Kodak C530 Users Guide

							Transferring and printing pictures
www.kodak.com/go/support
 15
Transferring pictures with the USB cable
1Turn off the camera.
2Plug the labeled   end of the USB cable into the 
labeled USB port on your computer. See your 
computer user’s guide for details.
3Plug the other end of the USB cable into the labeled 
USB port on the camera.
4Tu r n   o n   t h e   c a m e r a .
Kodak EasyShare software opens on your computer. 
The software prompts you through the transfer 
process. 
NOTE:  Visit www.kodak.com/go/howto for an online tutorial on connecting. 
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.

Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 19)

Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or visit 
www.kodak.com/go/c530accessories.
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							16www.kodak.com/go/support Transferring and printing pictures
Printing pictures 
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or 
without a computer. Purchase this and other accessories at a dealer of Kodak 
products or visit www.kodak.com/go/c530accessories.
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to 
PictBridge enabled printers. You need:
Connecting the camera to a PictBridge enabled printer
1Turn off the camera and printer.
2Connect the appropriate USB cable from the camera to the printer. (See your 
printer user guide or visit www.kodak.com/go/c530accessories.

Camera with fully charged batteries
PictBridge enabled printer

USB cable (may be sold separately)
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							Transferring and printing pictures
www.kodak.com/go/support
 17
Printing from a PictBridge enabled printer
1Turn on the printer. Turn on the camera. 
The PictBridge logo is displayed, followed by the current picture and menu. (If no 
pictures are found, a message is displayed.) If the menu interface turns off, press any 
button to redisplay it.
2Press   to choose a printing option, then press the OK button.
NOTE:  During direct printing, pictures are not permanently transferred or saved to the computer or printer. 
To transfer pictures to your computer, see page 14. In Favorites mode, the current favorite picture 
is displayed.
Current PicturePress   to choose a picture. Choose the number of copies.
Tagged PicturesIf your printer is capable, print pictures that you tagged for 
printing and choose a print size.
Index PrintPrint thumbnails of all pictures. This option requires one or more 
sheets of paper. If the printer is capable, choose a print size.
All PicturesPrint all pictures in internal memory, on a card, or in Favorites. 
Choose the number of copies.
Image StorageAccess internal memory, a card, or Favorites.
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							18www.kodak.com/go/support Transferring and printing pictures
Disconnecting the camera from a PictBridge enabled printer
1Turn off the camera and printer.
2Disconnect the USB cable from the camera and the printer.
Using a printer that is not PictBridge enabled
For details on printing pictures from your computer, click the Help button in the Kodak 
EasyShare software.
Ordering prints online
Kodak EasyShare Gallery (www.kodakgallery.com) is one of the many online print 
services offered in the Kodak EasyShare software. You can easily:

Upload your pictures.

Edit, enhance, and add borders to your pictures.

Store pictures, and share them with family and friends.

Order high-quality prints, photo greeting cards, frames, and albums—and have 
them delivered to your door.
Printing from an optional SD/MMC card

Automatically print tagged pictures when you insert your card into a printer with 
an SD/MMC card slot. See your printer user’s guide for details.

Make prints at an SD/MMC card-capable Kodak picture maker. (Contact a location 
prior to visiting. See www.kodak.com/go/picturemaker.)

Take the card to your local photo retailer for professional printing.
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							Transferring and printing pictures
www.kodak.com/go/support
 19
Dock compatibility for your camera
Purchase camera docks, printer docks, and other accessories at a dealer of Kodak 
products or visit www.kodak.com/go/c530accessories.
Kodak EasyShare dockDocking configuration

printer dock plus series 3

series 3 printer docks and 
camera docks
Others, including:

printer dock

printer dock plus

printer dock 6000

camera dock 6000

printer dock 4000

camera dock II

LS420, LS443 camera dockNot compatible
Custom dock 
insert 
Dock
Custom dock 
insert 
Kodak  dock 
adapter kit D-22
Dock
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							20www.kodak.com/go/support
4Doing more with your camera
Using the self-timer
NOTE: The self timer cancels after you take the picture, record the video, or turn off the 
camera.
Using the self timer for video
Use the same procedure as above, but:

Turn the Mode dial to video  .

