Kodak CX7525 User Manual

Sharing pictures and videos
www.kodak.com/go/support
 35
Tagging pictures and videos for emailing
First—on your computer
Use Kodak EasyShare software to create an email address book on your 
computer. Then, copy up to 32 email addresses to the camera’s internal 
memory. For details, click the Help button in the Kodak EasyShare software.
Second—tag pictures/videos on your camera
1Press the Share button. Press   to locate a picture/video. 
2Press   to highlight Email  , then press the OK button.
The Email...

Sharing pictures and videos
 36www.kodak.com/go/support
Tagging pictures as favorites
You can preserve your favorite pictures in the Favorites   section of your 
camera’s internal memory, then share them with friends and family.
NOTE:  When you transfer pictures from your camera to your computer, all pictures (including 
favorites) are stored on your computer at full size. Favorite pictures—smaller copies of 
your originals—are loaded back to your camera, so you can share and enjoy more.
Share your...

Sharing pictures and videos
www.kodak.com/go/support
 37
Optional settings
In Favorites mode, press the Menu button to access optional settings.
NOTE:  Pictures taken at the Best (3:2) quality setting are displayed at a 3:2 aspect ratio with a 
black bar at the top of the screen. (See Picture Quality, page 18.)
Removing all favorites from your camera
1Turn the Mode dial to Favorites  .
2Press the Menu button.
3Highlight  , then press the OK button.
All pictures stored in the Favorites section of internal...

 38www.kodak.com/go/support
6Transferring and printing 
pictures
CAUTION:
Install Kodak EasyShare software before connecting the 
camera or optional dock to the computer. Failure to do so 
may cause the software to load incorrectly.
Transferring pictures with the USB cable
1Turn off the camera.
2Plug the labeled   end of the USB cable into 
the labeled USB port on your computer. See 
your computer user’s guide for details.
3Plug the other end of the USB cable into the 
labeled USB port on the camera.
4Tu...

Transferring and printing pictures
www.kodak.com/go/support
 39
Direct printing with a PictBridge printer
Your camera features PictBridge technology, so you can print directly to 
PictBridge printers. You need:
Connecting the camera to the printer
1Turn off the camera and printer.
2Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug 
it into the camera and into an electrical outlet.
IMPORTANT: 
Do not use the AC adapter included with the Kodak EasyShare 
camera dock or printer dock...

Transferring and printing pictures
 40www.kodak.com/go/support
Disconnecting the camera from the printer
1Turn off the camera and printer.
2Disconnect the USB cable from the camera and the printer.
Ordering prints online
Kodak EasyShare print service (provided by Ofoto www.ofoto.com) is one of 
the many online print services offered in the Kodak EasyShare software. You 
can easily:
■Upload your pictures.
■Edit, enhance, and add borders to your pictures.
■Store pictures, and share them with family and...

www.kodak.com/go/support 41
7Troubleshooting
When you have questions about your camera, start here. Additional technical 
information is available in the ReadMe file located on the Kodak EasyShare 
software CD. For updates to Troubleshooting information, see 
www.kodak.com/go/cx7525support.
Camera problems
ProblemCauseSolution
Camera does 
not turn on.Battery is not 
installed correctly or 
is exhausted.Recharge the battery or install a new one 
(page 2).
Camera does 
not turn off; lens 
does not...

Troubleshooting
 42www.kodak.com/go/support
Shutter button 
does not work.Camera is not turned 
on.Turn on the camera 
(page 4).
The camera is 
processing a picture; 
the ready light (near 
the viewfinder) is 
blinking red.Wait until the ready light stops blinking red 
before attempting to take another picture. 
You can take a picture even if the ready light 
is blinking green.
The card or internal 
memory is full.Transfer pictures to the computer (page 38), 
delete pictures from the camera (page 25),...

Troubleshooting
www.kodak.com/go/support
 43
Picture is too 
light.The subject was too 
close for flash.Move so there is at least 2 ft 
(0.6 m) between camera and subject.
The light sensor is 
covered.Hold the camera so your hands or other 
objects do not cover the light sensor (page i).
Too much light. Decrease Exposure Compensation (page 18).
Auto exposure was 
not achieved. To take the best possible pictures, press the 
Shutter button halfway and hold. When 
the ready light glows green, press the...

Troubleshooting
 44www.kodak.com/go/support
Camera screen messages
Picture is too 
dark or 
underexposed.Flash is not on, or the 
subject was too far 
away for the flash to 
be effective.Move so there is no more than 11.8 ft 
(3.6 m) between the camera and the subject; 
6.9 ft (2.1 m) in Telephoto.
Auto exposure was 
not achieved. To take the best possible pictures, press the 
Shutter button halfway and hold. When 
the ready light glows green, press the Shutter 
button the rest of the way down to take...