Kodak C140 User Manual

							Using the menu button
www.kodak.com/go/support
 25
Long Time Exposure
Choose how long the shutter 
stays open.None 
0.5, 1.0, 2.0, 4.0 seconds
Color Mode
Choose color tones.
Unavailable in Video mode.High Color
Natural Color
Low Color
Black & White
Sepia—for a reddish-brown, antique look.
NOTE:  EASYSHARE Software also lets you change a color picture to 
black-and-white or sepia.
White Balance
Choose your lighting 
condition.Auto—automatically corrects white balance. Ideal for general 
picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs. 
Ideal for indoor pictures under tungsten or halogen lighting 
without flash.
Fluorescent—corrects the green cast of fluorescent lighting. 
Ideal for indoor pictures under fluorescent lighting without 
flash.
Open Shade—for pictures in shade in natural lighting.
Face Detect Capture
Choose if faces get focus 
priority.On—In SCN modes designed for pictures of people, the 
camera attempts to focus on faces.
Off
Press Menu, , 
, and OK to access 
settingsCapture Options
IMPORTANT: 
Your camera offers a built-in Help system. 
See page 43.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							26www.kodak.com/go/support Using the menu button
Exposure Metering
Evaluate light levels at specific 
areas of a scene.Multi-Pattern—evaluates lighting conditions throughout 
the image to give an optimum picture exposure. Ideal for 
general picture taking.
Center-Weight—evaluates the lighting conditions of the 
subject centered in the LCD. Ideal for backlit subjects.
Center-Spot—similar to Center-weight, except the metering 
is concentrated on a smaller area of the subject centered in the 
LCD.
AF Zone
Select a large or concentrated 
area of focus.Multi-Zone—evaluates 5 zones to give an even picture 
focus. Ideal for general picture taking.
Center-Zone—evaluates the small area centered in the LCD. 
Ideal when you need precise focus.
ISO Speed
Control the camera’s 
sensitivity to light.See Camera specifications, page 46.
Sharpness
Control picture sharpness.High
Normal 
Low
Focus Mode
Select a large or concentrated 
area of focus.Auto—for general picture-taking.
Macro—for sharpness and detail in pictures at close range. 
Use available light instead of flash, if possible. The camera 
automatically sets the focus distance depending on the zoom 
position. 
Infinity—for distant subjects; auto-focus framing marks are 
unavailable.
Burst
Take multiple pictures while 
the Shutter button is pressed.On—the camera takes up to 3 pictures while the Shutter 
button is pressed.
Off
Press Menu, , 
, and OK to access 
settingsCapture Options
IMPORTANT: 
Your camera offers a built-in Help system. 
See page 43.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Using the menu button
www.kodak.com/go/support
 27
Video settings
Exposure Compensation
Make a scene appear 
lighter/darker before a picture 
is taken.+/-2.0 EV with 1/3 EV step
Blur Warning
A hand icon indicates picture 
sharpness.On
Off
Green—Picture is sharp enough for an acceptable 4 x 6-inch 
(10 x 15 cm) print.
Yellow—Picture may be sharp enough for an acceptable 4 x 
6-inch (10 x 15 cm) print or sharpness is not determined. (You 
may want to view on a computer monitor before printing.)
Red—Picture is not sharp enough for an acceptable 4 x 6-inch 
(10 x 15 cm) print.
White—Print sharpness is not determined.
Press Menu, , 
, and OK to access 
settingsVideo Options
IMPORTANT: 
Your camera offers a built-in Help system. 
See page 43.
Video Size
Choose a video resolution.See Camera specifications, page 46.
Press Menu, , 
, and OK to access 
settingsCapture Options
IMPORTANT: 
Your camera offers a built-in Help system. 
See page 43.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							28www.kodak.com/go/support Using the menu button
Using the Setup tab
Use Setup to customize your camera.
Press Menu,   to highlight 
Setup, then   to access 
settingsSetup Options
IMPORTANT: 
Your camera offers a built-in 
Help system. See page 43.
LCD Brightness
Choose LCD brightness.Power Save
High Power
Image Storage
Choose a storage location for 
pictures/videos.Auto—the camera uses the card if one is in the 
camera. If not, the camera uses internal memory.
Internal Memory—the camera always uses 
internal memory, even if a card is installed.
Set Tag
Create tag names and assign them to 
pictures/videos. See page 35.New Tag—create a tag.
Delete Tag—delete a tag.
Clear All—cancel selected tags.
Date Stamp
Imprint the date on pictures.Choose a date option, or turn off the feature. 
Red Eye Reduction
Choose how you want to reduce red eye.Preflash—red eye preflash fires before the 
picture is taken. 
Digital Correction—red eye preflash does not 
fire; the camera corrects red eye.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Using the menu button
www.kodak.com/go/support
 29
Share Button Setting
Choose how pictures/videos are handled 
when you press the Share button (via 
EASYSHARE Software for WINDOWS-OS 
only).
NOTE:  Some online services limit video file 
sizes. Use EASYSHARE Software or 
choose a preferred online service.
Favorite and Upload—pictures/videos are 
tagged as Favorites and uploaded to your 
preferred online service when you connect to your 
computer or network. 
Favorite—pictures/videos are tagged as 
Favorites (5-star in EASYSHARE Software, on your 
computer).
Upload—pictures/videos are uploaded to your 
preferred online service when you connect to your 
computer or network.
Camera Sounds
Choose sound effects.On
Shutter Only
Off
Date & TimeSet date and time.
Auto Power Off
Choose inactivity time until camera turns 
off.10 minutes 
5 minutes
3 minutes
1 minute
Video Out 
Choose the regional setting that lets you 
connect the camera to a television or other 
external device.NTSC—used in North America and Japan; most 
common format.
PAL—used in Europe and China.
LanguageChoose your language.
Reset Camera
Reset settings to their default.
Press Menu,   to highlight 
Setup, then   to access 
settingsSetup Options
IMPORTANT: 
Your camera offers a built-in 
Help system. See page 43.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							30www.kodak.com/go/support Using the menu button
Format
CAUTION:
Formatting deletes all 
pictures/videos, including those 
that are protected. Removing a 
card during formatting may 
damage the card. 
Memory Card—deletes everything on the card; 
formats the card. 
Cancel—exits without making a change.
Internal Memory—deletes everything in 
internal memory including email addresses and tag 
names; formats the internal memory.
About
View camera information.
Press Menu,   to highlight 
Setup, then   to access 
settingsSetup Options
IMPORTANT: 
Your camera offers a built-in 
Help system. See page 43.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							www.kodak.com/go/support 31
5Transferring, printing, tagging
CAUTION:
Before connecting any cables, install the software that was 
included with your camera. Failure to do so may cause the 
software to load incorrectly.
Installing the software
1Close all open software applications before starting the installation.
NOTE: If running WINDOWS OS and installing EASYSHARE Software from the 
Kodak Web site, do not close the WinZip application. If prompted, allow 
EASYSHARE Software to access the Internet. 
2Place the KODAK EASYSHARE Software CD into the CD-ROM drive.
3Load the software:
WINDOWS OS
—if the install window does not appear, choose Run from the Start 
menu and type d:\setup.exe where d is the drive letter that contains the CD.
MAC OS X
—double-click the CD icon on the desktop, then click the Install icon.
4Follow the on-screen instructions to install the software.
NOTE:  When prompted, register your camera and software. Registering lets you sign up for information 
that keeps your system up-to-date. To register later, visit 
www.kodak.com/go/register.
5If prompted, restart the computer.
For software help, click the Help button in EASYSHARE Software.
Downloaded From camera-usermanual.com Kodak Manuals 
						

