Kodak Dp900 Projector Reference Manual

3/9961
Appendix C
Portable and Laptop Activation Chart
Many laptop computers do not automatically turn on 
their external video port when a secondary display device 
such as a projector is connected. Activation commands 
for some laptop computers are listed in the following 
table. (If your computer is not listed or the given 
command does not work, refer to the computer’s 
documentation for the appropriate command.) On some 
laptops, the activation function key is labeled with an 
icon, for example   or...

Reference Manual KODAK DP900 / DP1100 
623/99
type from A:/IVGA/
CRTtype from A:/IVGA/
CRT
FN-F12 FN-F12
AMS FN-F2 FN-F2
AMT setup screen setup screen
AT & T F N - F 3
FN-F6FN-F3
FN-F6
Advanced 
Logic 
ResearchCtrl-Alt-V Ctrl-Alt-V
Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L
setup VGA/
Conf.Simulscansetup VGA/
Conf.Simulscan
Ambra** FN-F12 FN-F12
FN-F5 FN-F5
F2/Choose Option/
F5F2/Choose Option/
F5
Amrel* ** setup menu setup menu
Shift-Ctrl-D Shift-Ctrl-D
Computer
Key command 
to 
activate portKey command...

Appendix C
3/9963
Apple see Mac Portable and Mac PowerBook
Aspen automatic automatic
Austin Ctrl-Alt-comma Ctrl-Alt-comma
Award FN-F6 FN-F6
BCC* automatic reboot computer
Bondwell LCD or CRT 
options after bootupreboot for LCD or 
CRT options to 
appear
Chaplet** setup screen setup screen
FN-F6 FN-F6
FN-F4 FN-F4
Chembook FN-F6 FN-F6
Commax Ctrl-Alt-#6 Ctrl-Alt-#5
Compaq* ** Ctrl-Alt-< Ctrl-Alt->
FN-F4 FN-F4
automatic automatic
mode/? (for setup 
option)mode/? (for setup 
option)
Computer
Key command 
to...

Reference Manual KODAK DP900 / DP1100 
643/99
Compuadd* 
**automatic automatic
Alt-F for screen 
setup optionAlt-F for screen 
setup option
Data General Ctrl-Alt-Command Ctrl-Alt-Command
Data General 
Walkabout2 CRT/X at DOS 
promptreboot
Datavue Ctrl-Shift-M Ctrl-Shift-M
DEC** FN-F5 FN-F5
FN-F4 FN-F4
Dell** Ctrl-Alt-< Ctrl-Alt->
Ctrl-Alt-F10 Ctrl-Alt-F10
FN-F8 (CRT/LCD) FN-F8
FN-D FN-D
FN-F12 FN-F12
Digital* automatic reboot
FN-F2 FN-F2
Dolch dip switch to CRT dip switch to LCD
Computer
Key command 
to...

Appendix C
3/9965
Epson dip switch to CRT dip switch to LCD
Everex* setup screen option setup screen option
For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L
Fujitsu FN-F10
Gateway FN-F3
FN-F1/FN-F1 again 
simultaneousFN-F3
FN-F1
Grid* ** FN-F2, choose auto 
or simultaneousFN-F2
Ctrl-Alt-Tab Ctrl-Alt-Tab
Hitachi FN-F7 FN-F7
Honeywell FN-F10 FN-F10
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM 
ThinkPad**reboot, enter setup 
menuFN-F2
FN-F7, select 
choice from setup 
menu...

Reference Manual KODAK DP900 / DP1100 
663/99
FN-F1, select 
choice
FN-F5, select 
choice
PS/2 SC select 
choice (CRT, LCD, 
etc.)
Infotel FN-F12 FN-F12
Kaypro boot up, monitor 
plugged inunplug monitor
Kris Tech FN-F8 FN-F8
Leading Edge FN-T FN-T
Mac Portable 
100no video port: not compatible 
Mac PowerBook
140, 145, 150, 
170no video port: requires a 3rd-party interface
160, 165, 
180, 520, 540, 
5300Control Panel 
folder, PowerBook 
Display folder; 
Activate Video 
Mirroringwarm reboot
Computer
Key...

Appendix C
3/9967
210, 230, 250, 
270, 280, 
2300requires Apple Docking Station or Mini 
Dock
Magitronic FN-F4 FN-F4
Mastersport FN-F2 FN-F1
Micro 
Express*automatic warm reboot
Micron FN-F2 FN-F2
Microslate* automatic warm reboot
Mitsubishi SW2 On-Off-Off-
OffSW2 Off-On-On-
On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS 
promptLCD at the DOS 
prompt
FN-F3 FN-F3
Olivetti* automatic automatic
FN-O/* FN-O/*
Computer
Key command 
to 
activate...

Reference Manual KODAK DP900 / DP1100 
683/99
Packard Bell* 
**FN-F0 FN-F0
Ctrl-Alt-< Ctrl-Alt->
Panasonic FN-F2 FN-F2
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option setup screen option
Sanyo setup screen option setup screen option
Sharp dip switch to CRT dip switch to LCD
Sun SPARC-
DataviewCtrl-Shift-M Ctrl-Shift-M
Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert
setup screen option setup screen option
Tangent FN-F5 FN-F5
Te x a s  
Instruments*setup screen option setup screen...

Appendix C
3/9969
* These manufacturers have models that automatically send video to the external CRT 
port when some type of display device is attached.
** These manufacturers offer more than one key command depending on the computer 
model
FN-End FN-Home
FN-F5 FN-F5
setup screen option setup screen option
Twinhead* FN-F7 FN-F7
FN-F5 FN-F5
Automatic Automatic
WinBook Ctrl-Alt-F10 Ctrl-Alt-F10
Wyse software driven software driven
Zenith** FN-F10 FN-F10
FN-F2 FN-F2
FN-F1 FN-F1
Zeos** Ctrl-Shift-D...

3/9971
Appendix D
Using Video Mirroring with a PowerBook 
Computer
When you turn video mirroring (called SimulScan in newer 
PowerBooks-see below) on, the projector displays the same 
information that appears on your PowerBook’s built-in screen. 
When video mirroring is off, the projector acts like a separate 
display.
To turn on video mirroring for the first time:
 1. Open the Monitor’s control panel; click on Monitor 2.
 2. Set the number of colors you want.
 3. Open the Control Strip; click on the...