Kodak C135 User Manual

							Setting up your camera
www.kodak.com/go/support
 4
Inserting an SD or SDHC Card (not included)
Yo u  must insert an SD or SDHC Card (up to 32 GB) to store pictures/videos.
NOTE:  Your camera also accepts EYE-FI Cards, X2 or higher, with a firmware version of 4.5174 or higher. 
View and update firmware using the Eye-Fi Center Software that accompanies the card.
CAUTION:
A card can only be inserted one way; forcing it may cause 
damage. Inserting or removing a card while the camera is on may 
damage the pictures, the card, or the camera.
Purchase accessories www.kodak.com/go/accessories
1Turn off the camera.
2Insert a card until 
it clicks.
3
Turn on the camera.
SD/SDHC Card (Accessory) 
						

							5www.kodak.com/go/support Setting up your camera
Closing the doors
1
2
Close inner battery 
door.
Close outer battery 
door. 
						

							Setting up your camera
www.kodak.com/go/support
 6
Turning on the camera
Setting the language and date/time
NOTE:  To change language in the future, use the Setup Menu (see page 36).
to change current field.
for previous/next field.
OKto accept. At the prompt, press OK.to change.
OKto accept. Language:
Date/Time: 
						

							7www.kodak.com/go/support
2Installing, setting up software
Start sharing—in 2 easy steps 
Installing the KODAK Share Button App
IMPORTANT: To enable the camera Share button for email and social network sharing, 
you must install and set up the KODAK Share Button App.
1Verify that the computer is connected to the Internet.
2Turn on the camera.
3Using the KODAK Camera USB Cable, connect the 
camera to a computer USB port.
4Watch your computer—when the KODAK Camera 
Setup App prompts you, click Install Now. (If your 
computer asks you to allow the KODAK Camera 
Setup App to run, click Allow.)
5Click Finish.
Did you successfully install the software? 
See “Setting up the Share Button App (one-time setup)” on page 8.
Did you have trouble installing the software? 
See “If software installation does not start after several minutes” on page 8.
• Install the Share Button App.
• Set up the Share Button App. One-time setup on your computer:
• Take pictures/videos.
• Choose pictures/videos to share.
• Connect camera to computer—share!
Then, on your camera:1
2 
						

							Installing, setting up software
www.kodak.com/go/support
 8
If software installation does not start after several minutes
1Verify that the computer is connected to the Internet.
2Open My Computer.
3Open the KODAK Setup App to start the installation. 
If the installer still doesn’t start
1Download it from www.kodak.com/go/camerasw.
2After it’s downloaded, double-click to install it.
Setting up the Share Button App (one-time setup)
After you install the Share Button App on your computer and click Finish (see page 7), 
the App automatically launches.* It prompts you through a one-time setup of your 
email and social networking preferences. The addresses and sites that you choose 
appear on your camera when you press the Share button.
If the Share Button App doesn’t launch
The camera may have timed out. Simply unplug the camera and turn it off. Plug it 
back in and turn it on. When the App launches, perform the one-time setup, above. 
						

							9www.kodak.com/go/support Installing, setting up software
A helpful hint: adding new email addresses to your camera
For future reference, the easiest way to add email addresses to your camera is using 
the Share Button App 
on your computer. 
1Turn on your camera.
2Using the KODAK Camera USB Cable, connect the camera to a computer USB port.
The Share Button App starts.
3Click Email List Setup.
4Add email addresses.
The next time you connect the camera to the computer, the email addresses are added 
to your camera.
After setting up the Share Button App
Congratulations—you’re ready to share!
■Take some pictures/videos (see page 10).
■Choose pictures/videos to share (see page 19).
■Connect the camera to your computer (see page 7).
Each time you connect:
• Pictures/videos are transferred to your computer 
• The Share Button App emails and/or shares your chosen pictures/videos on your social 
networking sites. 
						

							www.kodak.com/go/support 10
3Taking pictures/videos
Taking pictures
1The camera turns on in Auto mode. 
(If it’s in a different mode, press   until the 
LCD displays 
Auto .)
2Compose the picture.
3Press the Shutter button.
Taking a video
1Press the Video Record  button to start 
recording.
2To stop recording, press the Video Record   
button again.
To review and work with videos, see page 22. 
						

							11www.kodak.com/go/support Taking pictures/videos
Reviewing the picture/video just taken
After you take a picture/video, the LCD briefly displays the picture or the first frame of 
a video.
NOTE:  The camera captures audio during recording, but audio cannot be heard during playback on the 
camera. Audio 
can be heard when the video is played on a computer or when the camera is 
connected to a TV (see page 28). 
To review pictures/videos anytime, see page 22.
Delete the current picture/video Play/pause a picture/video
While a picture/video appears on 
your camera screen, you may: 
						

							Taking pictures/videos
www.kodak.com/go/support
 12
Understanding the picture-taking icons
Know when your batteries need attention
The battery level icon appears when the battery requires your attention. 
Full
Three quarters
Half
One Quarter
Critical
Purchase extra batteries for your special eventwww.kodak.com/go/accessories
Battery level Capture mode
Pictures/time remaining
Zoom indicator
Keyword tag Self timer
Flash mode
Exposure compensation
Time/Date stamp
Video/time remaining 
						

							13www.kodak.com/go/support Taking pictures/videos
Using the digital zoom
1Use the LCD to frame your subject.
2To zoom in, press Telephoto (T). 
To zoom out, press Wide Angle (W).
The zoom slider shows the zoom level on the LCD.
3Ta ke  t h e  p i c t u r e.
NOTE:  You may notice decreased image quality when using digital 
zoom.
Using the flash
Press the Flash button repeatedly until the LCD displays the desired flash mode.
Flash modesFlash fires
AutoWhen the lighting conditions require it.
Fill (Flash On)Every time you take a picture, regardless of the lighting 
conditions. Use when the subject is in shadow or is “backlit” 
(when the light is behind the subject).
NOTE:  Not available in Auto mode.
Red-eye 
ReductionPreflash A preflash fires, shrinking the eye pupil, before the picture is 
taken.
OffNever
Flash button