Kodak CX7330 User Manual

Taking pictures and videos
 14
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy 
shadows. You can change the flash setting in any Still mode; the default flash 
setting is restored when you exit the mode or turn off the camera.
Turning on the flash
Flash Range
Wide Angle  2-11.8 ft (0.6-3.6 m)
Telephoto2-6.9 ft (0.6-2.1 m)
Flash Mode Flash Fires
Auto When the lighting conditions require it.
Off Never
Fill Every time you take a picture, regardless of the...

Taking pictures and videos
 15
Flash settings in each mode
For the best possible pictures, flash settings are preset for each capture mode. 
* When you change to Red-eye in these modes, it remains until you change it.
Icon Capture 
modeDefault 
flash 
settingAvailable flash 
settings 
(press the Flash button 
to change)To return to the 
default flash setting:
AutoAuto* Auto, Flash Off, Fill 
Flash, Red-eyeExit the mode or turn off 
the camera.
SportAuto
NightAuto*
LandscapeOff
Close-upOff
VideoOff None...

Taking pictures and videos
 16
Putting yourself in the picture
The Self Timer creates a 10-second delay between the time you press the 
Shutter button and the time the picture is taken. 
1Place the camera on a flat surface or tripod.
2In any Still mode, press the Self Timer button  .
The Self Timer icon   appears in the status area.
3Compose the scene. Then press the Shutter button halfway and hold to 
set the exposure and focus, then press the rest of the way down. Move 
so that you are in the scene....

Taking pictures and videos
 17
Taking a burst series of pictures
Burst lets you to take up to 3 pictures in quick succession (approximately 3 
frames per second). Burst is ideal for capturing sporting events or objects in 
motion. Flash and Self Timer are disabled when you use Burst. 
Turn on burst
In any Still mode, press the Self Timer/Burst 
button twice.
The Burst icon   appears in the status area.
NOTE:  The setting remains until you change it or turn off the 
camera.
Take the burst pictures
1Press...

Taking pictures and videos
 18
Changing picture-taking settings
You can change settings to get the best results from your camera:
1Press the Menu button. (Some settings are unavailable in some modes.)
2Press   to highlight the setting you wish to change, then press the OK 
button.
3Choose an option, then press the OK button.
4Press the Menu button to exit.
SettingIconOptions
Image Storage
Choose a storage location for 
pictures and videos.
This setting remains until you 
change it.
Auto (default)—the...

Taking pictures and videos
 19
Color Mode
Choose color tones.
This setting remains until you 
turn the Mode dial or turn off 
the camera.
Color (default)—for color pictures.
Black & White—for black-and-white 
pictures.
Sepia—for pictures with a reddish-brown, 
antique look.
NOTE:  EasyShare software also lets you change a 
color picture to black-and-white or sepia.
Unavailable in Video mode.
Set Album
Choose Album names.On or Off.
Pre-select album names before you take 
pictures or videos. Then, all the...

Taking pictures and videos
 20
Customizing your camera
Use Setup to customize your camera settings.
1In any mode, press the Menu button.
2Press   to highlight Setup Menu  , then press the OK button.
3Press   to highlight the setting you wish to change, then press the OK 
button.
4Choose an option, then press the OK button.
5Press the Menu button to exit.
SettingIconOptions
Return to previous menu.  
Default Print Quantity
Choose the default quantity.
Quickview
Briefly display a picture after it is...

Taking pictures and videos
 21
Video Out 
Choose the regional setting that lets you 
connect the camera to a television or 
other external device.NTSC (default)—used in North 
America and Japan; most common 
format.
PAL—used in Europe and China.
Language Choose a language.
Format
CAUTION:
Formatting deletes all 
pictures and videos, 
including those that 
are protected. 
Removing a card 
during formatting may 
damage the card. 
 Memory Card—deletes 
everything on the card; formats the 
card. 
Cancel...

Taking pictures and videos
 22
Pre-tagging for album names
Use the Set Album (Still or Video) feature to pre-select album names before 
you take pictures or videos. Then, all the pictures or videos you take are 
tagged with those album names.
First—on your computer
Use Kodak EasyShare software (V 3.0 or higher, see page 30) to create album 
names on your computer. Then copy up to 32 album names to the album 
name list the next time you connect the camera to the computer. See Kodak 
EasyShare software...

 23
3Reviewing pictures and 
videos
Press the Review button to view and work with your pictures and videos. To 
save battery power, use the optional Kodak EasyShare camera or printer dock, 
or Kodak 3-volt AC adapter. (See www.kodak.com/go/cx7330accessories.)
Viewing single pictures and videos
1Press the Review button.
2Press   to scroll backward or forward through pictures and videos. (For 
fast scrolling, press and hold  .)
3Press the Review button to exit Review. 
NOTE:  Pictures taken at the Best...