Kodak LS753 User Manual

Getting started
 5
Setting the date and time
Setting the date & time, first time
The Date and Time have been reset message appears the first time you turn on 
the camera or if the battery is removed for an extended period of time.
1SET DATE & TIME is highlighted. Press the OK button. 
(Select Cancel to set the date and time at a later time.)
2Go to step 4 below, Setting the date & time, anytime.
Setting the date & time, anytime
1Turn on the camera. Press the Menu button.
2Press   to highlight Setup Menu,...

Getting started
 6
Checking camera and picture status
The icons that appear on the camera screen indicate the active camera and 
picture settings. Press   to turn the status information on and off.
If   is displayed in the status area, press the Flash button to display 
additional settings.
Capture modes
Only the active camera settings are displayed:
Review screen
Exposure compensationCamera mode
Low battery
Date stamp Self-Timer/BurstFlashPicture quality
Pictures/time remaining
Storage location
ISO...

Getting started
 7
Flash/Status screen
Press the Flash  button. The current camera status icons are displayed in 
the bottom half of the Flash screen. 
Storing pictures and videos on an SD/MMC 
card
Your camera has 32 MB of internal memory. You can purchase optional 
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
Insert card as shown. Do not force it; doing so may damage 
the camera or card.
Do not insert or remove a card when the green ready light 
is blinking; doing...

 8
2Taking pictures and videos
Taking a picture
1Use the viewfinder or camera screen to frame 
your subject. (Press the OK button to turn off 
the camera screen. See page 11).
2Press and hold the Shutter button halfway to 
set the exposure and focus.
3When the ready light turns green, continue 
pressing the Shutter button completely 
down to take the picture.
When the ready light blinks green, the picture is 
being saved; you can still take pictures. If the 
ready light is red, wait until it turns...

Taking pictures and videos
 9
Camera modes
Use this mode For
AutoGeneral picture-taking. Automatically sets exposure, 
focus, and flash.
PortraitFull-frame portraits of people. Subject is sharp and the 
background is indistinct. Automatically fires a low-level fill flash 
for softening shadows. Zoom to fill the frame with a head and 
shoulders pose.
Close-upClose subjects 2–39 in. (5–100 cm) from the lens in Wide 
Angle; 12–39 in. (30–100 cm) in Telephoto. Use available light 
instead of flash if...

Taking pictures and videos
 10
Scene modes (SCN)
Use this   mode  For
Night 
Landscape Distant scenery at night.
Night 
Portrait Reducing red-eye in pictures of people in night scenes or 
low-light conditions. Place the camera on a flat, steady surface 
or use a tripod. Due to slow shutter speeds, advise people to 
stay still for a few seconds after flash fires.
SportSubjects in motion. Fast shutter speed stops the action.
LandscapeDistant subjects. Flash does not fire unless you turn it on. Fixed 
focus...

Taking pictures and videos
 11
Using the camera screen as a viewfinder
1Frame your subject in the camera screen.
For more about auto-focus framing marks, 
see page 11.
2Press the Shutter button halfway and hold 
to set the exposure and focus. When the 
framing marks change color, press the Shutter 
button completely down to take the 
picture.
3To turn off the camera screen, press the 
OK button.
Using the auto-focus framing marks
When using the camera screen as a viewfinder, framing marks indicate the...

Taking pictures and videos
 12
2Press the Shutter button completely down to take the picture.
3If the camera is not focusing on the desired subject (or if the framing marks 
disappear and the Ready light blinks orange), release your finger, 
recompose the scene, and go to Step 1.
NOTE:  Framing marks appear only when the camera screen is on. 
Framing marks do not appear in Landscape mode.
Reviewing the picture or video just taken
When you take a picture or video, it is displayed on the camera screen for...

Taking pictures and videos
 13
Using optical zoom
Use optical zoom to get up to 2.8X closer to your subject. You can change 
optical zoom before (but not during) video recording.
1Use the viewfinder or camera screen to frame 
your subject.
2Press the zoom lever toward Telephoto (T) to 
zoom in. Press it toward Wide Angle (W) to 
zoom out.
If the camera screen is turned on, the zoom 
indicator shows when you are in optical or 
digital zoom.
3Take a picture or video as usual.
Using advanced digital zoom...

Taking pictures and videos
 14
Using the flash
Use the flash when you take pictures at night, indoors, 
or outdoors in heavy shadows. 
Turning on the flash
Flash range
Wide Angle2–10 ft (0.6–3.0 m)
Telephoto2–6 ft (0.6–1.8 m)
Flash Mode Flash Fires
Auto  When the lighting conditions require it.
OffNever
FillEvery time you take a picture, regardless of the lighting conditions. Use 
when the subject is in shadow or is "backlit" (when the sun is behind 
the subject). In low light, hold the camera...