Kodak Z700 Users Guide

							Transferring and printing pictures
www.kodak.com/go/support
 15
Installing the software
CAUTION:
Install Kodak EasyShare software before 
connecting the camera or optional 
dock to the computer. Failure to do so 
may cause the software to load 
incorrectly. 
1Close all software applications that are open on your computer (including 
anti-virus software).
2Place the Kodak EasyShare software CD into the CD-ROM drive.
3Load the software:
Windows OS-based computer—if the install window does not appear, choose Run 
from the Start menu and type d:\setup.exe where d is the drive letter that 
contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install icon.
4Follow the on-screen instructions to install the software.
Windows OS-based computer—select Complete to automatically install the most 
commonly used applications. Select Custom to choose the applications you wish to 
install.
Mac OS X—follow the on-screen instructions.
NOTE:  When prompted, take a few minutes to electronically register your camera and software. This lets 
you receive information regarding software updates and registers some of the products included 
with the camera. You must be connected to your Internet service provider to register electronically. 
To register later, see 
www.kodak.com/go/register.
5If prompted, restart the computer. If you turned off anti-virus software, turn it back 
on. See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare 
software CD, click the Help button in the Kodak EasyShare software.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							16www.kodak.com/go/support Transferring and printing pictures
Transferring pictures with the USB cable
1Turn off the camera.
2Plug the labeled   end of the USB cable into the 
labeled USB port on your computer. See your 
computer user’s guide for details.
3Plug the other end of the USB cable into the labeled 
USB port on the camera.
4Turn on the camera.
Kodak EasyShare software opens on your computer. 
The software prompts you through the transfer 
process. 
NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting. 
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 20)
■Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or 
www.kodak.com/go/z700accessories.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Transferring and printing pictures
www.kodak.com/go/support
 17
Printing pictures 
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or 
without a computer. Purchase this and other accessories at a dealer of Kodak 
products or www.kodak.com/go/z700accessories.
Direct printing with a PictBridge enabled printer
Your camera features PictBridge technology, so you can print directly to PictBridge 
enabled printers. You need:
Connecting the camera to a PictBridge enabled printer
1Turn off the camera and printer.
2Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into 
the camera and into an electrical outlet.
IMPORTANT: 
Do not use the AC adapter included with the Kodak EasyShare camera dock 
or printer dock to power your camera.
3Connect the appropriate USB cable from the camera to the printer. (See your 
printer user guide or www.kodak.com/go/z700accessories for details.)
■Camera with fully-charged batteries, or 
with optional Kodak 3-volt AC adapter■PictBridge enabled printer
■USB cable included with your camera
Downloaded From camera-usermanual.com Kodak Manuals 
						

							18www.kodak.com/go/support Transferring and printing pictures
Printing from a PictBridge enabled printer
1Turn on the printer. Turn on the camera. 
The PictBridge logo is displayed, followed by the current picture and menu. (If no 
pictures are found, a message is displayed.) If the menu interface turns off, press any 
button to redisplay it.
2Press   to choose a printing option, then press the OK button.
NOTE:  During direct printing, pictures are not permanently transferred or saved to the computer or printer. 
To transfer pictures to your computer, see page 14. In Favorites mode, the current favorite picture 
is displayed.
Disconnecting the camera from a PictBridge printer
1Turn off the camera and printer.
2Disconnect the USB cable from the camera and the printer.
Current PicturePress   to choose a picture. Choose the number of copies.
Tagged PicturesIf your printer is capable, print pictures that you tagged for 
printing and choose a print size.
Index PrintPrint thumbnails of all pictures. This requires one or more sheets 
of paper. If the printer is capable, choose a print size.
All PicturesPrint all pictures in internal memory, on a card, or in Favorites. 
Choose the number of copies.
Image StorageAccess internal memory, a card, or Favorites.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Transferring and printing pictures
www.kodak.com/go/support
 19
Ordering prints online
Kodak EasyShare print service (provided by Ofoto at www.ofoto.com) is one of the 
many online print services offered in the Kodak EasyShare software. You can easily:
■Upload your pictures.
■Edit, enhance, and add borders to your pictures.
■Store pictures, and share them with family and friends.
■Order high-quality prints, photo greeting cards, frames, and albums—and have 
them delivered to your door.
Printing pictures from your computer
For details on printing pictures from your computer, click the Help button in the Kodak 
EasyShare software.
Printing from an optional SD or MMC card
■Automatically print tagged pictures when you insert your card into a printer with 
an SD or MMC card slot. See your printer user’s guide for details.
■Make prints at an SD or MMC-capable Kodak picture maker. (Contact a location 
prior to visiting. See www.kodak.com/go/picturemaker.)
■Take the card to your local photo retailer for professional printing.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							20www.kodak.com/go/support Transferring and printing pictures
Dock compatibility for your camera
Purchase camera docks, printer docks, and other accessories at a dealer of Kodak 
products or www.kodak.com/go/z700accessories.
Kodak EasyShare dockDocking configuration
■printer dock 4000
■camera dock II
■LS420, LS 433 camera dockNot compatible
■printer dock
■printer dock plus
■printer dock 6000
■camera dock 6000
■others, including series 3 printer 
docks and camera docks
Custom
camera insert 
Adapter
Dock
Custom
camera insert 
Dock
Downloaded From camera-usermanual.com Kodak Manuals 
						

