Kodak Dp850 Projector User Manual

							Contents
21Source
You can connect four different sources to the KODAK
DP850 ULTRA; one computer source, two video
sources and one TV tuner (optional). 
You select the source you want to use by clicking on
the icon representing the source. Use the pressure-
sensing pad on the remote mouse to move the mouse
pointer to an icon and click the button (left mouse)
underneath the remote mouse.
Set-up menu
In this menu you set up the projector with settings that
will not be changed often, e.g. language, mouse sys-
tem or picture orientation.Control panel
In this menu you can make adjustments for picture and
sound.
Removing the main menu
To remove the menu system, press the MENU key on
the Interactive Remote control. You can also remove
the menu by clicking the right mouse button (on the top
of the remote control). The right mouse button will also
function as cancel when in the menus. 
The menu will disappear in 40 seconds.  
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 21 
						

							Contents
227.2 Set-up menuSet-up menu
In the set-up menu the following 
sub-menus are available:u
Picture orientation
u
Language
u
Mouse system
u
Quick key assignment
u
ZAP keys assignment
7.2.1  Picture orientation Picture orientation
The picture orientation menu is used for rotating and
mirroring the picture.
Normal
Normal is used when the projector is standing on a
table projecting a picture on a screen.
Mirror
Mirror is used when the projector is projecting the
picture from the back of the screen
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 22 
						

							Contents
23Rotate
Rotate is used when the projector is ceiling mounted
and projecting image from the front.
Rotate and mirror
Rotate and mirror is used when the projector is ceiling
mounted and projects the picture from the back of the
screen.
7.2.2  Mouse systemMouse system selection 
USB and mouse for MAC will be selected automatically
when the mouse cable is connected. If your PC uses
RS232 mouse, you must choose MS Serial Mouse in
this menu. If your PC uses PS/2 mouse, you must
choose PS/2 in the menu. Selected system will be
active until another system is chosen. When shipped
the KODAK DP850 ULTRA is set up to PS/2.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 23 
						

							Contents
247.2.3  Language Language selectionThis menu allows you to choose between six different
menu languages: English, French, German, Italian,
Spanish and Norwegian.
Click in the box next to the language you want to use.
Click on the OK button. The window will disappear, and
the selected language will be used in the main menu
and in all other menus.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 24 
						

							Contents
257.2.4  Quick menuQuick menu settingsIn the quick menu you can assign functionality for the
quick key on the remote control. When clicking on the
quick key you will be able to switch between all the
functions you have selected in this menu. In this 
example, the first time you click on the quick key you
will activate the volume function. A volume bar will be
displayed at the bottom of the projected image where
you can adjust the volume up and down. You adjust the
bar by either pressing the pressure-sensing pad right 
or left or you may use one of the two zap keys on the
remote control. To accept the adjustment, and terminate
the quick mennues click on the left mouse button. 
To get back to the original volume, click on the right
mouse button.
The next click on the quick key will accept the volume
adjustment and activate the brightness function and a
brightness bar will be shown at the bottom of the page.
When you have gone through all assigned functions 
the menu will disappear.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 25 
						

							Contents
267.2.5   Zap menuZap menu
The Zap menu is used to assign functions to the zap
keys on the remote control. 
The menu consists of two columns of buttons where
the left column assigns the functions to the left key and
the right column assigns the functions to the right key.Volume (+/-)
Controls the sound of active source.
TV channel
Controls the pre programmed TV channel assignments.
If a TV tuner is installed and selected as source you
can select TV channel by using the zap keys.
Pointer
You can activate the pointer function in the projector.
One click activates the pointer and the next click
deactivates it.
Blank
Activates blank mode by pressing the Zap key. First click
will activate Blank mode and second click will deactivate it.
Mute
Turns the sound off. First click will turn off the sound
and second click will turn it on.
Computer
Selects Computer as source. 
Video
Selects video sources. Both Zap keys can be
programmed to select Video (video input 1 or 2).
Tuner
Select TV-tuner as source.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 26 
						

							Contents
277.2.6   Television programsThis menu is only displayed if the TV tuner is installed
and TV tuner is selected as source. The television 
program menu is then activated by pressing the
”television program” icon
The TV setup menu is divided in two parts:u
Automatic TV station 
u
Program
Automatic TV station search
This function selects all TV stations with a signal (maximum
60 stations). These will be symbolized with a TV icon. Programming new channels
There are 30 channels that can be preprogrammed.
By selecting the Search button the system will scan
through all available TV channels. A TV icon will
symbolize all channels found.
When assigning a Channel to a Program:
1.
Select a channel in the automatic search menu by
clicking on the TV icon symbolising the wanted TV
station. 
2.
The TV channel will be activated.  
3.
Select the program you want to place this channel on. 
4.
TV icon will appear on this program choice.
To search for channels manually, use the arrow keys at
the bottom right. 
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 27 
						

							Contents
287.2.7  Product informationProduct information
Click on the product information icon in order to get
information about the product and company. 
Press the main menu button again to exit this screen
7.3  Control panel menuControl panel menu
In the control panel you have access to menus for
adjusting picture and audio settings. 
The icons ”Picture positioning” and
”Synchronization Adjustments” are only 
visible if PC source is active.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 28 
						

							Contents
297.3.1  Picture controlPicture controlSelect the picture control menu for adjusting brightness,
saturation and tint. When PC is selected as source,
only brightness will be available. 
When PAL/SECAM video is selected brightness,
contrast and saturation will be available. All options will
be available for NTSC video. 
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
Selecting Default restores factory settings.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 29 
						

							Contents
307.3.2  Picture positioning Picture positioning 
Adjust vertical and horizontal position of the picture on
the screen with the two sliders.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
7.3.3   Audio controlAudio control
Select this function when you have connected an audio
signal to the ‘Audio in’ on the KODAK DP850 ULTRA
connectors (or through the EVC cable). Use the four
sliders to adjust volume, bass, treble and balance until
you have a satisfying sound.
Select Internal Mute to mute the internal speakers.
Select External Mute to mute the external audio output.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes. 
Selecting Default restores factory settings.
1214 (ELEK). KODAK ENG  05-05-98  11:41  Side 30