Kodak CX7310 User Manual

Installing the software
www.kodak.com/go/support
 24
3Load the software:
Windows OS-based computer—if the install window does not appear, 
choose Run from the Start menu and type d:\setup.exe where d is the 
drive letter that contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install 
icon.
Mac OS 8.6 or 9.x—on the install window, click Continue.
4Follow the on-screen instructions to install the software.
Windows OS-based computer—select Complete to automatically install...

 25www.kodak.com/go/support
5Sharing pictures and 
videos
NOTE:  Tags remain until removed. If a tagged picture or video is copied, the tag is not copied.
Tagging pictures for printing
1Press the Share button.
2Press  to locate a picture.
3Press  to highlight Print , then press the OK button.* 
4Press  to select the number of copies (0 - 99). The default is one. 
Zero removes the tag for that picture.**
The Print icon  appears in the status area.
PicturesVideos
Print (page 25)✔
Email (page 26)✔✔...

Sharing pictures and videos
www.kodak.com/go/support
 26
5Press the OK button.
6Press the Share button to exit.
* To tag all pictures in the image storage location, highlight Print All , press 
the OK button, then select the number of copies as described above. Print All 
is not available in Quickview.
**To remove the print tagging for all pictures in the image storage location, 
highlight Cancel Prts 
, then press the OK button. You cannot cancel prints 
in Quickview.
Printing tagged pictures
When you...

Sharing pictures and videos
 27www.kodak.com/go/support
4To remove a selection, highlight a checked address, then press the OK 
button. To remove all email selections, highlight Clear All.
5Highlight Exit, then press the OK button. 
Your selections are saved. The email icon  appears in the status area.
6Press the Share button to exit.
Third—transfer and email
When you transfer the tagged pictures and videos to your computer, the 
Kodak EasyShare software email screen opens and lets you send the pictures...

www.kodak.com/go/support 28
6Transferring and printing 
pictures
CAUTION:
Install Kodak EasyShare software before connecting the 
camera or optional camera dock or printer dock to the 
computer. Failure to do so may cause the software to load 
incorrectly.
Transferring pictures and videos with the USB 
cable
1Turn off the camera.
2Plug the labeled  end of the USB cable 
into the labeled USB port on your computer. 
See your computer user’s guide for details.
3Plug the other end of the USB cable into the...

Transferring and printing pictures
 29www.kodak.com/go/support
Ordering prints online
Kodak EasyShare print service (provided by Ofoto at www.ofoto.com) is one of 
the many online print services offered in the Kodak EasyShare software. You 
can easily:
■Upload your pictures.
■Edit, enhance, and add borders to your pictures.
■Store pictures, and share them with family and friends.
■Order high-quality prints, photo greeting cards, frames, and albums—and 
have them delivered to your door.
Printing from an...

www.kodak.com/go/support 30
7Troubleshooting
When you have questions about your camera, start here. Additional technical 
information is available in the ReadMe file located on the Kodak EasyShare 
software CD. For updates to Troubleshooting information, visit 
www.kodak.com/go/cx7310support.
Camera problems
ProblemCauseSolution
Camera does not 
turn on.Batteries are not 
installed correctly.Install new batteries (page 2) or 
charge rechargeable batteries.
Camera does not 
turn off.Camera has locked...

Troubleshooting
 31www.kodak.com/go/support
In Review mode, a 
blue or black screen 
is displayed instead 
of a picture.File format is 
unrecognized.Transfer the picture to the computer 
(
page 28).
Shutter button does 
not work.Camera is not turned on.Turn on the camera (page 4).
Camera is processing a 
picture; the ready light 
(near the viewfinder) is 
blinking red.Wait until the ready light stops 
blinking red before attempting to take 
another picture.
Card or internal memory 
is full.Transfer...

Troubleshooting
www.kodak.com/go/support
 32
Picture is too dark or 
underexposed.Flash is not on.Turn on the flash (page 11).
Subject is too far away 
for the flash to be 
effective.Move so there is no more than 7.9 ft 
(2.4 m) between the camera and the 
subject.
Subject is in front of a 
bright light (backlit).Use Fill flash (page 11) or change your 
position so light is not behind the 
subject.
Not enough light.Increase Exposure Compensation 
(
page 12).
Camera does not 
recognize SD/MMC 
card.Card...

Troubleshooting
 33www.kodak.com/go/support
Camera/computer communications
ProblemCauseSolution
The computer 
cannot 
communicate 
with the camera.There is a problem with 
the configuration of the 
USB port on the computer.See this file on the EasyShare software 
CD: USB.html Or, visit 
www.kodak.com/go/ 
camerasupport
Camera power is off.Turn on the camera (page 4).
Batteries are exhausted or 
are not charged.Install new batteries (page 2) or 
charge rechargeable batteries.
Some Advanced Power...