Kodak Dp2900 Projector User Manual

							Appendix B
61
Gateway FN-F3
FN-F1/FN-F1 again 
simultaneousFN-F3
FN-F1
Grid* ** FN-F2, choose auto 
or simultaneousFN-F2
Ctrl-Alt-Tab Ctrl-Alt-Tab
Hitachi FN-F7 FN-F7
Honeywell FN-F10 FN-F10
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM 
ThinkPad**reboot, enter setup 
menuFN-F2
FN-F7, select 
choice from setup 
menu
FN-F1, select 
choice
FN-F5, select 
choice
PS/2 SC select choice 
(CRT, LCD, etc.)
Computer
Key command 
to 
activate portKey command 
to
de-activate 
port 
						

							User Guide KODAK DP2900 Digital Projector 
62
Infotel FN-F12 FN-F12
Kaypro boot up, monitor 
plugged inunplug monitor
Kris Tech FN-F8 FN-F8
Leading Edge FN-T FN-T
Mac Portable 
100no video port: not compatible 
Mac PowerBook
140, 145, 150, 
170no video port: requires a 3rd-party interface
160, 165, 
180, 520, 540, 
5300
210, 230, 250, 
270, 280, 2300Control Panel 
folder, PowerBook 
Display folder; 
Activate Video 
Mirroringwarm reboot
requires Apple Docking Station or Mini 
Dock
Magitronic FN-F4 FN-F4
Mastersport FN-F2 FN-F1
Micro Express* automatic warm reboot
Computer
Key command 
to 
activate portKey command 
to
de-activate 
port 
						

							Appendix B
63
Micron FN-F2 FN-F2
Microslate* automatic warm reboot
Mitsubishi SW2 On-Off-Off-
OffSW2 Off-On-On-
On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS 
promptLCD at the DOS 
prompt
FN-F3 FN-F3
Olivetti* automatic automatic
FN-O/* FN-O/*
Packard Bell* ** FN-F0 FN-F0
Ctrl-Alt-< Ctrl-Alt->
Panasonic FN-F2 FN-F2
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option setup screen option
Sanyo setup screen option setup screen option
Computer
Key command 
to 
activate portKey command 
to
de-activate 
port 
						

							User Guide KODAK DP2900 Digital Projector 
64
Sharp dip switch to CRT dip switch to LCD
Sun SPARC-
DataviewCtrl-Shift-M Ctrl-Shift-M
Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert
setup screen option setup screen option
Tangent FN-F5 FN-F5
Te x a s  
Instruments*setup screen option setup screen option
Top-Link* ** setup screen option setup screen option
FN-F6 FN-F6
Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home
FN-End FN-Home
FN-F5 FN-F5
setup screen option setup screen option
Twinhead* FN-F7 FN-F7
FN-F5 FN-F5
Computer
Key command 
to 
activate portKey command 
to
de-activate 
port 
						

							Appendix B
65
* These manufacturers have models that automatically send video to 
the external CRT port when some type of display device is attached.
** These manufacturers offer more than one key command depending on 
the computer model
Automatic Automatic
WinBook Ctrl-Alt-F10 Ctrl-Alt-F10
Wyse software driven software driven
Zenith** FN-F10 FN-F10
FN-F2 FN-F2
FN-F1 FN-F1
Zeos** Ctrl-Shift-D
FN-F1Ctrl-Shift-D
FN-F1
Computer
Key command 
to 
activate portKey command 
to
de-activate 
port 
						

							67
Appendix C
Using Video Mirroring with a PowerBook 
Computer
When you turn video mirroring (called SimulScan in newer 
PowerBooks—see below) on, the projector displays the same 
information that appears on your PowerBook’s built-in screen. When 
video mirroring is off, the projector acts like a separate display.
To turn on video mirroring for the first time:
 1. Open the Monitors control panel; click on Monitor 2.
 2. Set the number of colors you want.
 3. Open the Control Strip, then click on the monitor icon.
 4. Select “Turn Video Mirroring On.”
Now you can turn video mirroring on and off from the Control Strip 
without having to open the Monitors control panel again.
When using video mirroring and high color graphics such as slide 
shows, the projected image occasionally might turn black and white. 
If this happens, perform the following steps:
 1. Turn off video mirroring.
 2. Open the Monitors control panel.
 3. Move the white menu bar to Monitor 2 to set the projector as the 
primary monitor.
 4. Restart the PowerBook. 
						

							User Guide KODAK DP2900 Digital Projector 
68
Using SimulScan
Some newer PowerBooks display images on an external monitor or 
projector differently than previous ones. When using SimulScan, the 
projector displays the same information that appears on your 
PowerBook
To select SimulScan:
 1. Open the Control Panel, then double-click Monitors and Sound. 
 2. In the Resolution list, choose the SimulScan mode, then click 
OK.
 3. If this changes your display settings, a dialog box appears. Click 
OK to confirm the change. 
						

							69
Appendix D
Projected Image Size
Use the graph and tables to help you determine projected image sizes.
Note: Image sizes shown are based on a digital keystone correction 
of zero.
Image Size, Width and Height for DP2900 
maximum image size
Distance to 
Screen (feet) Diagonal
(feet)Width
(feet)Height
(feet)
4.9 3.2 2.6 1.9
8 5.2 4.2 3.1
12 7.8 6.3 4.7
16 10.4 8.3 6.3
20 13.0 10.4 7.8
30 19.5 15.6 11.7 
						

							User Guide KODAK DP2900 Digital Projector 
70
Image Size, Width and Height for DP2900 
minimum image size
Distance to 
Screen (feet) Diagonal
(feet)Width
(feet)Height
(feet)
4.9 2.5 2.0 1.5
8 4.1 3.3 2.5
12 6.2 4.9 3.7
16 8.2 6.6 4.9
20 10.3 8.2 6.2
30 15.4 12.3 9.2