Kodak DX7630 User Manual
Have a look at the manual Kodak DX7630 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 96 Kodak manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Taking pictures and videos 15 Settings apply only in P, A, S, M, and C modes Settings you change in P, A, S or M modes apply only to pictures taken in those modes. Settings you change in C mode apply only to pictures taken in that mode. For example, if you change the Color Mode to Sepia while in P, A, S, or M mode, then Auto & Scene modes retain the default setting of Color. NOTE: The settings, including Flash, are maintained for P, A, S, M, and C modes—even when you change modes or turn off the camera. Use Reset to Default (see page 24) to reset P, A, S, M, or C mode to its default setting. Using the jog dial to change P, A, S, M, or C mode settings 1Turn the Mode dial to P, A, S, M, or C. The mode options are displayed. 2Use the jog dial: ■Rotate the jog dial to move the cursor. ■Press the jog dial to open a setting. ■Rotate the jog dial to change the setting. ■Press the jog dial to save the setting. NOTE: Available options are white. Unavailable options are grey. Red options are out of range and may cause unacceptable image/print quality. Adjust the value higher or lower until it turns yellow. 3Press the Menu button to change other settings. (See page 21.) 4Take a picture. the cursor or Rotate to move change settings. Press to open or save settings. Jog dial Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 16 Using the flash Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows. You can change the flash setting in any Still mode; the default flash setting is restored when you exit the mode or turn off the camera. Turning on the flash NOTE: The flash is not available in all modes. See Flash settings in each mode, page 17. Flash Range Wide Angle 2-13.8 ft (0.6-4.2 m) Telephoto2-8.2 ft (0.6-2.5 m) Flash SettingFlash Fires Auto FlashWhen the lighting conditions require it. OffNever FillEvery time you take a picture, regardless of the lighting conditions. Use when the subject is in shadow or is “backlit” (when the sun is behind the subject). In low light, hold the camera steady or use a tripod. Red-eyeOnce, so the subject’s eyes become accustomed to the flash, then fires again when the picture is taken. (If the lighting conditions require flash but do not require Red-eye reduction, the flash may fire only once.) Press theFlash/Status through the flash options. The active flash icon is displayed in the camera screen status area. button to scroll Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 17 Flash settings in each mode Capture modeDefault settingAvailable settings AutoAuto* Auto, Off, Fill Flash, Red-eye P, A, S, M, or CAuto Auto, Off, Fill Flash, Red-eye Scene Modes PortraitAuto* Auto, Off, Fill Flash, Red-eye SportsAuto Auto, Off, Fill Flash, Red-eye LandscapeOff Off Close-upOff Auto, Off, Fill Flash, Red-eye Night PortraitRed-eye* Auto, Off, Fill Flash, Red-eye Night LandscapeOff Off SnowAuto* Auto, Off, Fill Flash, Red-eye BeachAuto* Auto, Off, Fill Flash, Red-eye TextOff Auto, Off FireworksOff Off FlowerOff Auto, Off, Fill Flash Manner Off Off Self PortraitRed-eye* Auto, Off, Fill Flash, Red-eye PartyRed-eye* Auto, Off, Fill Flash, Red-eye ChildrenAuto* Auto, Off, Fill Flash, Red-eye P, A , S , M, C Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 18 * When you change to Auto or Red-eye in these modes, it becomes the default until you change it. Shooting close-up and landscape pictures Use the Close-up/Landscape button to take pictures of scenes that are very close or very far away. (Not available in Scene modes.) 1Set the Mode dial to any Capture mode. 2Press the Close-up/Landscape button repeatedly until the or icon appears in the status bar. 3Take a picture. Close-up pictures Use the Close-up setting to gain sharpness and detail in pictures at close range. Use available light instead of flash if possible. The camera automatically sets the focus distance depending on the zoom position: Landscape pictures Use the Landscape setting to gain maximum sharpness of far away scenes. With this setting, the camera uses infinity auto-focus. Auto-focus framing marks (see page 9) are not available in Landscape. BacklightFill Fill VideoOff Off First burstOff Off Last burstOff Off Exposure bracketingOff Off Capture modeDefault settingAvailable settings Close-up/Landscape Zoom positionClose-up focus distance Wide angle 2.75 to 27.6 in. (7 to 70 cm) Telephoto 11 to 27.6 in. (28 to 70 cm) Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 19 Using exposure bracketing 1Set the exposure bracketing interval. (See Exposure Bracketing Interval, page 22 .) 