camera
Connecting the camera to a PictBridge enabled printer
1Turn off the camera and printer.
2Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into 
the camera and into an electrical outlet.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock 
or printer dock to power your camera.
3Connect the USB cable from the camera to the printer. (See your printer user guide 
for details. See 
www.kodak.com/go/z710accessories to order cables.)
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Transferring and printing pictures
www.kodak.com/go/support
 43
Printing from a PictBridge enabled printer
1Turn on the printer. Turn on the camera. 
The PictBridge logo is displayed, followed by the current picture and menu. (If no 
pictures are found, a message is displayed.) If the menu interface turns off, press any 
button to redisplay it.
2Press  to choose a printing option, then press the OK button.
Current Picture—Press  to choose a picture. Choose the number of copies.
Tagged Pictures—If your printer is capable, print pictures that you tagged for 
printing.
Index Print—Print thumbnails of all pictures. This requires one or more sheets of 
paper. If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory, on a card, or in Favorites. 
Choose the number of copies.
Image Storage—Access internal memory, a card, or Favorites.
NOTE:  During direct printing, pictures are not permanently transferred or saved to the computer or printer. 
To transfer pictures to your computer, see 
page 40. In Favorites mode, the current favorite picture is 
displayed.
Disconnecting the camera from a PictBridge enabled printer
1Turn off the camera and printer.
2Disconnect the USB cable from the camera and the printer.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							44www.kodak.com/go/support Transferring and printing pictures
Ordering prints online
Kodak EasyShare Gallery is one of the many online print services offered in EasyShare 
software. You can easily:
■Upload your pictures.
■Edit, enhance, and add borders to your pictures.
■Store pictures, and share them with family and friends.
■Order high-quality prints, photo greeting cards, frames, and albums—and have 
them delivered to your door.
Printing pictures from your computer
For details on printing pictures from your computer, see EasyShare software Help.
Printing from an optional SD or MMC card
■Automatically print tagged pictures when you insert your card into a printer with 
an SD/MMC slot. See your printer user’s guide for details.
■Make prints at an SD/MMC-capable Kodak picture maker/picture kiosk. (Contact a 
location prior to visiting. See 
www.kodak.com/go/picturemaker.)
■Take the card to your local photo retailer for professional printing.
Dock compatibility for your camera
To see which EasyShare camera and printer docks are compatible with your camera, 
visit 
www.kodak.com/go/adapterkitchart.
To purchase camera docks, printer docks, and other accessories,  
visit www.kodak.com/go/z710accessories.
Downloaded From camera-usermanual.com Kodak Manuals