Kodak Dp 800 Projector User Manual

Contents
11Using composite video1.
Find the Composite video cable, and the audio
cable. See page 6, All cables and adapters are
provided with the Projector.
2.
Make sure that the video source and the Projector
are switched off. Connect the Composite video
cable (see page 6) from the Video out connector of
the video source to the Composite video connector
on the Projector plug panel, see fig. 6. Connect the
audio cable from the Audio out connectors of thevideo source to the Composite Audio in connectors...

Contents
12Using Scart videoThe signals from the Scart connector are the same as
from the Composite connector. If you have a Scart
connector on your video, you will have to purchase a
Scart to Composite interconnection. Connect the Scart
end of the interconnection cable to your video, and then
follow the procedure in the previous section, Using
composite video.Using S-video1.
Find the SuperVideo cable, see page 6.
All cables and adapters are provided with the
Projector .
2.
Make sure that the video...

Contents
13Using external speakersYou can connect external speakers to the Projector in
two ways:1.
Powered speakers (Speakers with built in amplifier).
These speakers can be connected directly to the
audio out connectors on the Projector amplifier.
2.
Amplifier. Connect the amplifier to the audio out on
the Projector.
When external speakers are connected, These can be
turned on or off from the Projector. To control the inter-
nal speakers, see section on Adjust audio 
settings, page 44.
Evaluating the...

Contents
14High Brightness Monochrome Mode
If you want to present information in black and white
you have the option of pulling the colour filter of the
Projector out of the light path. By pulling the handle up
you take away the colour filter, and the light goes
unobstructed to the DMD (Digital Mirror Device) chip.
This results in a projected image with much greater
light output.
Projection screen
The quality of the projection screen will also have a
significant impact on the quality of the image...

Contents
15Using the Interactive 
Remote ControlThe Interactive Remote Control has two purposes:1.
To access the MAIN MENU and control the various
image adjustment and utility functions of the
Projector.
2.
To allow remote control of your computer.
Identify the Interactive Remote Control. The Interactive
Remote Control is operated by pointing it towards the
projection screen. An infra red beam bounces from the
screen to an infra red receiver on the Projector.
NOTE 
Make sure that nothing is blocking the...

Contents
16This remote control works with Macintosh and with
Microsoft Windows version 3.1 and higher, for interac-
tive distance control of your computer. A unique pres-
sure sensing pad on the remote control makes it very
easy to control the computer, and to perform the exact
same operations as you would with a normal mouse.
The serial interface cable and the PC serial adapter are
supplied with the projector.
The Interactive Remote Control is very easy to operate.
It has only six keys in addition to...

Contents
17Hints for using the 
Interactive Remote ControlThe Interactive Remote Control is unlike any other
mouse device you have used before, and we therefore
suggest that you take a few minutes to become accus-
tomed to the new sensation of controlling the cursor by
rocking your thumb.
Below we have included some suggestions to help you
get started. With a little practice, you will quickly
become a skilled user.
Holding the Interactive Remote Control
The best way to hold the remote control is like a...

Contents
18To drag an item
Simply press and hold the primary button (button
underneath) while moving the cursor to the desired
location. Release this button to complete the drag operation. If your computer has Windows installed, you
may wish to practice this function by playing the game
of solitaire.
Backpanel of computer
RGB  OUT
Computer
Monitor CableTo COM port
To DAVIS Powerbeam
Fig. 10. Connecting the serial interface cable and 
adapter (PC)
Backpanel of computer
RGB  OUT
Computer
Monitor CableTo...

Contents
19Follow the easy steps below to set-up
your computer to communicate with
the products.The products will tell your computer that a serial mouse
is connected, and this will make the Interactive Remote
Control work just like your ordinary mouse. Remember
that your mouse driver must be a Microsoft serial driver
or compatible for the product to be able to communicate
with your PC.
Setup procedureu
Turn all units off
u
Follow the User Manuals guide for connecting the
product to a PC.
u
If you have a...

Contents
20Projector:
Special considerations If the Interactive Remote Control does not work when
you have followed the above steps please try the
following1.
Make sure that your mouse driver in Windows
Setup is Microsoft, or IBM PS/2 in Windows 3.1
and 3.11 and Microsoft serial mouse or “standard
serial mouse” in windows95 and WindowsNT. If
another driver is installed please change it and
restart Windows.
If changing the mouse driver does not help (this is
something we have only experienced on...