2In any Still mode, press the Burst button repeatedly to choose . 3Press the Shutter button halfway and hold to set the auto-focus and exposure. 4Press the Shutter button the rest of the way down to take the pictures. The camera takes 3 pictures. To evaluate them, press the Review button. Exposure bracketing turns off after the pictures are taken. Using exposure compensation with exposure bracketing In P, A, and S modes, you can use exposure compensation in conjunction with exposure bracketing. OptionDescriptionPurpose Exposure BracketingThe camera takes 3 pictures—one at +, one at 0, and one at - exposure. Determine the best exposure level for your conditions based on your evaluation of 3 pictures. If exposure compensation is set toAnd if the exposure bracketing interval is set toThen the exposures taken are 0.0 the default +/-0.3-0.7, 0.0, +0.3 +1.0 +0.7, +1.0, +1.3 -1.0 -1.3, -1.0, -0.7 Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 20 Using burst 1In any Still mode, press the Burst button repeatedly to choose an option. 2Press the Shutter button halfway and hold to set the auto-focus and exposure. 3Press the Shutter button the rest of the way down and hold it to take the pictures. The camera stops taking pictures when you release the Shutter button, when the pictures are taken, or when there is no more storage space. OptionDescriptionPurpose First BurstCamera takes up to 4 pictures while the Shutter button is pressed.Capture an expected event. Example: A person swinging a golf club. Last BurstCamera takes up to 30 pictures (2 per second for up to 15 seconds) while the Shutter button is pressed. When the Shutter button is released, only the last 4 pictures are saved.Capture an event when the precise timing is uncertain. Example: A child blowing out birthday candles. First 4 pictures are saved. Last 4 pictures are saved. Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 21 Changing picture-taking settings You can change settings to get the best results from your camera: 1Press the Menu button. (Some settings are unavailable in some modes.) 2Press to highlight a setting, then press the OK button. 3Choose an option, then press the OK button. 4Press the Menu button to exit the menu. SettingIconOptions Custom Exposure Mode Choose a preferred capture mode. (See Custom, page 12.) This setting remains until you change it. Program (default) Aperture Priority Shutter Priority Manual Available only in Custom (C) mode. Self Timer Turn the Self Timer on or off. This setting remains until you take the picture, turn the Mode dial, or turn off the camera. On Off (default) Picture Size Choose a picture resolution. This setting remains until you change it. 6.1 MP—for printing up to 30 x 40 in. (76 x 102 cm). 5.4 MP (3:2)—ideal for printing 4 x 6 in. (10 x 15 cm) prints without cropping. Also for printing up to 20 x 30 in. (50 x 76 cm); some cropping may result. 4.0 MP—for printing up to 8 x 10 in. (20 x 25 cm). 3.1 MP—for printing up to 8 x 10 in. (20 x 25 cm). 1.7 MP—for printing 4 x 6 in. (10 x 16 cm) prints, emailing, Internet, screen display, or for conserving space. Compression Choose a compression. This setting remains until you change it. The setting is displayed in the status area as “S” or “F.” Standard (default) Fine NOTE: The Fine setting renders a larger file size. P ASM JPG Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 22 White Balance Choose your lighting condition. This setting remains until you change it. The setting is displayed on the right side of Liveview if set to Daylight, Tungsten, or Fluorescent. Auto (default)—automatically corrects white balance. Ideal for general picture taking. Daylight—for pictures in natural lighting. Tungsten—corrects the orange cast of household light bulbs. Ideal for indoor pictures under tungsten