Press the Shutter button completely down.
NOTE:  The video stops when you press the Shutter button or when no storage space remains.
Choose Self Timer  .
In Auto mode, press the Menu button.
1
2
4
5
Place camera on a tripod or flat surface.
Compose the scene.
Press the Shutter button. 10-second delay (so you have time to get into the 
scene)
2-second delay (for a steady, auto-shutter release on a 
tripod)
3
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Doing more with your camera
www.kodak.com/go/support
 21
Running a slide show
Use the Slide Show to display your pictures and videos on the LCD screen. 
To run a slide show on a television or on any external device, see page 22.
Starting the slide show
1Press the Review button, then press the Menu button.
2Press   to highlight Slide Show  , then press the OK button.
3Press   to highlight Begin Show, then press the OK button.
Each picture and video is displayed once, in the order in which you took them.
4To cancel the Slide Show, press the OK button.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display 
interval from 3 to 60 seconds.
1On the Slide Show menu, press   to highlight Interval, then press the 
OK button.
2Select a display interval.
To scroll through the seconds quickly, press and hold  .
3Press the OK button.
The interval setting remains until you change it.
DownloadedqFromqcameraEusermanualBcomqKodakqManuals 
						

							22www.kodak.com/go/support Doing more with your camera
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1On the Slide Show menu, press   to highlight Loop, then press the OK button.
2Press   to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is 
exhausted. This setting remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device 
equipped with a video input using an optional audio/video cable. Video input devices 
include a compatible Kodak EasyShare printer dock or camera dock (see page 19).
NOTE:  Ensure that the Video Out setting (NTSC or PAL) is correct (see page 28). The slide show stops if you 
connect or disconnect the cable while the slide show is running.
Image quality on a television screen may not be as good as on a computer monitor or when printed.
See the printer dock or camera dock user’s guide for more details.
Purchase these and other accessories at a dealer of Kodak products or visit 
www.kodak.com/go/c530accessories.
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							Doing more with your camera
www.kodak.com/go/support
 23
Copying pictures and videos
You can copy pictures and videos from a card to internal memory or from internal 
memory to a card.
Before you copy, make sure that:

A card is inserted in the camera.

The camera’s picture storage location is set to the location from which you are 
copying. See Image Storage, page 26.
Copy pictures or videos:
1Press the Review button, then press the Menu button.
2Press   to highlight Copy  , then press the OK button.
3Press   to highlight an option.
4Press the OK button.
NOTE:  Pictures and videos are copied, not moved. To remove pictures and videos from the original location 
after copying, delete them (see page 13). 
Tags that you applied for print, email, and favorites are not copied. Protection settings are not 
copied. To apply protection to a picture or video, see page 12.
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals 
						

							24www.kodak.com/go/support Doing more with your camera
Choosing a flash setting
NOTE: 

Off and Fill flash options revert to Auto when the camera is turned off.

When the picture is taken with Auto or Fill flash selected, the camera flashes 
twice: once to set the exposure and once to take the picture. 
Flash modesFlash fires
Auto 
FlashWhen the lighting conditions require it.
FillEvery time you take a picture, regardless of the lighting conditions. Use 
when the subject is in shadow or is “backlit” (when light is behind the 
subject). 
Red-eyeThree times: once to set the exposure, once to reduce red-eye, and once 
to take the picture.
OffFlash never fires.
Flash button Press the  button repeatedly to scroll 
through flash options.
(see Flash modes table). Press OK.
The current flash mode is shown in the 
LCD status area.
;ownloadedRqromRcamera9usermanual8comRGodakR”anuals