Kodak M5350 User Manual

							Setting up your camera
www.kodak.com/go/support
 5
Turning on the camera
Setting the language and date/time
NOTE:  To change language in the future, use the Settings menu (see page 41).
to change current field.
for previous/next field.
OKto accept. At the prompt, press 
OK.
to change.
OKto accept.
Language:
Date/Time:
to highlight a site.
Sharing Destinations:
to check/uncheck a site. You can tell the camera which sharing sites to offer 
when it’s time to share pictures/videos.OK
Downloaded From camera-usermanual.com Kodak Manuals 
						

							6www.kodak.com/go/support Setting up your camera
Storing pictures on an accessory SD/SDHC Card
Your camera has internal memory. We recommend purchasing an SD or SDHC Card 
(Class 4 or higher) to conveniently store more pictures/videos.
CAUTION:
A card can only be inserted one way; forcing it may cause 
damage. Inserting or removing a card while the camera is on may 
damage the pictures, the card, or the camera.
IMPORTANT: 
When you turn on the camera, it checks to see if a card is inserted. If so, 
new pictures/videos are stored on the card. 
If no card is inserted, new pictures/videos are stored in the camera’s internal memory. 
If pictures/videos are detected in internal memory and a card is inserted, the camera 
prompts you to move the pictures to the card (and erase those in internal memory).
Purchase cards www.kodak.com/go/accessories
1Turn off the camera.
2Insert a card until it clicks.
3Turn on the camera.
To remove a card, press and release it.
Optional accessory
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Setting up your camera
www.kodak.com/go/support
 7
Attaching the strap
Downloaded From camera-usermanual.com Kodak Manuals 
						

							8www.kodak.com/go/support
2Taking pictures/videos
Taking pictures
When you turn on the camera for the first time, it’s in Smart Capture mode—great for 
general picture taking. (After that, the camera “remembers” the last mode you used. 
To change modes, see page 15.)
1Use the LCD to compose the picture.
2Press the Shutter button halfway to focus and set 
exposure. 
Framing marks indicate the camera focus 
area. (If the camera is not focusing on the desired 
subject, release the Shutter button and recompose the 
scene.)
3When the framing marks turn green, press the 
Shutter button completely down. 
The new picture is briefly displayed. If you don’t like it, 
press the Delete button, then follow the prompts. (To 
delete a picture later, see page 22.)
IMPORTANT: Press the Share button to share anytime! To learn more, see page 34.
Framing 
marks 
In Liveview In Quickview
In Review
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Taking pictures/videos
www.kodak.com/go/support
 9
Other picture-taking features
■To view available tools, press the Display button 
. Press   to choose a tool, then press OK.
■To review, tag, and edit pictures and videos, press 
the Review button   (see page 20).
■To change camera settings, see page 40.
■If it’s hard to see the LCD, you can adjust the 
brightness, see page 41.
Customizing your camera
Sometimes, you want to see everything available! (Other times, you want everything 
out of your way.) Press the Display button  to change between Clean view and 
Tools view.
 Display 
 OK 
 Review 
Clean view
To o l s  v i e w
(Tools vary by 
camera mode.)
Tools
Downloaded From camera-usermanual.com Kodak Manuals 
						

							10www.kodak.com/go/support Taking pictures/videos
Using Tools to choose actions, preferences
tool, then press OK. In Review, press
to move between Tools and 
Previous/Next.
In Liveview, press
to move between Tools and 
the most recent picture.
Most recent 
picture
Press 
press 
Some settings can be
chosen using 2to choose a 
1
or
a setting, then press OK.
.
,
 tool’s setting, then press OK.Press to change a 
Note: If you chose 
to choose
To o l s
1
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Taking pictures/videos
www.kodak.com/go/support
 11
Understanding the picture-taking icons
Watch the battery level
Don’t miss out on great pictures and videos—keep your battery fully charged.
Full
Three quarters
Half
Critical
AC Power
Charge the battery See page 2
Purchase extra batteries www.kodak.com/go/accessories
Battery level
Number of pictures/video time remainingZoom slider Self-timer/Burst
Flash mode
Most recent 
picture/video
Settings
Downloaded From camera-usermanual.com Kodak Manuals 
						

							12www.kodak.com/go/support Taking pictures/videos
Taking a video
The camera is always ready to take a video—just press the Record button! 
1Use the LCD to compose the video.
2To start recording, press the Record button 
completely down then release it. To stop 
recording, press and release the button again.
The first frame of the new video and the play button 
are displayed for a few seconds. 
■To play/pause the video, press the OK button. 
■If you don’t like the video, press the Delete 
button, then follow the prompts. (To delete a 
video later, see page 22.)
Other video-taking features
■To review and work with pictures and videos, see page 20.
■To change camera settings, see page 40.
■If it’s hard to see the LCD, you can adjust the brightness, see page 41.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Taking pictures/videos
www.kodak.com/go/support
 13
Using the optical zoom
You can use the zoom while taking a video or before taking a picture.
1Use the LCD to frame your subject.
2To zoom in, press Telephoto (T). 
To zoom out, press Wide Angle (W).
3Take the picture or video.
NOTE:  For focus distances, see Specifications starting on page 49.
Using digital zoom
Use digital zoom to get up to 5X magnification beyond optical zoom. (Digital zoom is 
not available in Smart Capture mode.) Press Telephoto (T) until the slider on the LCD 
is at the end of the optical zoom range. Release Telephoto (T), then press it again.
NOTE:  You may notice decreased image quality when using digital zoom.
Turning on the date stamp feature
You can add a stamp—showing the date taken—to pictures you take next. 
IMPORTANT: 
You cannot add a date stamp to pictures already taken. Once a date stamp 
is applied, it cannot be removed on the camera.
1Press the Display button   until tools appear at the top of the LCD. 
2Press   to choose More Tools  , then press OK or  . 
3Press   to choose Date Stamp (Off)  , then press OK.
4Press   to choose Date Stamp (On)  , then press OK.
The date is stamped on pictures you take next. The feature stays on until you turn it off. 
To return to picture-taking mode, press the Shutter button halfway down.
 Zoom 
view single picture.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							14www.kodak.com/go/support Taking pictures/videos
Using the flash
Press the Flash button repeatedly until the LCD displays the desired flash mode. Flash 
modes differ between capture modes.
Flash modesFlash fires
AutoWhen the lighting conditions require it. The camera processes 
the picture to correct red eye.
Flash On (Fill)Every time you take a picture, regardless of the lighting 
conditions. Use when the subject is in shadow or is “backlit” 
(when the light is behind the subject).
Red-eye 
Reduction A preflash fires, shrinking the eye pupil, before the picture is 
taken.
OffNever
Flash button
Downloaded From camera-usermanual.com Kodak Manuals