or halogen lighting without flash. Fluorescent—corrects the green cast of fluorescent lighting. Ideal for indoor pictures under fluorescent lighting without flash. Unavailable in Auto, Scene, or Video modes. Exposure Bracketing Interval Choose an exposure bracketing interval. P, A, S, M, C: This setting remains until you change it or take pictures. Auto, Scene: This setting remains until you turn the Mode dial or turn off the camera. +/- 0.3 EV (default) +/- 0.7 EV +/- 1.0 EV See Using exposure bracketing, page 19. Exposure Metering Evaluate light levels at specific areas of a scene. This setting remains until you change it. The setting is displayed on the right side of Liveview if set to Center-weight or Center-spot. Multi-pattern (default)—evaluates lighting conditions throughout the image to give an optimum picture exposure. Ideal for general picture taking. Center-weight—evaluates the lighting conditions of the subject centered in the viewfinder. Ideal for backlit subjects. Center-spot—similar to Center-weight, except the metering is concentrated on a smaller area of the subject centered in the viewfinder. (A circle indicates the metering spot.) Ideal when you need an exact exposure of a specific area in the picture. Unavailable in Auto, Scene, or Video modes. SettingIconOptions Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 23 Focus Zone Choose a large or concentrated area of focus. This setting remains until you change it. The setting is displayed on the right side of Liveview if set to Center-zone or Selectable-zone. Multi-zone (default)—evaluates 3 zones to give an even picture focus. Ideal for general picture taking. Center-zone—evaluates the small area centered in the viewfinder. Ideal when precise focus of a specific area in the picture is needed. Selectable-zone—move the focus brackets to center, left, or right. NOTE: For the best pictures, the camera is set to Multi-zone when in Landscape mode. Unavailable in Auto, Scene, or Video modes. AF Control Choose an auto-focus setting. This setting remains until you change it. Continuous AF (default)—Uses external AF sensor and TTL (Through The Lens) AF. Because the camera is always focusing, there is no need to press the Shutter button halfway down to focus. Single AF—Uses external AF sensor and TTL AF when the Shutter button is pressed halfway down. Accessory Lens AF—Uses TTL-AF. Unavailable in Video mode. Color Mode Choose color tones. In Auto and Scene modes, this setting remains until you turn the Mode dial or turn off the camera. High Color Natural Color (default) Low Color Black & White Sepia (for pictures with a reddish-brown, antique look.) NOTE: EasyShare software also lets you change a color picture to black-and-white or sepia, but cannot change a black-and-white or sepia picture to color. Unavailable in Video mode. SettingIconOptions Downloaded From camera-usermanual.com Kodak Manuals
Taking pictures and videos 24 Sharpness Control picture sharpness. This setting remains until you change it. High Normal (default) Low Unavailable in Auto, Scene, or Video modes. Reset to Default Reset all picture-taking settings to the defaults. Reset P, A, S, M, or C mode to its default setting. Set Album (Still) Choose Album names. This setting remains until you change it. On or Off Pre-select album names before you take pictures or videos. Then, all the pictures or videos you take are tagged with those album names. See page 27. Image Storage Choose a storage location for pictures and videos. This setting remains until you change it. Auto (default)—the camera uses the card if one is in the camera. If not, the camera uses internal memory. Internal Memory—the camera always uses internal memory, even if a card is inserted. Liveview (Auto) Set the camera screen On/Off default for Auto mode. (Press the Display/Info button to manually turn the camera screen on or off.)On (default)—camera screen is on whenever the camera is on. Off—camera screen is off. Available only in Auto mode. Video Length (Video) Choose a default video length (useful in self-timer videos).Unlimited, 5, 15, or 30 seconds Setup Menu Choose additional settings.See Using setup to customize your camera. SettingIconOptions Downloaded From camera-usermanual.com Kodak Manuals