							32www.kodak.com/go/support Transferring, printing, tagging
Transferring pictures/videos
Using the USB cable
Using other options
You can also use a KODAK Card Reader to transfer your pictures/videos.
Purchase accessories www.kodak.com/go/c140accessories
Learn more about connecting www.kodak.com/go/howto
Turn on the camera.1
2
Connect the KODAK 
USB Cable, Model 
U-8 (may be 
included).
Downloaded From camera-usermanual.com Kodak Manuals 
						

							Transferring, printing, tagging
www.kodak.com/go/support
 33
Printing pictures
Direct printing with a KODAK All-in-One Printer
Your camera is compatible with PICTBRIDGE Technology, so you can print directly to 
PICTBRIDGE enabled Printers. You need a camera with fully charged batteries, a 
PICTBRIDGE enabled Printer, and a USB cable.
Connecting the camera to a KODAK All-in-One Printer
1Tu r n  off the printer. Turn on the camera.
2Connect the appropriate USB cable from the camera to the printer.
The PICTBRIDGE logo is displayed, followed by the current picture and menu. (If no 
pictures are found, a message is displayed.) If the menu turns off, press any button to 
redisplay it.
3Highlight a printing option, then press OK.
Current Picture—Press   to choose a picture. Choose the number of copies.
Tagged Pictures—Print pictures that you tagged for printing and choose a print 
size.
Index Print—Print thumbnails of all pictures. (This option requires one or more 
sheets of paper.) If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory or on a card. Choose the 
number of copies.
Image Storage—Access Auto or Internal Memory.
NOTE:  During direct printing, pictures are not permanently transferred or saved to the printer. To transfer 
pictures to your computer, see page 32.
Purchase cables, accessories www.kodak.com/go/c140accessories
Downloaded From camera-usermanual.com Kodak Manuals 
						

							34www.kodak.com/go/support Transferring, printing, tagging
Disconnecting the camera from a KODAK All-in-One Printer
1Turn off the camera and printer.
2Disconnect the USB cable from the camera and the printer.
Using a printer that is not PICTBRIDGE enabled
After you transfer pictures from the camera to your computer, you can print them from 
EASYSHARE Software. For details, see Help in EASYSHARE Software.
Ordering prints online
KODAK Gallery (www.kodakgallery.com) is one of the many online print services 
offered in EASYSHARE Software. You can easily:
■Upload your pictures.
■Edit, enhance, and add borders to your pictures.
■Store pictures, and share them with family and friends.
■Have prints, photo greeting cards, frames, and albums delivered to your door.
Printing from an optional SD or SDHC Card
■Automatically print tagged pictures when you insert your card into a printer with 
an SD/SDHC Card slot. See your printer user’s guide for details.
■Make prints at an SD/SDHC Card-capable KODAK Picture Kiosk. (Contact a 
location prior to visiting. Visit www.kodak.com/go/picturemaker.)
■Take the card to your local photo retailer for professional printing.
Downloaded From camera-usermanual.com Kodak Manuals