							www.kodak.com/go/support 21
4Doing more with your camera
Using the self-timer
To cancel the self-timer before the picture is taken, press the Self-timer button. 
The self-timer cancels after you take the picture.
Using the self-timer for video
Use the same procedure as above, but:
■Turn the Mode dial to video  .
■Press the Shutter button completely down.
NOTE:  The video stops when you press the Shutter button or when no storage space remains.
1
2
3
4
Place camera on a tripod or flat surface.
Compose the scene.
Press the Shutter button halfway, then 
completely down.
. Once for a 10-second delay (so you have 
time to get into the scene)
. Once more for a 2-second delay (for a 
steady, auto-shutter release on a tripod) In any still mode, press 
The picture is taken in 2 or 10 seconds.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							22www.kodak.com/go/support Doing more with your camera
Using burst
1In most Still modes, press the Burst button repeatedly to choose an option.
2Press the Shutter button halfway to set the auto focus and exposure.
3Press the Shutter button completely down and hold it to take the pictures.
The camera stops taking pictures when you release the Shutter button, when the 
pictures are taken, or when there is no more storage space.
NOTE:  During Quickview, you can delete all pictures in the burst series. To delete selectively, do so in 
Review (see page 12).
OptionDescriptionPurpose
First
BurstCamera takes up to 6 pictures (3 per second) while the 
Shutter button is pressed.Capture an expected 
event. 
Example: 
A person swinging a 
golf club.
Last
BurstCamera takes up to 30 pictures
(2 per second for up to 15 seconds) while the Shutter 
button is pressed. When the Shutter button is released, 
only the last 5 pictures are saved.Capture an event when 
the precise timing is 
uncertain. 
Example: 
A child blowing out 
birthday candles.
First 6 pictures 
are saved.
Last 5 pictures 
are saved.
NOTE: If the ISO setting is set to 400 or higher, 
the First- and Last-Burst capture are slightly 
smaller. 
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Doing more with your camera
www.kodak.com/go/support
 23
Running a slide show
Use the Slide Show to display your pictures and videos on the LCD screen. 
To run a slide show on a television or on any external device, see page 24. 
To save battery power, use an optional Kodak 3-volt AC adapter. 
(Visit www.kodak.com/go/z700accessories.)
Starting the slide show
1Press the Review button, then press the Menu button.
2Press   to highlight Slide Show  , then press the OK button.
3Press   to highlight Begin Show, then press the OK button.
Each picture and video is displayed once.
To interrupt the Slide Show, press the OK button.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display 
interval from 3 to 60 seconds.
1On the Slide Show menu, press   to highlight Interval, then press the 
OK button.
2Select a display interval.
To scroll through the seconds quickly, press and hold  .
3Press the OK button.
The interval setting remains until you change it.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							24www.kodak.com/go/support Doing more with your camera
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1On the Slide Show menu, press   to highlight Loop, then press the OK button.
2Press   to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is 
exhausted. The Loop feature remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device 
equipped with a video input. (Image quality on a television screen may not be as good 
as on a computer monitor or when printed.)
NOTE:  Ensure that the Video Out setting (NTSC or PAL) is correct (see page 38). The slide show stops if you 
connect or disconnect the cable while the slide show is running.
1Connect an audio/video cable from the camera USB, A/V Out port to the television 
video-in port (yellow) and audio-in port (white). See your television user’s guide for 
details.
2Review pictures and videos on the television.
Downloaded From camera-usermanual.com Kodak Manuals