Kodak Professional 6800 User Manual

Setting Up the Printer
1-3
Removing the Packing Material
The printer is packaged with protective inserts that prevent damage during 
shipping. Remove these inserts before using the printer. Keep the packing 
inserts; reinstall them when repacking and transporting the printer.
1.Remove the tape that holds the upper cover closed.
2.Slide the cover release toward you, then open the upper cover carefully.
IMPORTANT: Cover does not open beyond a 90° angle.
Ta p e
90˚
Downloaded From ManualsPrinter.com Manuals 

 1-4 Setting Up the Printer
3.Remove the packing material.
Installing the Trim Tray
The trim tray collects paper trimmings that are generated when the printer 
cuts the prints.
 Slide the trim tray into the printer as shown.
CAUTION:
There are sharp cutter blades inside the printer. Do not insert 
hands or objects.
IMPORTANT: To keep your prints dust-free and to prevent paper jams, 
empty the trim tray each time you change the paper.
Installing the Print Catcher
The print catcher that comes with the...

Setting Up the Printer
1-5
Loading the Ribbon
For the KODAK Photo Printer 6800, have a KODAK Photo Print Kit 
6800/4R or KODAK Photo Print Kit 6800/6R available. These kits contain the 
correct size ribbon for your printer. See Appendix A for details on the Photo 
Print Kits (sold separately).
For the KODAK Photo Printer 6805, have a KODAK Photo Print Kit 
6805/3R available. This kit contains the correct size ribbon for your printer. 
See Appendix A for details on the Photo Print Kits (sold separately)....

 1-6 Setting Up the Printer
4.Push the bar code end of the supply spool into the spool holder on the 
right.
5.Place the left side of the supply spool into the spool holder on the left.
6.Rotate the thumb wheel until the lugs on the spool holder lock into the 
notches on the supply spool.
7.Remove the label and wrapper from the ribbon.
8.Push the right side of the take-up spool into the spool holder on the 
right.
9.Place the left side of the take-up spool into the spool holder on the left.
10.Adjust the...

Setting Up the Printer
1-7
12.Close the upper cover by pressing on the center of the cover until it clicks 
in place.
Connecting the Cables
If you plan to install the printer driver software on your computer, you will 
need to install the software before you connect the cables. See Chapter 2 , 
Installing the Printer Driver Software. 
IMPORTANT: You must install the printer driver software before connecting 
the cables or your printer will not work.
Connecting the Power 
Cable You may have received more...

 1-8 Setting Up the Printer
Connecting the USB 
CableUse the included USB cable. 
1.Check that the power switch is turned off ( ).
2.Connect the USB cable to the USB connector on the back of the printer 
and to the USB connector on the computer. 
Turning On the Printer
1.Press the power switch to on ( | ).
On the operator panel, the orange Power light and the green Ready 
light illuminate, and the Ready message appears when the printer is 
initialized.
2.To turn off the printer, press the power switch to...

Setting Up the Printer
1-9
To load the paper into the printer:
1.Remove the plastic cover from the new paper roll.
IMPORTANT: Do not remove the label from the paper roll until you have 
successfully loaded the paper into the printer.
2.Attach the paper flanges to each end of the paper roll. 
a.Line up the lugs on the green paper flange with the notches on the left 
side of the paper roll.
b.Place the green paper flange on the left side of the paper roll.
c.Place the black paper flange on the right side...

 1-10 Setting Up the Printer
7.Align the edge of the paper with the alignment marks on the paper guide.
 Use the 5 alignment marks when loading paper into the 
KODAK Photo Printer 6805.
 Use the 6 alignment marks when loading paper into the 
KODAK Photo Printer 6800.
8.Insert the paper under the pinch roller. 
IMPORTANT: Do not advance the paper past the red line or you may 
cause the paper to jam.
9.Advance the paper to the red line by turning the paper feeding knob.
10.Carefully close the paper...

Setting Up the Printer
1-11
Online User Guide
This User Guide and the Quick Setup Guide are also provided on the CD that 
came with your printer. The Guides are in PDF format; ADOBE ACROBAT 
Reader (also provided) is required to read them.
Follow the on-screen directions to install ADOBE ACROBAT Reader if you do 
not already have it installed on your system.
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals